Hey guys, I bought a Lancool K58 case
Lancool K58
and will be building a water cooled and air cooled setup. The case comes with a 140mm intake in the front and a 120mm exhaust in the back. I plan on replacing both of these and adding 5 more fans, all with blue leds. I'll be using a 240mm rad for cooling the CPU strictly and using 4 fans in a push/pull config. Here are the fans:
Yate Loon 88 CFM
From what I've read here these are really good fans all around and especially for rad cooling with their high CFM rating.
Now for the exhaust fan in the back, I want to replace it with basically the same fan I linked above but I was thinking the model below which is 70 CFM instead of 88 - Yate Loon 70 CFM. I'm looking for some advice on whether I should stick to this or get the 88 CFM fan and whether it makes a big difference in the grand scheme of things.
The 140mm front intake fan I want to replace with a Yate Loon 140mm Blue Led. The problem is the CFM is lower than what I wanted for this fan coming in at right under 47. Not sure if this is a drawback or not but I can't seem to find another Yate Loon in this size with blue leds and a higher CFM rating. Maybe someone has a link? Or is the 47 CFM just fine?
Ok and the last fan is gonna go on the side window panel pretty much adjacent to the video card. I'm gonna go with the 120mm Yates I linked earlier but I was wondering should I get the 70 CFM or 88 CFM for this intake?
Thanks for reading, cheers
Lancool K58
and will be building a water cooled and air cooled setup. The case comes with a 140mm intake in the front and a 120mm exhaust in the back. I plan on replacing both of these and adding 5 more fans, all with blue leds. I'll be using a 240mm rad for cooling the CPU strictly and using 4 fans in a push/pull config. Here are the fans:
Yate Loon 88 CFM
From what I've read here these are really good fans all around and especially for rad cooling with their high CFM rating.
Now for the exhaust fan in the back, I want to replace it with basically the same fan I linked above but I was thinking the model below which is 70 CFM instead of 88 - Yate Loon 70 CFM. I'm looking for some advice on whether I should stick to this or get the 88 CFM fan and whether it makes a big difference in the grand scheme of things.
The 140mm front intake fan I want to replace with a Yate Loon 140mm Blue Led. The problem is the CFM is lower than what I wanted for this fan coming in at right under 47. Not sure if this is a drawback or not but I can't seem to find another Yate Loon in this size with blue leds and a higher CFM rating. Maybe someone has a link? Or is the 47 CFM just fine?
Ok and the last fan is gonna go on the side window panel pretty much adjacent to the video card. I'm gonna go with the 120mm Yates I linked earlier but I was wondering should I get the 70 CFM or 88 CFM for this intake?
Thanks for reading, cheers
Azura
(13 items) |
|
Azura
(13 items) |
