Overclock.net › Forums › Case Mods & Cases › Computer Cases › Corsair 600T front I/O help
New Posts  All Forums:Forum Nav:

Corsair 600T front I/O help

post #1 of 6
Thread Starter 
I have a question about the front panel wiring for the corsair 600t case if anyone could be of help. Every case i have encountered has had +/- on there front panel wiring or wires all the same color for the negatives. The 600t front panel wires are like ALL different colors. The case did not come with a wiring manual and from what i have seen there isn't one online either. Any help is appreciated.
post #2 of 6
Thread Starter 
Any insight?
+ rep
post #3 of 6
The front panel connectors should have a small triangle that denotes the Pin 1 (or +) wire.

It's molded into the plastic.
post #4 of 6
Thread Starter 
Quote:
Originally Posted by CorsairGeorge;12694595 
The front panel connectors should have a small triangle that denotes the Pin 1 (or +) wire.

It's molded into the plastic.

Ok the ones that matter though are the LED's correct? If they are on they are connected correctly and the pwr sw and reset just short the pins so they don't really matter correct?
post #5 of 6
Yeah power and reset don't matter. The LEDs are really the only ones that matter.
post #6 of 6
Thread Starter 
Quote:
Originally Posted by CorsairGeorge;12694669 
Yeah power and reset don't matter. The LEDs are really the only ones that matter.

Ok all is well then, i appreciate the response.
+ Rep
New Posts  All Forums:Forum Nav:
  Return Home
  Back to Forum: Computer Cases
Overclock.net › Forums › Case Mods & Cases › Computer Cases › Corsair 600T front I/O help