Overclock.net › Forums › General Hardware › General Processor Discussions › new rig not coming on ? (help)
New Posts  All Forums:Forum Nav:

new rig not coming on ? (help)

post #1 of 5
Thread Starter 
just finish building my new rig

my water cooling is done

its working perfectly
I had some problems at the start because I forgot to put a o ring between the res and the pump but I fixed it all and everything works fine.
I tested the loop with anther computer for 2 hours of bleeding baubles and 3 hours of leak testing.

I put my video cards in the PCI-E slot at the top and the one below it

connected the PSU to the mother board and the PSU to the 8pin for the CPU

connected in all my 4X2 mushkin redline ram
connected the cards with 2X8 and 2X6

connected my pump, and all my fans to the fan controller and the fun controller to the psu

I dont have anything else connected right now


I didnt use the cable that came with the 1200AX because it dont feet the outlet of my country.
I just used a cable that came with anther PSU I have, a 500W TT tough power series. (that cable is much thinner the the 1200AX cable).


the problem is when I push the start bottom on the mother board everything start all the fans spins the graphic cards start as well

after like 15-20 sec everything shut down
and without me toughing anything the power come back up and then again after 15-20 sec it shut down... (and it will keep going I guess, even thought I didnt let it keep doing it and just turned it off)

what should I do and what did I do wrong can anyone help ???


and is it dangerous to let it keep shutting down and turning on...


edit:
if it the wrong place to ask then sorry I have no idea where.
so if its the wrong place then sorry I will open where I should...
Edited by ranerX3 - 3/4/11 at 1:30am
My build :)
(15 items)
 
little sis
(12 items)
 
 
CPUMotherboardGraphicsRAM
I7 2600K @ 4.9 1.41v Z77 Gigabyte G1.Sniper 3 (Gigabyte P67 UD7 old) Gigabyte GTX580 SLI 2x4GB HyperX Fury  
Hard DriveHard DriveCoolingMonitor
crucial mx100 256GB 3x1TB WD black rasa block + 2xGTX360 rad's + 2EK waterblocks DELL P2414H 
PowerCaseMouseAudio
corsair 1200AX HAF stacker G400,Performance MX, Roccat Kone XTD beyerdynamic DT 770M 
CPUMotherboardGraphicsRAM
intel core i7 920 gigabyte x58 extreme integrated water cooling nvidia gtx285 2GB 3x2GB Kingston 1333mhz 
Hard DriveCoolingOSMonitor
2x1TB WD black XSPC 360AX win7 ultimate DELL U2311H 
PowerCaseMouseAudio
corsair AX1200 HAF-X logitech G400 audio technica ath-m50 
  hide details  
Reply
My build :)
(15 items)
 
little sis
(12 items)
 
 
CPUMotherboardGraphicsRAM
I7 2600K @ 4.9 1.41v Z77 Gigabyte G1.Sniper 3 (Gigabyte P67 UD7 old) Gigabyte GTX580 SLI 2x4GB HyperX Fury  
Hard DriveHard DriveCoolingMonitor
crucial mx100 256GB 3x1TB WD black rasa block + 2xGTX360 rad's + 2EK waterblocks DELL P2414H 
PowerCaseMouseAudio
corsair 1200AX HAF stacker G400,Performance MX, Roccat Kone XTD beyerdynamic DT 770M 
CPUMotherboardGraphicsRAM
intel core i7 920 gigabyte x58 extreme integrated water cooling nvidia gtx285 2GB 3x2GB Kingston 1333mhz 
Hard DriveCoolingOSMonitor
2x1TB WD black XSPC 360AX win7 ultimate DELL U2311H 
PowerCaseMouseAudio
corsair AX1200 HAF-X logitech G400 audio technica ath-m50 
  hide details  
Reply
post #2 of 5
When you realized you forgot an O-ring, did any water leak out and possibly get on any components? If not, it's time to strip it down to bare bones (take out both video cards, take out all but one stick of ram, take out all but one hard drive and power it up). If bare bones boots and gives you beep codes (or POST codes) and stays on for about 90-120 seconds, I'd say you can power down, and plug in ONE video card and power it back up.

After that, start checking all your RAM sticks, one at a time. After that, and when everything else is verified as working well, THEN go back and try SLI.
Big Baby
(13 items)
 
  
CPUMotherboardGraphicsRAM
Core 2 Duo E8400 Wolfdale 3.0 Ghz Asrock P45R2000 WiFi 460 GTX 6GB Patriot Viper DDR3 1333 (2x1GB and 2x2GB) 
Hard DriveOptical DriveOSMonitor
Kingston 64GB SSD, 1TB Hitachi and 3 160GB drives ASUS dual layer SATA II DVD burner Windows 7 Pro 64 Bit and a few virtual machines ;) Hanns.G Hi221D 22" LCD Widescreen 
KeyboardPowerCaseMouse
standard junker nothin' fancy. Yet... HIPER 730 W Rosewill Conqueror Logitech Trackball (TrackMan is the model I think) 
Mouse Pad
The Desk! 
  hide details  
Reply
Big Baby
(13 items)
 
  
CPUMotherboardGraphicsRAM
Core 2 Duo E8400 Wolfdale 3.0 Ghz Asrock P45R2000 WiFi 460 GTX 6GB Patriot Viper DDR3 1333 (2x1GB and 2x2GB) 
Hard DriveOptical DriveOSMonitor
Kingston 64GB SSD, 1TB Hitachi and 3 160GB drives ASUS dual layer SATA II DVD burner Windows 7 Pro 64 Bit and a few virtual machines ;) Hanns.G Hi221D 22" LCD Widescreen 
KeyboardPowerCaseMouse
standard junker nothin' fancy. Yet... HIPER 730 W Rosewill Conqueror Logitech Trackball (TrackMan is the model I think) 
Mouse Pad
The Desk! 
  hide details  
Reply
post #3 of 5
your PC is not coming onto who?

ohh you mean turning on?

That's what happened to my PC - I left it for an hour or two and it worked perfectly after that - sometimes the PSU might need to warm up
post #4 of 5
Thread Starter 
^ I dont think its need to warm up...


no non of the water got to any of my components only for the dan controller and its is perfectly fine


I realy cant see way is it happening

I took on of the video cards and tried and it did the same

but didnt try to do it with 1 ram stick yet
My build :)
(15 items)
 
little sis
(12 items)
 
 
CPUMotherboardGraphicsRAM
I7 2600K @ 4.9 1.41v Z77 Gigabyte G1.Sniper 3 (Gigabyte P67 UD7 old) Gigabyte GTX580 SLI 2x4GB HyperX Fury  
Hard DriveHard DriveCoolingMonitor
crucial mx100 256GB 3x1TB WD black rasa block + 2xGTX360 rad's + 2EK waterblocks DELL P2414H 
PowerCaseMouseAudio
corsair 1200AX HAF stacker G400,Performance MX, Roccat Kone XTD beyerdynamic DT 770M 
CPUMotherboardGraphicsRAM
intel core i7 920 gigabyte x58 extreme integrated water cooling nvidia gtx285 2GB 3x2GB Kingston 1333mhz 
Hard DriveCoolingOSMonitor
2x1TB WD black XSPC 360AX win7 ultimate DELL U2311H 
PowerCaseMouseAudio
corsair AX1200 HAF-X logitech G400 audio technica ath-m50 
  hide details  
Reply
My build :)
(15 items)
 
little sis
(12 items)
 
 
CPUMotherboardGraphicsRAM
I7 2600K @ 4.9 1.41v Z77 Gigabyte G1.Sniper 3 (Gigabyte P67 UD7 old) Gigabyte GTX580 SLI 2x4GB HyperX Fury  
Hard DriveHard DriveCoolingMonitor
crucial mx100 256GB 3x1TB WD black rasa block + 2xGTX360 rad's + 2EK waterblocks DELL P2414H 
PowerCaseMouseAudio
corsair 1200AX HAF stacker G400,Performance MX, Roccat Kone XTD beyerdynamic DT 770M 
CPUMotherboardGraphicsRAM
intel core i7 920 gigabyte x58 extreme integrated water cooling nvidia gtx285 2GB 3x2GB Kingston 1333mhz 
Hard DriveCoolingOSMonitor
2x1TB WD black XSPC 360AX win7 ultimate DELL U2311H 
PowerCaseMouseAudio
corsair AX1200 HAF-X logitech G400 audio technica ath-m50 
  hide details  
Reply
post #5 of 5
Thread Starter 
3 of my ram was connected and one wasnt connected as tight so the system didnt come on

now everything works fine
My build :)
(15 items)
 
little sis
(12 items)
 
 
CPUMotherboardGraphicsRAM
I7 2600K @ 4.9 1.41v Z77 Gigabyte G1.Sniper 3 (Gigabyte P67 UD7 old) Gigabyte GTX580 SLI 2x4GB HyperX Fury  
Hard DriveHard DriveCoolingMonitor
crucial mx100 256GB 3x1TB WD black rasa block + 2xGTX360 rad's + 2EK waterblocks DELL P2414H 
PowerCaseMouseAudio
corsair 1200AX HAF stacker G400,Performance MX, Roccat Kone XTD beyerdynamic DT 770M 
CPUMotherboardGraphicsRAM
intel core i7 920 gigabyte x58 extreme integrated water cooling nvidia gtx285 2GB 3x2GB Kingston 1333mhz 
Hard DriveCoolingOSMonitor
2x1TB WD black XSPC 360AX win7 ultimate DELL U2311H 
PowerCaseMouseAudio
corsair AX1200 HAF-X logitech G400 audio technica ath-m50 
  hide details  
Reply
My build :)
(15 items)
 
little sis
(12 items)
 
 
CPUMotherboardGraphicsRAM
I7 2600K @ 4.9 1.41v Z77 Gigabyte G1.Sniper 3 (Gigabyte P67 UD7 old) Gigabyte GTX580 SLI 2x4GB HyperX Fury  
Hard DriveHard DriveCoolingMonitor
crucial mx100 256GB 3x1TB WD black rasa block + 2xGTX360 rad's + 2EK waterblocks DELL P2414H 
PowerCaseMouseAudio
corsair 1200AX HAF stacker G400,Performance MX, Roccat Kone XTD beyerdynamic DT 770M 
CPUMotherboardGraphicsRAM
intel core i7 920 gigabyte x58 extreme integrated water cooling nvidia gtx285 2GB 3x2GB Kingston 1333mhz 
Hard DriveCoolingOSMonitor
2x1TB WD black XSPC 360AX win7 ultimate DELL U2311H 
PowerCaseMouseAudio
corsair AX1200 HAF-X logitech G400 audio technica ath-m50 
  hide details  
Reply
New Posts  All Forums:Forum Nav:
  Return Home
  Back to Forum: General Processor Discussions
Overclock.net › Forums › General Hardware › General Processor Discussions › new rig not coming on ? (help)