I never expected this build log to run out 23 pages+. I'm quite surprised.
On the previous page there is some talk of skill vs tools.
I consider myself a decent woodworker but there are a ton of pros out there
that would make my work look like an apprentice's.
I'm in the camp that says it's not the tools but the know how that makes the difference.
The know how comes from doing.
The fancy tools just make things easier and faster to accomplish.
If you look back at the first page of the log you'll see I chose to use basic tools for this project.
Seriously,if you are familiar with those tools and can make a square cut(and I mean square) this
project should be doable.
Originally Posted by Ra1dMaX
now my only thought is...how much would you charge to build this and flatpack it with schematics to assemble it(this would be for the whole desk without the hardware but included fans and the mainboard tray)
Um,I don't do IKEA,lol.
To do what you ask would require a redesign.
Several people have asked me to build one for them,but I'm not set up for mass production which makes the cost and time
prohibitive for a custom one off.
This kind of thing would be great if I were retired with alot of time.......2 years to go!