Overclock.net › Forums › Cooling › Air Cooling › Do I have to take out motherboard?
New Posts  All Forums:Forum Nav:

Do I have to take out motherboard?

post #1 of 6
Thread Starter 
To install a CM 212+ on an AM3 board?

& how do you remove the stock AMD heatsink? It's stuck!!!!!!!!!!!!!!!!!!!!!! Stupid thermal pad.
post #2 of 6
use an index card to lift it off or a folded piece of paper?
post #3 of 6
You will need to pull the mobo out of the case if you do not have the access hole in the back.
and to get the stocker off it might help if your computer was warmed up, run a few minutes of prime95 then shutdown and try to immediately pull it off?
Edited by Blackout51 - 2/23/11 at 2:41pm
    
CPUMotherboardGraphicsRAM
Q9300 @ 3.2 (1.29v load) ASUS P5N-D 750i Asus DirectCU GTX 460 8GB DDR2 GSkill 1066 
Hard DriveOptical DriveCoolingOS
150GB WD Raptor OS, 500GB, 640GB x2 Samsung SATA DVD RW Coolermaster Hyper 212 plus Win 7 Pro x64 
MonitorPowerCase
Dual 1280x1024's OCZ 600W Silverstone TJ07 w/ a few mods 
  hide details  
Reply
    
CPUMotherboardGraphicsRAM
Q9300 @ 3.2 (1.29v load) ASUS P5N-D 750i Asus DirectCU GTX 460 8GB DDR2 GSkill 1066 
Hard DriveOptical DriveCoolingOS
150GB WD Raptor OS, 500GB, 640GB x2 Samsung SATA DVD RW Coolermaster Hyper 212 plus Win 7 Pro x64 
MonitorPowerCase
Dual 1280x1024's OCZ 600W Silverstone TJ07 w/ a few mods 
  hide details  
Reply
post #4 of 6
are you talking about the actual heatsink? I pulled mine too hard and the CPU came out with it I hat to prise the CPU off with a flat screwdriver lol. twist the heat sink and it will hopefully pop off, just don't pull it good luck
:3
(10 items)
 
   
CPUMotherboardGraphicsRAM
2600k Asus P8Z77-I Deluxe GTX 680 2GB 16GB Corsair vengeance  
Hard DriveOSMonitorPower
2x 250GB HyperX Windows 7 SP1 x64 Benq G2420HD XFX 650W 
CaseAudio
lian li pc-q08b On-board 
CPUMotherboardGraphicsRAM
phenom II X4 955 C3 @ 4.2ghz 1.4v ASUS M4A79T Deluxe Radeon HD 5870 crossfire 940/1300 8GB corsair ddr3 1600mhz 7-8-7-20@1.75v 
Hard DriveCoolingCoolingOS
120GB Kingston HyperX SSD, 250gb HDD x3 +660Gb 5870 Accelero Xtreme Corsair H100  win 7 ultimate 64bit (stipped to bone) 
MonitorPowerCase
Benq G2420HD XFX Pro 650W (sleeved) (seasonic in disguise) Bitfenix Colossus 
  hide details  
Reply
:3
(10 items)
 
   
CPUMotherboardGraphicsRAM
2600k Asus P8Z77-I Deluxe GTX 680 2GB 16GB Corsair vengeance  
Hard DriveOSMonitorPower
2x 250GB HyperX Windows 7 SP1 x64 Benq G2420HD XFX 650W 
CaseAudio
lian li pc-q08b On-board 
CPUMotherboardGraphicsRAM
phenom II X4 955 C3 @ 4.2ghz 1.4v ASUS M4A79T Deluxe Radeon HD 5870 crossfire 940/1300 8GB corsair ddr3 1600mhz 7-8-7-20@1.75v 
Hard DriveCoolingCoolingOS
120GB Kingston HyperX SSD, 250gb HDD x3 +660Gb 5870 Accelero Xtreme Corsair H100  win 7 ultimate 64bit (stipped to bone) 
MonitorPowerCase
Benq G2420HD XFX Pro 650W (sleeved) (seasonic in disguise) Bitfenix Colossus 
  hide details  
Reply
post #5 of 6
Thread Starter 
OK I got the stock heatsink off (thank god) but now I'm pretty confused with all the bolts and stuff...
post #6 of 6
there are 4 ph2 screws holding the plastic bracket to the motherboard
then the back plate should come off too
New Posts  All Forums:Forum Nav:
  Return Home
  Back to Forum: Air Cooling
Overclock.net › Forums › Cooling › Air Cooling › Do I have to take out motherboard?