Overclock.net › Forums › AMD › AMD - General › BSOD happening again...
New Posts  All Forums:Forum Nav:

BSOD happening again...

post #1 of 6
Thread Starter 
It stopped for a couple weeks. Then started back up again. At this point every piece of hardware has been removed and reinstalled and stress tested for hours with no errors. It happens @ stock or oc. Any voltage or timings. Temps @ 3.5 never exceed 51c at full load,cpu not core temp.Also when it crashes temps are usually in the low 30's. So thats not the issue. Psu reports steady rails @ correct voltages.

Sometimes it will run for 3 or 4 days. Sometimes it bsods a couple times a hour.

Almost always does it while surfing. But it has done it once while gaming.

Here are the errors.

On Thu 2/17/2011 4:05:13 PM GMT your computer crashed
crash dump file: C:\\Windows\\Minidump\\021711-15178-01.dmp
This was probably caused by the following module: hal.dll (hal+0x12903)
Bugcheck code: 0x124 (0x0, 0xFFFFFA8004AF6028, 0xB6004000, 0xD6000135)
Error: WHEA_UNCORRECTABLE_ERROR
file path: C:\\Windows\\system32\\hal.dll
product: Microsoft® Windows® Operating System
company: Microsoft Corporation
description: Hardware Abstraction Layer DLL
Bug check description: This bug check indicates that a fatal hardware error has occurred. This bug check uses the error data that is provided by the Windows Hardware Error Architecture (WHEA).
This is likely to be caused by a hardware problem problem. This problem might be caused by a thermal issue.
The crash took place in a standard Microsoft module. Your system configuration may be incorrect. Possibly this problem is caused by another driver on your system which cannot be identified at this time.


On Thu 2/17/2011 4:05:13 PM GMT your computer crashed
crash dump file: C:\\Windows\\memory.dmp
This was probably caused by the following module: hal.dll (hal!HalBugCheckSystem+0x1E3)
Bugcheck code: 0x124 (0x0, 0xFFFFFA8004AF6028, 0xB6004000, 0xD6000135)
Error: WHEA_UNCORRECTABLE_ERROR
file path: C:\\Windows\\system32\\hal.dll
product: Microsoft® Windows® Operating System
company: Microsoft Corporation
description: Hardware Abstraction Layer DLL
Bug check description: This bug check indicates that a fatal hardware error has occurred. This bug check uses the error data that is provided by the Windows Hardware Error Architecture (WHEA).
This is likely to be caused by a hardware problem problem. This problem might be caused by a thermal issue.
The crash took place in a standard Microsoft module. Your system configuration may be incorrect. Possibly this problem is caused by another driver on your system which cannot be identified at this time.



And this is the whea error in event log.

A fatal hardware error has occurred.

Reported by component: Processor Core
Error Source: Machine Check Exception
Error Type: Cache Hierarchy Error
Processor ID: 5


EventID 18

Version 0

Level 2

Task 0

Opcode 0

Keywords 0x8000000000000000

- TimeCreated

[ SystemTime] 2011-02-14T06:46:58.537734100Z

EventRecordID 8054

- Correlation

[ ActivityID] {A06231C9-6D9C-4443-AA7B-EF1136811314}

- Execution

[ ProcessID] 1908
[ ThreadID] 2540

Channel System

19


- EventData

ErrorSource 3
ApicId 5
MCABank 0
MciStat 0xb6004000a8000135
MciAddr 0x80b51600
MciMisc 0x0
ErrorType 9
TransactionType 1
Participation 256
RequestType 3
MemorIO 256
MemHierarchyLvl 1
Timeout 256
OperationType 256
Channel 256
Length 928


Any ideas anyone may be able to prove would be much appreciated. Short of sending the mobo back im out of things to try.
Edited by MerkSession - 2/17/11 at 8:57am
My System
(13 items)
 
  
CPUMotherboardGraphicsRAM
1055t X6 @ 3.5ghz Asus M4A87TD EVO ASUS GTX 570 900/2000 2x2 G.Skill Rip Jaw DDR3 1600 @ 1667 
Hard DriveOSMonitorPower
WD 200G/WD 320GB 7 x64 Ultimate 47" 1920x1080 lcd Corsair 650w 
  hide details  
Reply
My System
(13 items)
 
  
CPUMotherboardGraphicsRAM
1055t X6 @ 3.5ghz Asus M4A87TD EVO ASUS GTX 570 900/2000 2x2 G.Skill Rip Jaw DDR3 1600 @ 1667 
Hard DriveOSMonitorPower
WD 200G/WD 320GB 7 x64 Ultimate 47" 1920x1080 lcd Corsair 650w 
  hide details  
Reply
post #2 of 6
Have you been updating all of your drivers and bios? also windows updates? i was getting random bsod and i just updated and fix it
Edited by supercole - 2/17/11 at 8:58am
Dethkomputer
(13 items)
 
  
CPUMotherboardGraphicsRAM
Phenom II X4 945 Deneb 3.0GHz 95W BIOSTAR TA990FXE AM3+ AMD 990FX SATA 6Gb/s USB ... 2x GTX 550 TI's in SLI CORSAIR Vengeance 8GB (2 x 4GB) 240-Pin DDR3 SD... 
Hard DriveOptical DriveOSMonitor
Western Digital 750G Black Sony Lightscribe Windows 7 Ultimate 64bit  Acer 23in 
KeyboardPowerCaseMouse
Razar BlackWidow Mechanical CORSAIR CMPSU-650TX 650W Corsair Carbide Series 400R Graphite grey and b... Razer DeathAdder 
Mouse Pad
Razer 
  hide details  
Reply
Dethkomputer
(13 items)
 
  
CPUMotherboardGraphicsRAM
Phenom II X4 945 Deneb 3.0GHz 95W BIOSTAR TA990FXE AM3+ AMD 990FX SATA 6Gb/s USB ... 2x GTX 550 TI's in SLI CORSAIR Vengeance 8GB (2 x 4GB) 240-Pin DDR3 SD... 
Hard DriveOptical DriveOSMonitor
Western Digital 750G Black Sony Lightscribe Windows 7 Ultimate 64bit  Acer 23in 
KeyboardPowerCaseMouse
Razar BlackWidow Mechanical CORSAIR CMPSU-650TX 650W Corsair Carbide Series 400R Graphite grey and b... Razer DeathAdder 
Mouse Pad
Razer 
  hide details  
Reply
post #3 of 6
Thread Starter 
Ya ive tried every bios asus has listed on there website. I cant use a new nvidia driver for the gtx 570. nvidia royally screwed over scan thru hdmi on them. But ive updated all the others. And it was working fine for the first 2 mo or so after i assembled it with these drivers. Then suddenly started the random bsod's.


I even backed up all my crap and reinstalled the os...
My System
(13 items)
 
  
CPUMotherboardGraphicsRAM
1055t X6 @ 3.5ghz Asus M4A87TD EVO ASUS GTX 570 900/2000 2x2 G.Skill Rip Jaw DDR3 1600 @ 1667 
Hard DriveOSMonitorPower
WD 200G/WD 320GB 7 x64 Ultimate 47" 1920x1080 lcd Corsair 650w 
  hide details  
Reply
My System
(13 items)
 
  
CPUMotherboardGraphicsRAM
1055t X6 @ 3.5ghz Asus M4A87TD EVO ASUS GTX 570 900/2000 2x2 G.Skill Rip Jaw DDR3 1600 @ 1667 
Hard DriveOSMonitorPower
WD 200G/WD 320GB 7 x64 Ultimate 47" 1920x1080 lcd Corsair 650w 
  hide details  
Reply
post #4 of 6
You should try updating the nvidia driver those can cause problems if you get behind, everyone is always updating everything for newer drivers so you need to keep up. Did you just start getting them? Possible virus? Maybe?
Dethkomputer
(13 items)
 
  
CPUMotherboardGraphicsRAM
Phenom II X4 945 Deneb 3.0GHz 95W BIOSTAR TA990FXE AM3+ AMD 990FX SATA 6Gb/s USB ... 2x GTX 550 TI's in SLI CORSAIR Vengeance 8GB (2 x 4GB) 240-Pin DDR3 SD... 
Hard DriveOptical DriveOSMonitor
Western Digital 750G Black Sony Lightscribe Windows 7 Ultimate 64bit  Acer 23in 
KeyboardPowerCaseMouse
Razar BlackWidow Mechanical CORSAIR CMPSU-650TX 650W Corsair Carbide Series 400R Graphite grey and b... Razer DeathAdder 
Mouse Pad
Razer 
  hide details  
Reply
Dethkomputer
(13 items)
 
  
CPUMotherboardGraphicsRAM
Phenom II X4 945 Deneb 3.0GHz 95W BIOSTAR TA990FXE AM3+ AMD 990FX SATA 6Gb/s USB ... 2x GTX 550 TI's in SLI CORSAIR Vengeance 8GB (2 x 4GB) 240-Pin DDR3 SD... 
Hard DriveOptical DriveOSMonitor
Western Digital 750G Black Sony Lightscribe Windows 7 Ultimate 64bit  Acer 23in 
KeyboardPowerCaseMouse
Razar BlackWidow Mechanical CORSAIR CMPSU-650TX 650W Corsair Carbide Series 400R Graphite grey and b... Razer DeathAdder 
Mouse Pad
Razer 
  hide details  
Reply
post #5 of 6
Dethkomputer
(13 items)
 
  
CPUMotherboardGraphicsRAM
Phenom II X4 945 Deneb 3.0GHz 95W BIOSTAR TA990FXE AM3+ AMD 990FX SATA 6Gb/s USB ... 2x GTX 550 TI's in SLI CORSAIR Vengeance 8GB (2 x 4GB) 240-Pin DDR3 SD... 
Hard DriveOptical DriveOSMonitor
Western Digital 750G Black Sony Lightscribe Windows 7 Ultimate 64bit  Acer 23in 
KeyboardPowerCaseMouse
Razar BlackWidow Mechanical CORSAIR CMPSU-650TX 650W Corsair Carbide Series 400R Graphite grey and b... Razer DeathAdder 
Mouse Pad
Razer 
  hide details  
Reply
Dethkomputer
(13 items)
 
  
CPUMotherboardGraphicsRAM
Phenom II X4 945 Deneb 3.0GHz 95W BIOSTAR TA990FXE AM3+ AMD 990FX SATA 6Gb/s USB ... 2x GTX 550 TI's in SLI CORSAIR Vengeance 8GB (2 x 4GB) 240-Pin DDR3 SD... 
Hard DriveOptical DriveOSMonitor
Western Digital 750G Black Sony Lightscribe Windows 7 Ultimate 64bit  Acer 23in 
KeyboardPowerCaseMouse
Razar BlackWidow Mechanical CORSAIR CMPSU-650TX 650W Corsair Carbide Series 400R Graphite grey and b... Razer DeathAdder 
Mouse Pad
Razer 
  hide details  
Reply
post #6 of 6
Thread Starter 
They are 2 series back. On the new drivers. Overscan keeps about 20% of the screen from being visable on my monitor. The drivers from 2 release back to have that issue.

If i update then i cant run at native resolution.

Maybe ill throw in a ati gpu as those dont have any hdmi issues and see if it happens.

The error isnt pointing to a driver. But it is hardware...so maybe .i wish the 0x124 error wasnt such a pain.
My System
(13 items)
 
  
CPUMotherboardGraphicsRAM
1055t X6 @ 3.5ghz Asus M4A87TD EVO ASUS GTX 570 900/2000 2x2 G.Skill Rip Jaw DDR3 1600 @ 1667 
Hard DriveOSMonitorPower
WD 200G/WD 320GB 7 x64 Ultimate 47" 1920x1080 lcd Corsair 650w 
  hide details  
Reply
My System
(13 items)
 
  
CPUMotherboardGraphicsRAM
1055t X6 @ 3.5ghz Asus M4A87TD EVO ASUS GTX 570 900/2000 2x2 G.Skill Rip Jaw DDR3 1600 @ 1667 
Hard DriveOSMonitorPower
WD 200G/WD 320GB 7 x64 Ultimate 47" 1920x1080 lcd Corsair 650w 
  hide details  
Reply
New Posts  All Forums:Forum Nav:
  Return Home
  Back to Forum: AMD - General
Overclock.net › Forums › AMD › AMD - General › BSOD happening again...