Overclock.net › Forums › Intel › Intel Motherboards › P5KC Overclock Settings Help Please
New Posts  All Forums:Forum Nav:

P5KC Overclock Settings Help Please - Page 2

post #11 of 17
Thread Starter 
Settings seem to be working now as long as I don't go to high with the FSB which I wasn't planning to do anyway. I tried 400 just to see but that failed with IBT. So I dropped down to 375 which was about all I really thought & planned to try to do which worked fine.

The only problem of course is the temps but for what the computer is being used for I don't foresee that as being an issue. It's not used for gaming only very heavy internet browsing with many Firefox windows being opened at a time. Websites that include Flash Players & Plug-In Containers, etc...

Plus I was able to increase the memory a little too.

Thanks again KingT.

I'm going to also be trying to do the same thing on a P5KE motherboard soon. Do you think the same settings will work on it? I can't remember what CPU or Memory is in it but it should be close to the same on the ratings & specs. I built them all.

The P5KC is my old board & the P5KE I had before that
ASUS boards do last!

P5KC 3.0 Validation
Edited by Taz_Man - 2/18/11 at 6:02pm
Taz Manian Devil
(17 items)
 
  
CPUMotherboardGraphicsRAM
Intel Quad Core Q9650 Asus P5Q Deluxe EVGA GeForce GTX 465 SC OCZ Platinum - PC8500 - OCZ2P10662G 
Hard DriveHard DriveHard DriveOptical Drive
Western Digital WD1002FAEX Seagate ST31000528AS Maxtor STM3750330AS LG WH12LS30 
Optical DriveCoolingOSMonitor
Lite-On LH-20A1L Coller Master Hyper 212 Plus Windows XP Home 32 Bit Samsung B2230HD 22" 
KeyboardPowerCaseMouse
Microsoft 6000 v2 Cosair HX-750W Antec 1200 Red Logitec G600 
Mouse Pad
Razer Manticor 
  hide details  
Reply
Taz Manian Devil
(17 items)
 
  
CPUMotherboardGraphicsRAM
Intel Quad Core Q9650 Asus P5Q Deluxe EVGA GeForce GTX 465 SC OCZ Platinum - PC8500 - OCZ2P10662G 
Hard DriveHard DriveHard DriveOptical Drive
Western Digital WD1002FAEX Seagate ST31000528AS Maxtor STM3750330AS LG WH12LS30 
Optical DriveCoolingOSMonitor
Lite-On LH-20A1L Coller Master Hyper 212 Plus Windows XP Home 32 Bit Samsung B2230HD 22" 
KeyboardPowerCaseMouse
Microsoft 6000 v2 Cosair HX-750W Antec 1200 Red Logitec G600 
Mouse Pad
Razer Manticor 
  hide details  
Reply
post #12 of 17
Thread Starter 
KingT I take it these settings still work with a P5K & a Q9450 2.66 MHz CPU?

The other motherboard turned out to be a P5K not a P5KE as I thought.

The Memory is 2MB DDR2 PC2-8500 Crucial BL12864AA106A.8FE5.
Taz Manian Devil
(17 items)
 
  
CPUMotherboardGraphicsRAM
Intel Quad Core Q9650 Asus P5Q Deluxe EVGA GeForce GTX 465 SC OCZ Platinum - PC8500 - OCZ2P10662G 
Hard DriveHard DriveHard DriveOptical Drive
Western Digital WD1002FAEX Seagate ST31000528AS Maxtor STM3750330AS LG WH12LS30 
Optical DriveCoolingOSMonitor
Lite-On LH-20A1L Coller Master Hyper 212 Plus Windows XP Home 32 Bit Samsung B2230HD 22" 
KeyboardPowerCaseMouse
Microsoft 6000 v2 Cosair HX-750W Antec 1200 Red Logitec G600 
Mouse Pad
Razer Manticor 
  hide details  
Reply
Taz Manian Devil
(17 items)
 
  
CPUMotherboardGraphicsRAM
Intel Quad Core Q9650 Asus P5Q Deluxe EVGA GeForce GTX 465 SC OCZ Platinum - PC8500 - OCZ2P10662G 
Hard DriveHard DriveHard DriveOptical Drive
Western Digital WD1002FAEX Seagate ST31000528AS Maxtor STM3750330AS LG WH12LS30 
Optical DriveCoolingOSMonitor
Lite-On LH-20A1L Coller Master Hyper 212 Plus Windows XP Home 32 Bit Samsung B2230HD 22" 
KeyboardPowerCaseMouse
Microsoft 6000 v2 Cosair HX-750W Antec 1200 Red Logitec G600 
Mouse Pad
Razer Manticor 
  hide details  
Reply
post #13 of 17
Thread Starter 
Well I guess they won't work the same because I've tried them & they aren't working.

I've tried to increase the CPU voltage but that just made it worse.

I did notice this CPU seems to need a lot more voltage. It appeared to need 1.26v just for 3.0 MHz.
Taz Manian Devil
(17 items)
 
  
CPUMotherboardGraphicsRAM
Intel Quad Core Q9650 Asus P5Q Deluxe EVGA GeForce GTX 465 SC OCZ Platinum - PC8500 - OCZ2P10662G 
Hard DriveHard DriveHard DriveOptical Drive
Western Digital WD1002FAEX Seagate ST31000528AS Maxtor STM3750330AS LG WH12LS30 
Optical DriveCoolingOSMonitor
Lite-On LH-20A1L Coller Master Hyper 212 Plus Windows XP Home 32 Bit Samsung B2230HD 22" 
KeyboardPowerCaseMouse
Microsoft 6000 v2 Cosair HX-750W Antec 1200 Red Logitec G600 
Mouse Pad
Razer Manticor 
  hide details  
Reply
Taz Manian Devil
(17 items)
 
  
CPUMotherboardGraphicsRAM
Intel Quad Core Q9650 Asus P5Q Deluxe EVGA GeForce GTX 465 SC OCZ Platinum - PC8500 - OCZ2P10662G 
Hard DriveHard DriveHard DriveOptical Drive
Western Digital WD1002FAEX Seagate ST31000528AS Maxtor STM3750330AS LG WH12LS30 
Optical DriveCoolingOSMonitor
Lite-On LH-20A1L Coller Master Hyper 212 Plus Windows XP Home 32 Bit Samsung B2230HD 22" 
KeyboardPowerCaseMouse
Microsoft 6000 v2 Cosair HX-750W Antec 1200 Red Logitec G600 
Mouse Pad
Razer Manticor 
  hide details  
Reply
post #14 of 17
Quote:
Originally Posted by Taz_Man View Post
I was wondering if anyone had any ideas on what might be good to use to Overclock a P5KC board with a Q9400 2.66 GHz CPU? Stock Cooling.

The Memory is 2MB DDR3 PC3-8500 Corsair CM3X1024-1333C9.

Thanx
Well, I'm using a Q9400@3.6GHz, (1.25 Volts under IBT Load) in my Gigabyte GA-P35 DS3R mobo, Rock stable.

Your P5KC is also a P35 mobo. You should also be able to do 450FSB and should not be hard for that CPU to reach 3.6GHz.

You probably need to raise the Nortbridge Voltage a couple of notches and also FSB Volts. And do not Leave the Performance Level at Auto. 8 -10 should be fine.

Edit: Arrrgghh... I'm sure I could have made it to 4GHz easy with this Q9400 with a Gigabyte UD3P or something... It runs very cool too.. Well, well...
Edited by turrican9 - 2/24/11 at 2:52pm
    
CPUMotherboardGraphicsRAM
Core i7 2600K@4.5GHz Asus P8P67 Pro 3.0 (B3) EVGA GTX 1070 SC Black Edition 4x4GB Corsair Vengeance 1600-9-9-9-24-2t-1.5v 
Hard DriveOptical DriveOSMonitor
M500 240GB SSD for OS, 2x256GB M4's Raid0 for ... Generic Windows 10 Pro 64 Bit Asus VK266H 
PowerCase
Corsair RM 750x Cooler Master Storm Scout 
  hide details  
Reply
    
CPUMotherboardGraphicsRAM
Core i7 2600K@4.5GHz Asus P8P67 Pro 3.0 (B3) EVGA GTX 1070 SC Black Edition 4x4GB Corsair Vengeance 1600-9-9-9-24-2t-1.5v 
Hard DriveOptical DriveOSMonitor
M500 240GB SSD for OS, 2x256GB M4's Raid0 for ... Generic Windows 10 Pro 64 Bit Asus VK266H 
PowerCase
Corsair RM 750x Cooler Master Storm Scout 
  hide details  
Reply
post #15 of 17
P5K mobos have a huge Vdrop and Vdroop so you need to compensate with higher Vcore in the BIOS..

For example if you need to have 1.25V for some OC in the OS and under stress test load to be stable then you'll need to set higher Vcore in the BIOS like 1.32V..

I don't see why those settings shouldn't work on P5K as they both are the same boards except for type of RAM (DDR2 vs DDR3)..

CHEERS..
     
CPUMotherboardGraphicsRAM
E6750 G0 @ 3.3GHz (1.25V LOAD) Asus P5KPL-VM G31 GeForce 8500GT @ 700/1600/445 Apacer 2x1GB 800MHz 
Hard DriveOptical DriveOSMonitor
Hitachi Deskstar 160GB (7200,8MB) LG DVD Win 7 Ultimate 64bit build 7601 LG 19" 
KeyboardPowerCaseMouse
5$ keyboard Cheap stuff Linkworld crappy/modded SmartBox cheap 
Mouse Pad
N/A 
  hide details  
Reply
     
CPUMotherboardGraphicsRAM
E6750 G0 @ 3.3GHz (1.25V LOAD) Asus P5KPL-VM G31 GeForce 8500GT @ 700/1600/445 Apacer 2x1GB 800MHz 
Hard DriveOptical DriveOSMonitor
Hitachi Deskstar 160GB (7200,8MB) LG DVD Win 7 Ultimate 64bit build 7601 LG 19" 
KeyboardPowerCaseMouse
5$ keyboard Cheap stuff Linkworld crappy/modded SmartBox cheap 
Mouse Pad
N/A 
  hide details  
Reply
post #16 of 17
Quote:
Originally Posted by KingT View Post
P5K mobos have a huge Vdrop and Vdroop so you need to compensate with higher Vcore in the BIOS..

For example if you need to have 1.25V for some OC in the OS and under stress test load to be stable then you'll need to set higher Vcore in the BIOS like 1.32V..

I don't see why those settings shouldn't work on P5K as they both are the same boards except for type of RAM (DDR2 vs DDR3)..

CHEERS..
In my Gigabyte board I set Vcore to 1.35 volts in bios and drops to 1.25v under IBT. I have no LLC in this board. This is a pretty standard Vdroop... As long as people know about it, and can compensate..
    
CPUMotherboardGraphicsRAM
Core i7 2600K@4.5GHz Asus P8P67 Pro 3.0 (B3) EVGA GTX 1070 SC Black Edition 4x4GB Corsair Vengeance 1600-9-9-9-24-2t-1.5v 
Hard DriveOptical DriveOSMonitor
M500 240GB SSD for OS, 2x256GB M4's Raid0 for ... Generic Windows 10 Pro 64 Bit Asus VK266H 
PowerCase
Corsair RM 750x Cooler Master Storm Scout 
  hide details  
Reply
    
CPUMotherboardGraphicsRAM
Core i7 2600K@4.5GHz Asus P8P67 Pro 3.0 (B3) EVGA GTX 1070 SC Black Edition 4x4GB Corsair Vengeance 1600-9-9-9-24-2t-1.5v 
Hard DriveOptical DriveOSMonitor
M500 240GB SSD for OS, 2x256GB M4's Raid0 for ... Generic Windows 10 Pro 64 Bit Asus VK266H 
PowerCase
Corsair RM 750x Cooler Master Storm Scout 
  hide details  
Reply
post #17 of 17
Taz_Man

Also make sure you set the Command Rate to 2T instead of Auto. You do not want it to default to 1T.
    
CPUMotherboardGraphicsRAM
Core i7 2600K@4.5GHz Asus P8P67 Pro 3.0 (B3) EVGA GTX 1070 SC Black Edition 4x4GB Corsair Vengeance 1600-9-9-9-24-2t-1.5v 
Hard DriveOptical DriveOSMonitor
M500 240GB SSD for OS, 2x256GB M4's Raid0 for ... Generic Windows 10 Pro 64 Bit Asus VK266H 
PowerCase
Corsair RM 750x Cooler Master Storm Scout 
  hide details  
Reply
    
CPUMotherboardGraphicsRAM
Core i7 2600K@4.5GHz Asus P8P67 Pro 3.0 (B3) EVGA GTX 1070 SC Black Edition 4x4GB Corsair Vengeance 1600-9-9-9-24-2t-1.5v 
Hard DriveOptical DriveOSMonitor
M500 240GB SSD for OS, 2x256GB M4's Raid0 for ... Generic Windows 10 Pro 64 Bit Asus VK266H 
PowerCase
Corsair RM 750x Cooler Master Storm Scout 
  hide details  
Reply
New Posts  All Forums:Forum Nav:
  Return Home
  Back to Forum: Intel Motherboards
Overclock.net › Forums › Intel › Intel Motherboards › P5KC Overclock Settings Help Please