Overclock.net › Forums › Case Mods & Cases › Computer Cases › [Official] Case Labs Owners Club
New Posts  All Forums:Forum Nav:

[Official] Case Labs Owners Club - Page 735

post #7341 of 22513
fcpu.com has the Akasa thumb.gif

http://www.frozencpu.com/cat/l3/g34/c135/s288/list/p1/Bay_Devices-Flash_Memory_Card_Readers-525_Readers-Page1.html
post #7342 of 22513
Thanks a lot. This review has me concerned though:
Quote:
This product isn''t plug and play and the drivers and software updates at Akasa.com will not fix the problem. The product will show up as an unknown device under windows 7 and no matter what you try to do you will not find a driver that works with this product. It will read the USB 3.0 correctly but no 2.0 USB and no card reading what so ever. I read support forum after support forum and never found a solution. Nice looking product - to bad it doesn''t work as advertised.
post #7343 of 22513
Been reading for a while, but first post... Just ordered my Merlin SM8!! And now the anticipation builds...
post #7344 of 22513
Quote:
Originally Posted by geggeg View Post

Thanks a lot. This review has me concerned though:

I'm sure Akasa will want to make sure it works with win7. Probably just a bad-luck draw on that fella. You can always get your money back if its faulty or get the xigmatek.

Btw, aren't most devices that use memory cards now mountable via usb through the device? Man, its been a long, long time since I did actually used a card reader tongue.gif

Quote:
Originally Posted by moosubi View Post

Been reading for a while, but first post... Just ordered my Merlin SM8!! And now the anticipation builds...


Congratulations thumb.gif
post #7345 of 22513
They are but I want to be able to use multiple cards at the same time for backup (RAW->JPEG) and more compatibility without having to keep a dozen different type of wires. I will likely check out that Xigmatek one and see. Thanks!
post #7346 of 22513
Quote:
Originally Posted by iBored View Post

When two-tone isn't enough...


And btw, I'm putting a 360 in the roof, so how do I cover up the last hole?
The blanking plate can't fit because of the rad. Is there something I can get from caselab's accessories list?

http://www.caselabs-store.com/fan-hole-cover-plate-120mm/
post #7347 of 22513
Terrible pic quality but a snapshot of the R9 280x I just picked up off the marketplace and I added a little yellow to the PCIe cables to match the rest of the cables.

post #7348 of 22513
I have been thinking about getting the STH10 for a while now and finally have the funds to proceed with an order. The number of options has my head spinning though. I want to make sure I understand everything before I make an order and I have a few questions.

-I want to put two 480mm rads in the top, does the 120MM extended top allow me to add another radiator somehow?
-Is there enough room to run 1/2"x3/4" tubing through the grommet holes?
-If I choose the 120.3 mid plates, can I have fans on those along with two side mount 480mm rads in the top?

Also, does the STH10 have the most room for radiators? Not counting the TX cases, that is a little big for me.
Ananke
(13 items)
 
   
CPUMotherboardGraphicsRAM
5930k Asus Rampage V Extreme EVGA GeForce GTX 1080 Ti FTW3 G.SKILL TridentZ Series 64GB (F4-3200C14Q-64GTZ) 
Hard DriveCoolingOSMonitor
Samsung 950 Pro Custom water Windows 10 ASUS ROG Swift PG279Q 
KeyboardPowerCaseMouse
Corsair K95 RGB PLATINUM EVGA SuperNOVA 1300 G2 Case Labs MAGNUM STH10 Logitech G502 Proteus Spectrum 
Mouse Pad
Glorius PC gaming XXL 
CPUMotherboardGraphicsRAM
i7 3930K Asus Rampage IV Extreme EVGA 780 Classified 32 GB GSkill Trident X 2400MHz 
Hard DriveCoolingOSMonitor
Samsung 840 Pro 256 Custom Water Windows 8 Pro x64 CatLeap 27" IPS 
PowerCase
Corsair HX750 Corsair 800D 
  hide details  
Reply
Ananke
(13 items)
 
   
CPUMotherboardGraphicsRAM
5930k Asus Rampage V Extreme EVGA GeForce GTX 1080 Ti FTW3 G.SKILL TridentZ Series 64GB (F4-3200C14Q-64GTZ) 
Hard DriveCoolingOSMonitor
Samsung 950 Pro Custom water Windows 10 ASUS ROG Swift PG279Q 
KeyboardPowerCaseMouse
Corsair K95 RGB PLATINUM EVGA SuperNOVA 1300 G2 Case Labs MAGNUM STH10 Logitech G502 Proteus Spectrum 
Mouse Pad
Glorius PC gaming XXL 
CPUMotherboardGraphicsRAM
i7 3930K Asus Rampage IV Extreme EVGA 780 Classified 32 GB GSkill Trident X 2400MHz 
Hard DriveCoolingOSMonitor
Samsung 840 Pro 256 Custom Water Windows 8 Pro x64 CatLeap 27" IPS 
PowerCase
Corsair HX750 Corsair 800D 
  hide details  
Reply
post #7349 of 22513
Quote:
Originally Posted by geggeg View Post

Anyone have recommendations for 5 1/4 bay USB 3.0 port devices? I would prefer one with an in-built card reader- CF and SD is enough for me. Thanks!

I use this one here http://www.amazon.com/SilverStone-Multifunction-Device-Reader-Silverstone/dp/B00KG5A7LG/ref=sr_1_5?ie=UTF8&qid=1401745826&sr=8-5&keywords=SILVERSTONE+USB+3.0+CARD+READER

Nice thing about this one is you can mount two ssds inside it too. Not that you have a space issue with your case biggrin.gif
post #7350 of 22513
This. I'm having a difficult time trying to figure out where the confusion lies.

put this plate on on top of the case either the 120mm or the 140mm depending if the fan whole is 120mm or 140mm.

http://www.caselabs-store.com/fan-hole-cover-plate-120mm/


Normaly the fan whole plates are mounted inside of the case and the screws are run into the plate from the top of the case. In this application the 360 radiator is blocking part of the fan whole not leaving enough room to mount the fan whole plate inside of the case. The fan whole plate has to be cut to fit if mounted inside of the case. If the fan whole plate is mounted on top of the case then the screws would have to be installed into the plate from inside of the case. The screw wholes on the fan whole plate is threaded.

Using the blanking plate on the other side is a good idea and you don't need nuts....just screw the plate from the inside instead of the outsid thumb.gif

Great idea. Better than using nuts on the screws if the screws where installed from the top of the case down.

You could add fill ports to the fan whole plate if needed?
New Posts  All Forums:Forum Nav:
  Return Home
  Back to Forum: Computer Cases
Overclock.net › Forums › Case Mods & Cases › Computer Cases › [Official] Case Labs Owners Club