Overclock.net › Forums › Case Mods & Cases › Computer Cases › [Official] Case Labs Owners Club
New Posts  All Forums:Forum Nav:

[Official] Case Labs Owners Club - Page 764

post #7631 of 22174
Quote:
Originally Posted by CasP3r View Post

Yeah, measure twice three times ... seven times and cut once, isn't that what they say?
.

I don't know about them, but that's what I say! smile.gif

The most difficult bends, for me at least, are going along two different planes. I had to do a couple of attempts on one. Then after tha I finally got the hang of it.
post #7632 of 22174
Quote:
Originally Posted by XNine View Post

I don't know about them, but that's what I say! smile.gif

The most difficult bends, for me at least, are going along two different planes. I had to do a couple of attempts on one. Then after tha I finally got the hang of it.

And that makes a crap ton of sense. smile.gif

I can imagine those ones being the most difficult. I think I'll have at least one those no matter how I decide to make my runs, but with a couple of 90° fittings I can avoid most of them. Using fittings for all the bends would most likely be the easiest way of doing things and I like the look of that as well, but that would mean another couple hundred euros in fittings, soo... That's not an option right now. I'll rather buy a little bit more tubing. tongue.gif
post #7633 of 22174
Quote:
Originally Posted by FrancisJF View Post

Modded front to fit 360 radiator in push/pull since 360 rad mount doesn't fit... First time kind of modding on my SM5
Warning: Spoiler! (Click to show)



Sick! Looks great.
post #7634 of 22174
Guys I'm having trouble deciding between the S3 and the S5. Pardon me if this is not the right thread for this topic as I can make my own thread I just figured you guys would know best here.

I'm looking to cool a 4790K and a 290X with 2 x RX240 rads and a D5 pump + EK 150 Res attached via EK pump top. I'm trying to determine space requirements as my main concern is figuring out the most convenient spots to place my rads so that I can install a drain line and make flushing my loop pain free. Having to take my loop apart every 6 month is what turned me off from WCing (after years of doing it) last year but I just couldn't stay away biggrin.gif. So if any of you have some suggestions or advice for me to get my feet wet again I'd be very appreciative.
post #7635 of 22174
My SMA8 with a top mount 560 radiator.

post #7636 of 22174
Quote:
Originally Posted by PuffinMyLye View Post

Guys I'm having trouble deciding between the S3 and the S5. Pardon me if this is not the right thread for this topic as I can make my own thread I just figured you guys would know best here.

I'm looking to cool a 4790K and a 290X with 2 x RX240 rads and a D5 pump + EK 150 Res attached via EK pump top. I'm trying to determine space requirements as my main concern is figuring out the most convenient spots to place my rads so that I can install a drain line and make flushing my loop pain free. Having to take my loop apart every 6 month is what turned me off from WCing (after years of doing it) last year but I just couldn't stay away biggrin.gif. So if any of you have some suggestions or advice for me to get my feet wet again I'd be very appreciative.



S3 w/ MVI Impact, proven combo. A page or two back, there's a fully loaded S3 with enough wc to cool a cpu and gpu. Slap on a Full mb/cpu combo block and its an epic little build.

S5 is matx with five slots, while the S3 is m-itx w/ three slots. The S5 is deeper which, imho, makes it a bit awkward.





]
Quote:
Originally Posted by kgtuning View Post

My SMA8 with a top mount 560 radiator.


Is that custom mounted? didn't see an option for a top mount like that on CL's site.
Edited by wermad - 6/23/14 at 6:40pm
post #7637 of 22174
Quote:
Originally Posted by wermad View Post

S3 w/ MVI Impact, proven combo. A page or two back, there's a fully loaded S3 with enough wc to cool a cpu and gpu. Slap on a Full mb/cpu combo block and its an epic little build.

S5 is matx with five slots, while the S3 is m-itx w/ three slots. The S5 is deeper which, imho, makes it a bit awkward.

Thanks I'll take a look at that post. As for the board I'm waiting on the Maximus VII Z97 board which should be out soon. I already have a CPU block though so I'm not sure I'll be able to WC the MB unless there is a good block specifically for that.
post #7638 of 22174
Remember the Z87 Vi Impact supports DC if you can't wait for the Vii Impact to be released. And it supports this biggrin.gif :



post #7639 of 22174
Quote:
Originally Posted by wermad View Post

Remember the Z87 Vi Impact supports DC if you can't wait for the Vii Impact to be released. And it supports this biggrin.gif :




Those are very nice MB blocks thumb.gif. What do you mean by DC though?
post #7640 of 22174
Quote:
Originally Posted by PuffinMyLye View Post

Those are very nice MB blocks thumb.gif. What do you mean by DC though?
Devil's Canyon.
Claymore
(24 items)
 
  
CPUMotherboardGraphicsRAM
Intel i7 5820K EVGA X99 Micro  Sapphire R9 290 Crucial Ballistix Sport (2 x 4GB) 2400  
Hard DriveHard DriveHard DriveOptical Drive
Samsung 840 EVO 120GB SSD Samsung 840 EVO 500GB SSD Western Digital Caviar Black 1TB hahahahhah no. 
CoolingCoolingCoolingCooling
EK Supremacy EVO - Nickel  EK Coolstream PE 360 EK CoolStream PE 240  Noiseblocker NB-Multiframes M12-S2 (x6) 
CoolingCoolingCoolingCooling
Bitspower DDC Top upgrade w/ acrylic top and EK... EK ZMT Tubing  Orgy of EK and Bitspower fittings Mayhems (Rasberry) Purple Pastel 
OSMonitorKeyboardPower
Windows 7 Piece of crap  Das Keyboard 4 Professional MX Blue EVGA SuperNOVA 1000 G2 
CaseMouseMouse PadAudio
CaseLabs S5 (Gunmetal) Zowie EC1 EVO Steelseries QCK AKG 7XX Massdrop Edition 
  hide details  
Reply
Claymore
(24 items)
 
  
CPUMotherboardGraphicsRAM
Intel i7 5820K EVGA X99 Micro  Sapphire R9 290 Crucial Ballistix Sport (2 x 4GB) 2400  
Hard DriveHard DriveHard DriveOptical Drive
Samsung 840 EVO 120GB SSD Samsung 840 EVO 500GB SSD Western Digital Caviar Black 1TB hahahahhah no. 
CoolingCoolingCoolingCooling
EK Supremacy EVO - Nickel  EK Coolstream PE 360 EK CoolStream PE 240  Noiseblocker NB-Multiframes M12-S2 (x6) 
CoolingCoolingCoolingCooling
Bitspower DDC Top upgrade w/ acrylic top and EK... EK ZMT Tubing  Orgy of EK and Bitspower fittings Mayhems (Rasberry) Purple Pastel 
OSMonitorKeyboardPower
Windows 7 Piece of crap  Das Keyboard 4 Professional MX Blue EVGA SuperNOVA 1000 G2 
CaseMouseMouse PadAudio
CaseLabs S5 (Gunmetal) Zowie EC1 EVO Steelseries QCK AKG 7XX Massdrop Edition 
  hide details  
Reply
New Posts  All Forums:Forum Nav:
  Return Home
  Back to Forum: Computer Cases
Overclock.net › Forums › Case Mods & Cases › Computer Cases › [Official] Case Labs Owners Club