Overclock.net › Forums › AMD › AMD CPUs › First time at 4.1 Stable
New Posts  All Forums:Forum Nav:

First time at 4.1 Stable

post #1 of 4
Thread Starter 
Hey guys,

My first time at 4.1GHz stable, 2800NB.


Before stop



After stop

Is this voltage going to damage my cpu if I run it 24/7? My CPU is at 1.4040v and my NB is at 1.2v. Thanks everyone!
Edited by sbdblyss - 2/22/11 at 9:24am
post #2 of 4
congrats

and no, both your voltages are GREAT, you should only start to worry if you go above 1.5v on the cpu and and 1.4v on the NB. you still have plenty of OC headroom with those voltages.
post #3 of 4
Your pics are dead in the first post...What did you use to test stability, and what were your temps?
    
CPUMotherboardGraphicsRAM
FX 8120 ASUS M4A89GTD PRO/USB3 890GX 2 x Asus 5770 CuCore 2 x 2GB Kingston HyperX 1800Mhz 
Hard DriveCoolingOSMonitor
64 GB Kingston V-Series Err, 10 Gallons of Mineral Oil and a Automotive... Windows 7 x64 SP1 24" Asus LCD 
KeyboardPowerCaseMouse
Razer BlackWidow Ultimate 600W Seasonic Aquarium with ~10 gallons of mineral oil Razer DeathAdder 
Mouse Pad
Razer Kabuto 
  hide details  
Reply
    
CPUMotherboardGraphicsRAM
FX 8120 ASUS M4A89GTD PRO/USB3 890GX 2 x Asus 5770 CuCore 2 x 2GB Kingston HyperX 1800Mhz 
Hard DriveCoolingOSMonitor
64 GB Kingston V-Series Err, 10 Gallons of Mineral Oil and a Automotive... Windows 7 x64 SP1 24" Asus LCD 
KeyboardPowerCaseMouse
Razer BlackWidow Ultimate 600W Seasonic Aquarium with ~10 gallons of mineral oil Razer DeathAdder 
Mouse Pad
Razer Kabuto 
  hide details  
Reply
post #4 of 4
Thread Starter 
I just fixed the images and they have all of the temp information. I used Prime95 blend for about 15 hours. I was not stable at 1.39v, but 1.404v seems to have worked.
New Posts  All Forums:Forum Nav:
  Return Home
  Back to Forum: AMD CPUs
Overclock.net › Forums › AMD › AMD CPUs › First time at 4.1 Stable