Overclock.net › Forums › AMD › AMD - General › Need some help with overclocking..
New Posts  All Forums:Forum Nav:

Need some help with overclocking..

post #1 of 29
Thread Starter 
I reached (sig rig)to 3.8ghz and its kinda stable but not enough and i was at 1.41v, but i been trying up and down on voltage and still not stable, the HT Clock was at 275 with 14multiplier. the NB voltage was at 1.3, and on other hand i noticed theres HT voltage which is based at 1.2... should i be messin with that since im high about 300 on clock? Been runnin the Intelburn which the Gflops were going up n down is why i notice its not stable.

Edited:
Oh btw, runnin Corsairs which they are the CL9.. runnin on 9-9-9-26-35 @ 1.65v
My System
(13 items)
 
  
CPUMotherboardGraphicsRAM
Phenom II X6 1055T M4A88TD-V EVO/USB3 Geforce Nvidia ENGT240 1GB GDDR5 8GB (2x4GB) Corsair Dominator GT 
Hard DriveOSPowerCase
640gb WD 6Gb/s 7200RPM 64mb Cache Windows 7 Ultimate x64 Antec 650W Rosewell Destroyer 
  hide details  
Reply
My System
(13 items)
 
  
CPUMotherboardGraphicsRAM
Phenom II X6 1055T M4A88TD-V EVO/USB3 Geforce Nvidia ENGT240 1GB GDDR5 8GB (2x4GB) Corsair Dominator GT 
Hard DriveOSPowerCase
640gb WD 6Gb/s 7200RPM 64mb Cache Windows 7 Ultimate x64 Antec 650W Rosewell Destroyer 
  hide details  
Reply
post #2 of 29
are cool & quiet or c1e enabled in bios

they will lower the multi and voltage when idle

for stability use prime95 small fft
or blend for ram test
post #3 of 29
Thread Starter 
Well i disabled both of those C1E and Cool n Quiet. CPU temp never exceeds 58-59 degree when i had it set on 3.9ghz, and when idle it runs at 34 degree C. But as said man, when i run it at 3.9ghz, most of time i cant get in desktop without bluescreened.
My System
(13 items)
 
  
CPUMotherboardGraphicsRAM
Phenom II X6 1055T M4A88TD-V EVO/USB3 Geforce Nvidia ENGT240 1GB GDDR5 8GB (2x4GB) Corsair Dominator GT 
Hard DriveOSPowerCase
640gb WD 6Gb/s 7200RPM 64mb Cache Windows 7 Ultimate x64 Antec 650W Rosewell Destroyer 
  hide details  
Reply
My System
(13 items)
 
  
CPUMotherboardGraphicsRAM
Phenom II X6 1055T M4A88TD-V EVO/USB3 Geforce Nvidia ENGT240 1GB GDDR5 8GB (2x4GB) Corsair Dominator GT 
Hard DriveOSPowerCase
640gb WD 6Gb/s 7200RPM 64mb Cache Windows 7 Ultimate x64 Antec 650W Rosewell Destroyer 
  hide details  
Reply
post #4 of 29
set the ht link down to stock speeds and 1.2v

idle temp is useless, max temp is 62c, what cooler are you using?
post #5 of 29
Thread Starter 

Using the

and i can get it to 4.1ghz running 290 ref clock, near 1600 mhz RAM with 9-9-9-26 @1.65v with 1.49vcore and 1.35nb, but i just cant get it stable.. blue screens soon as about 10 sec after intelburn runs.
My System
(13 items)
 
  
CPUMotherboardGraphicsRAM
Phenom II X6 1055T M4A88TD-V EVO/USB3 Geforce Nvidia ENGT240 1GB GDDR5 8GB (2x4GB) Corsair Dominator GT 
Hard DriveOSPowerCase
640gb WD 6Gb/s 7200RPM 64mb Cache Windows 7 Ultimate x64 Antec 650W Rosewell Destroyer 
  hide details  
Reply
My System
(13 items)
 
  
CPUMotherboardGraphicsRAM
Phenom II X6 1055T M4A88TD-V EVO/USB3 Geforce Nvidia ENGT240 1GB GDDR5 8GB (2x4GB) Corsair Dominator GT 
Hard DriveOSPowerCase
640gb WD 6Gb/s 7200RPM 64mb Cache Windows 7 Ultimate x64 Antec 650W Rosewell Destroyer 
  hide details  
Reply
post #6 of 29
Thread Starter 
bump
My System
(13 items)
 
  
CPUMotherboardGraphicsRAM
Phenom II X6 1055T M4A88TD-V EVO/USB3 Geforce Nvidia ENGT240 1GB GDDR5 8GB (2x4GB) Corsair Dominator GT 
Hard DriveOSPowerCase
640gb WD 6Gb/s 7200RPM 64mb Cache Windows 7 Ultimate x64 Antec 650W Rosewell Destroyer 
  hide details  
Reply
My System
(13 items)
 
  
CPUMotherboardGraphicsRAM
Phenom II X6 1055T M4A88TD-V EVO/USB3 Geforce Nvidia ENGT240 1GB GDDR5 8GB (2x4GB) Corsair Dominator GT 
Hard DriveOSPowerCase
640gb WD 6Gb/s 7200RPM 64mb Cache Windows 7 Ultimate x64 Antec 650W Rosewell Destroyer 
  hide details  
Reply
post #7 of 29
Quote:
Originally Posted by sschevy010 View Post
Using the NH-D14 and i can get it to 4.1ghz running 290 ref clock, near 1600 mhz RAM with 9-9-9-26 @1.65v with 1.49vcore and 1.35nb, but i just cant get it stable.. blue screens soon as about 10 sec after intelburn runs.
Have to ask, is the 1.35nb for CPU/NB or actual NB voltage?
Have you tried any prime95, any results to share? I'm not that use to ITB results myself.
Ryzen Build
(20 items)
 
 
Bruce
(14 items)
 
CPUMotherboardGraphicsRAM
R7 1800x Crosshair VI Hero Diamond 7970 GSkill FlareX F4-3200C14D-16GFX  
Hard DriveHard DriveHard DriveHard Drive
Samsung 960 EVO NVMe Samsung 840 SSD Corsair GT SSD WD 2TB Black 
Hard DriveCoolingCoolingCooling
WD 4TB Red EK-FB Asus C6H Monoblock XSPC GPU Razor WB XSPC RX 360 
CoolingCoolingCoolingCooling
XSPC RS 360 XSPC EX140 D5 Vario Gentle Typhoon AP-15 1850 rpm 
OSMonitorPowerCase
Win 10 Pro Asus VE248H x2 EVGA 850 G2 Xigmatek Elysium 
CPUMotherboardGraphicsRAM
FX 6350 Asus M5A99FX Pro R2.0 GTX220 G.Skill Ripjaws X F3-17000CL9D-8GBXLD 9-11-9-28... 
Hard DriveHard DriveHard DriveOptical Drive
Samsung 840 Pro WD20EFRX 64M Red x4 raid 10 WD5001AALS Blk Asus DRW-24B1ST 
CoolingOSMonitorKeyboard
Hyper 212 Evo R2 Windows Server 2008 R2 Standard Asus  Logitech MK300 
PowerCase
Corsair HX500 Corsair 330R Titainium 
  hide details  
Reply
Ryzen Build
(20 items)
 
 
Bruce
(14 items)
 
CPUMotherboardGraphicsRAM
R7 1800x Crosshair VI Hero Diamond 7970 GSkill FlareX F4-3200C14D-16GFX  
Hard DriveHard DriveHard DriveHard Drive
Samsung 960 EVO NVMe Samsung 840 SSD Corsair GT SSD WD 2TB Black 
Hard DriveCoolingCoolingCooling
WD 4TB Red EK-FB Asus C6H Monoblock XSPC GPU Razor WB XSPC RX 360 
CoolingCoolingCoolingCooling
XSPC RS 360 XSPC EX140 D5 Vario Gentle Typhoon AP-15 1850 rpm 
OSMonitorPowerCase
Win 10 Pro Asus VE248H x2 EVGA 850 G2 Xigmatek Elysium 
CPUMotherboardGraphicsRAM
FX 6350 Asus M5A99FX Pro R2.0 GTX220 G.Skill Ripjaws X F3-17000CL9D-8GBXLD 9-11-9-28... 
Hard DriveHard DriveHard DriveOptical Drive
Samsung 840 Pro WD20EFRX 64M Red x4 raid 10 WD5001AALS Blk Asus DRW-24B1ST 
CoolingOSMonitorKeyboard
Hyper 212 Evo R2 Windows Server 2008 R2 Standard Asus  Logitech MK300 
PowerCase
Corsair HX500 Corsair 330R Titainium 
  hide details  
Reply
post #8 of 29
Thread Starter 
well i would thought im suppose to OC the CPU/NB right? or am i wrong? thats what its for..
My System
(13 items)
 
  
CPUMotherboardGraphicsRAM
Phenom II X6 1055T M4A88TD-V EVO/USB3 Geforce Nvidia ENGT240 1GB GDDR5 8GB (2x4GB) Corsair Dominator GT 
Hard DriveOSPowerCase
640gb WD 6Gb/s 7200RPM 64mb Cache Windows 7 Ultimate x64 Antec 650W Rosewell Destroyer 
  hide details  
Reply
My System
(13 items)
 
  
CPUMotherboardGraphicsRAM
Phenom II X6 1055T M4A88TD-V EVO/USB3 Geforce Nvidia ENGT240 1GB GDDR5 8GB (2x4GB) Corsair Dominator GT 
Hard DriveOSPowerCase
640gb WD 6Gb/s 7200RPM 64mb Cache Windows 7 Ultimate x64 Antec 650W Rosewell Destroyer 
  hide details  
Reply
post #9 of 29
When you are running IntelBurnTest, it doesnt matter how fast the gflops are, as long as the result numbers are the same and you dont bsod after 10-20 runs then your fine... and dont use prime95, intelburntest is 100 times better.
    
CPUMotherboardGraphicsRAM
i5 650 @ 4.0GHz [1.36V] Gigabyte H55N-USB3 Sapphire Radeon HD 6870 @ 1GHz 1000/1200 [1.28V] G.Skill Ripjaws 8GB @ 6-8-7-24-1T 1280Mhz [1.66V] 
Hard DriveOSMonitorPower
Seagate 160GB & WD 160GB Win 7 Home Premium 64-bit x3 Acer S211HLBD 21.5" Kingwin Lazer 750W 
Case
Antec 902 V3 
  hide details  
Reply
    
CPUMotherboardGraphicsRAM
i5 650 @ 4.0GHz [1.36V] Gigabyte H55N-USB3 Sapphire Radeon HD 6870 @ 1GHz 1000/1200 [1.28V] G.Skill Ripjaws 8GB @ 6-8-7-24-1T 1280Mhz [1.66V] 
Hard DriveOSMonitorPower
Seagate 160GB & WD 160GB Win 7 Home Premium 64-bit x3 Acer S211HLBD 21.5" Kingwin Lazer 750W 
Case
Antec 902 V3 
  hide details  
Reply
post #10 of 29
Thread Starter 
you know i hope your quoting him, i knew that from xd_1771, the help i need is settings
My System
(13 items)
 
  
CPUMotherboardGraphicsRAM
Phenom II X6 1055T M4A88TD-V EVO/USB3 Geforce Nvidia ENGT240 1GB GDDR5 8GB (2x4GB) Corsair Dominator GT 
Hard DriveOSPowerCase
640gb WD 6Gb/s 7200RPM 64mb Cache Windows 7 Ultimate x64 Antec 650W Rosewell Destroyer 
  hide details  
Reply
My System
(13 items)
 
  
CPUMotherboardGraphicsRAM
Phenom II X6 1055T M4A88TD-V EVO/USB3 Geforce Nvidia ENGT240 1GB GDDR5 8GB (2x4GB) Corsair Dominator GT 
Hard DriveOSPowerCase
640gb WD 6Gb/s 7200RPM 64mb Cache Windows 7 Ultimate x64 Antec 650W Rosewell Destroyer 
  hide details  
Reply
New Posts  All Forums:Forum Nav:
  Return Home
  Back to Forum: AMD - General
Overclock.net › Forums › AMD › AMD - General › Need some help with overclocking..