mcp 355 or 655. It depends how many blocks you are going to have in the loop. I'd say under 3 blocks the 655 is the better choice and over 3 the 355 with a xspc pumptop would work best. Both are great tho and will be recommended highly by most anyone on ocn. I have gone through my share of 355s as well (2) but that's due to user error (not securing a top properly and mounting one with a sticky pad). I'm running two in a series my rig right now on my gpu loop and both work wonderfully. The mcp 355 does get hot and if not mounted properly will kill itself with heat. as stated by the above post.
Originally Posted by Vbp6us
I can tell you what to steer clear of. Don't get the MCP355. I've gone through three and I just can't recommend them anymore. And that's using water only and elevating them so they have air flowing under them. Imo, bad products. I'm going to go with a cheap aquarium pump with high head. Gl on your setup.
ur doing it wrong
j/k that sucks... seems like you mounted it poorlyEdited by fat_italian_stallion - 3/2/11 at 9:14pm