Originally Posted by Kuyumdzhiev
Can i test the Ram with software or i should manually set timing via BIOS and again blend test?
Manually set the fist 4 major timings in the bios, as I advised earlier. At ~900MHz speed, your ram should work great at 5-5-5-15, 2.2V leave the rest of the ram timings on AUTO for the time being.
The program to test your timings is called "Memtest". You'll have to burn it to a cd and boot your system with that cd. Let Memtest run all 9 tests 2x's and you can be sure that your timings are correct. Every time you change a mem-timing or voltage, run Memtest 2x's.
Once you are confident on your ram-timings, or have tweaked them down as far as they will go without reporting an error in Memtest, THEN you could try the Dram tester in Prime95 to test if your Dram/NB-volts are sufficient for the timings you set. After that, i'd try a Blend test.Edited by DChat - 3/8/11 at 3:25am