Originally Posted by WorldExclusive;12681810
Don't listen to those fan size claims. It comes down to how noisy the fan with be a full rpm, whether the motherboard or PSU would be the best solution to power the fans. Fans operate up to 12V, which todays motherboards support. The larger fans aren't noisy so they don't need to be controled(unless you're looking for silence), mainly because the 600T has average cooling.
As for the CPU cooler used, if you use a tower the Prolimatech, they recommend a 50mm fan to be mounted on the board. The shield keeps the board very cool, cooler than my previous R3E and R3G motherboards. Temps are in the 23-27C range.
My current PC is by far the coolest(in temps) PC I've ever owned.
The 600T comes with two 200mm fans and one 120mm fan. Will I be able to hook up all of those to the Silverstone Strider ST1000-G?
Until now I've always hooked fans to the motherboard but the fans used in older cases were much smaller (80mm and below). I've never hooked up a fan to the power supply, and am not sure how to go about it. I guess when the case and power supply arrive, I'll be able to figure out how to hook them up. In the meantime, any helpful tips are welcome.