Overclock.net › Forums › Intel › Intel CPUs › 2005K 1st timer OC. This OK?
New Posts  All Forums:Forum Nav:

2005K 1st timer OC. This OK?

post #1 of 22
Thread Starter 
So right now im at 4.5 with auto voltage. Is it ok to have voltages on auto? Im using Corsair A70 as my cooler. If im running it 4.5 24/7. How high can I go with auto voltages?
post #2 of 22
Ambient temperatures of the room and Load temperatures of the Processor? Can we get a CPU-z validation to get more info?
    
CPUMotherboardGraphicsRAM
Xeon w3680 Gigabyte X58A-UD3R GTX 295 Engineering Samples 2X Corsair XMS3 
Hard DriveHard DriveCoolingOS
Sandisk SSD Seagate Corsair H50 W7 Ult 
MonitorMonitorKeyboardCase
Viewsonic VA1912wb Viewsonic VA912b K350 CM HAF 
Mouse
Logitech M570 
  hide details  
Reply
    
CPUMotherboardGraphicsRAM
Xeon w3680 Gigabyte X58A-UD3R GTX 295 Engineering Samples 2X Corsair XMS3 
Hard DriveHard DriveCoolingOS
Sandisk SSD Seagate Corsair H50 W7 Ult 
MonitorMonitorKeyboardCase
Viewsonic VA1912wb Viewsonic VA912b K350 CM HAF 
Mouse
Logitech M570 
  hide details  
Reply
post #3 of 22
ok now go back into bios, see what the auto voltage setting was, make it manually, then start lowering it a notch at a time and checking for stability.
Easy V3
(17 items)
 
12 Pack
(15 items)
 
 
CPUMotherboardGraphicsRAM
i7-4820k Asus Rampage IV BE evga 1080ti FE w/ hybrid kit 16 GB G.Skill Trident X 2400mhz  
Hard DriveHard DriveOptical DriveCooling
Samsung 840 EVO 120gb Samsung 840 EVO 1TB Samsung Blu-ray Corsair H110 
OSMonitorKeyboardPower
windows 10 Asus PG278Q Ducky Shine 3 - blue led - cherry mx browns Seasonic Platinum-1000 
CaseMouseMouse PadAudio
Dimastech Easy V3 Mionix NAOS 8200 Mionix Ensis 320 titanium HD  
Other
audio technica ATH-A900X 
  hide details  
Reply
Easy V3
(17 items)
 
12 Pack
(15 items)
 
 
CPUMotherboardGraphicsRAM
i7-4820k Asus Rampage IV BE evga 1080ti FE w/ hybrid kit 16 GB G.Skill Trident X 2400mhz  
Hard DriveHard DriveOptical DriveCooling
Samsung 840 EVO 120gb Samsung 840 EVO 1TB Samsung Blu-ray Corsair H110 
OSMonitorKeyboardPower
windows 10 Asus PG278Q Ducky Shine 3 - blue led - cherry mx browns Seasonic Platinum-1000 
CaseMouseMouse PadAudio
Dimastech Easy V3 Mionix NAOS 8200 Mionix Ensis 320 titanium HD  
Other
audio technica ATH-A900X 
  hide details  
Reply
post #4 of 22
Thread Starter 
post #5 of 22
http://www.bit-tech.net/hardware/cpu...ore-i5-2500k/1

Read the glossary part and the MSI part.

The only voltage you have to change when overclocking is vcore.
CPUIO is for RAM overclocking and is not important unless your RAM is unstable (just use 1.1V).
System Agent voltage is supposed to stay under 1V (put it at something like 0.95-0.99).
CPU PLL voltage should be 1.8V.

DRAM voltage is for your RAM and should be between 1.5V and 1.65V. Don't go over 1.65V.
Edited by B!0HaZard - 3/12/11 at 6:53am
M1XN
(18 items)
 
Study Zenbook
(5 items)
 
 
CPUMotherboardGraphicsRAM
i7 4770K @ 4.2 GHz ASUS Maximus VI Impact MSI GTX 970 Gaming 4G 2x8 GB Kingston HyperX DDR3 @ 2400 MHz 
Hard DriveHard DriveHard DriveOptical Drive
Crucial M4 64 GB Crucial M4 128 GB SAMSUNG Spinpoint M9T 2 TB LiteOn DL-8ATSH 
CoolingOSMonitorKeyboard
Noctua NH-C14 Windows 10 64-bit ViewSonic VP2770 Vortex Pok3r 
PowerCaseMouseMouse Pad
Corsair SF600 NCASE M1 V2.5 Logitech G502 SteelSeries QcK+ 
AudioOther
HiFiMan HE-400 Logitech C920 
CPUGraphicsRAMHard Drive
i5-3317 GT 620M 2 GB soldered + 8 GB Corsair OCZ Vertex 3 120 
OS
Windows 7 Home Premium 64-bit 
  hide details  
Reply
M1XN
(18 items)
 
Study Zenbook
(5 items)
 
 
CPUMotherboardGraphicsRAM
i7 4770K @ 4.2 GHz ASUS Maximus VI Impact MSI GTX 970 Gaming 4G 2x8 GB Kingston HyperX DDR3 @ 2400 MHz 
Hard DriveHard DriveHard DriveOptical Drive
Crucial M4 64 GB Crucial M4 128 GB SAMSUNG Spinpoint M9T 2 TB LiteOn DL-8ATSH 
CoolingOSMonitorKeyboard
Noctua NH-C14 Windows 10 64-bit ViewSonic VP2770 Vortex Pok3r 
PowerCaseMouseMouse Pad
Corsair SF600 NCASE M1 V2.5 Logitech G502 SteelSeries QcK+ 
AudioOther
HiFiMan HE-400 Logitech C920 
CPUGraphicsRAMHard Drive
i5-3317 GT 620M 2 GB soldered + 8 GB Corsair OCZ Vertex 3 120 
OS
Windows 7 Home Premium 64-bit 
  hide details  
Reply
post #6 of 22
That Vcore seems a bit high for 4.5GHz~.
    
CPUMotherboardGraphicsRAM
Xeon w3680 Gigabyte X58A-UD3R GTX 295 Engineering Samples 2X Corsair XMS3 
Hard DriveHard DriveCoolingOS
Sandisk SSD Seagate Corsair H50 W7 Ult 
MonitorMonitorKeyboardCase
Viewsonic VA1912wb Viewsonic VA912b K350 CM HAF 
Mouse
Logitech M570 
  hide details  
Reply
    
CPUMotherboardGraphicsRAM
Xeon w3680 Gigabyte X58A-UD3R GTX 295 Engineering Samples 2X Corsair XMS3 
Hard DriveHard DriveCoolingOS
Sandisk SSD Seagate Corsair H50 W7 Ult 
MonitorMonitorKeyboardCase
Viewsonic VA1912wb Viewsonic VA912b K350 CM HAF 
Mouse
Logitech M570 
  hide details  
Reply
post #7 of 22
Thread Starter 
Quote:
Originally Posted by B!0HaZard View Post
http://www.bit-tech.net/hardware/cpu...ore-i5-2500k/1

Read the glossary part and the MSI part.

The only voltage you have to change when overclocking is vcore. CPUIO is for RAM overclocking, System Agent voltage is supposed to stay under 1V (put it at something like 0.95-0.99), CPU PLL voltage should be 1.8V.
Yeah I used that guide already. System didnt boot. Tried lowering multiplier and it didnt boot either.
post #8 of 22
Quote:
Originally Posted by CtrlAltElite View Post
Yeah I used that guide already. System didnt boot. Tried lowering multiplier and it didnt boot either.
You probably used too low vcore or too low DRAM voltage. Use my instructions, they should work.

What RAM are you using? Do you know what they're rated at? Make sure the DRAM voltage is correct or it'll be hard to find the instability.
Edited by B!0HaZard - 3/12/11 at 6:56am
M1XN
(18 items)
 
Study Zenbook
(5 items)
 
 
CPUMotherboardGraphicsRAM
i7 4770K @ 4.2 GHz ASUS Maximus VI Impact MSI GTX 970 Gaming 4G 2x8 GB Kingston HyperX DDR3 @ 2400 MHz 
Hard DriveHard DriveHard DriveOptical Drive
Crucial M4 64 GB Crucial M4 128 GB SAMSUNG Spinpoint M9T 2 TB LiteOn DL-8ATSH 
CoolingOSMonitorKeyboard
Noctua NH-C14 Windows 10 64-bit ViewSonic VP2770 Vortex Pok3r 
PowerCaseMouseMouse Pad
Corsair SF600 NCASE M1 V2.5 Logitech G502 SteelSeries QcK+ 
AudioOther
HiFiMan HE-400 Logitech C920 
CPUGraphicsRAMHard Drive
i5-3317 GT 620M 2 GB soldered + 8 GB Corsair OCZ Vertex 3 120 
OS
Windows 7 Home Premium 64-bit 
  hide details  
Reply
M1XN
(18 items)
 
Study Zenbook
(5 items)
 
 
CPUMotherboardGraphicsRAM
i7 4770K @ 4.2 GHz ASUS Maximus VI Impact MSI GTX 970 Gaming 4G 2x8 GB Kingston HyperX DDR3 @ 2400 MHz 
Hard DriveHard DriveHard DriveOptical Drive
Crucial M4 64 GB Crucial M4 128 GB SAMSUNG Spinpoint M9T 2 TB LiteOn DL-8ATSH 
CoolingOSMonitorKeyboard
Noctua NH-C14 Windows 10 64-bit ViewSonic VP2770 Vortex Pok3r 
PowerCaseMouseMouse Pad
Corsair SF600 NCASE M1 V2.5 Logitech G502 SteelSeries QcK+ 
AudioOther
HiFiMan HE-400 Logitech C920 
CPUGraphicsRAMHard Drive
i5-3317 GT 620M 2 GB soldered + 8 GB Corsair OCZ Vertex 3 120 
OS
Windows 7 Home Premium 64-bit 
  hide details  
Reply
post #9 of 22
Thread Starter 
Quote:
Originally Posted by B!0HaZard View Post
You probably used too low vcore or too low DRAM voltage. Use my instructions, they should work.

What RAM are you using? Do you know what they're rated at? Make sure the DRAM voltage is correct or it'll be hard to find the instability.
1600/ 9-9-9-24 @ 1.5v
post #10 of 22
Are you sure it's rated for 1.5? Nice kit if it is.
M1XN
(18 items)
 
Study Zenbook
(5 items)
 
 
CPUMotherboardGraphicsRAM
i7 4770K @ 4.2 GHz ASUS Maximus VI Impact MSI GTX 970 Gaming 4G 2x8 GB Kingston HyperX DDR3 @ 2400 MHz 
Hard DriveHard DriveHard DriveOptical Drive
Crucial M4 64 GB Crucial M4 128 GB SAMSUNG Spinpoint M9T 2 TB LiteOn DL-8ATSH 
CoolingOSMonitorKeyboard
Noctua NH-C14 Windows 10 64-bit ViewSonic VP2770 Vortex Pok3r 
PowerCaseMouseMouse Pad
Corsair SF600 NCASE M1 V2.5 Logitech G502 SteelSeries QcK+ 
AudioOther
HiFiMan HE-400 Logitech C920 
CPUGraphicsRAMHard Drive
i5-3317 GT 620M 2 GB soldered + 8 GB Corsair OCZ Vertex 3 120 
OS
Windows 7 Home Premium 64-bit 
  hide details  
Reply
M1XN
(18 items)
 
Study Zenbook
(5 items)
 
 
CPUMotherboardGraphicsRAM
i7 4770K @ 4.2 GHz ASUS Maximus VI Impact MSI GTX 970 Gaming 4G 2x8 GB Kingston HyperX DDR3 @ 2400 MHz 
Hard DriveHard DriveHard DriveOptical Drive
Crucial M4 64 GB Crucial M4 128 GB SAMSUNG Spinpoint M9T 2 TB LiteOn DL-8ATSH 
CoolingOSMonitorKeyboard
Noctua NH-C14 Windows 10 64-bit ViewSonic VP2770 Vortex Pok3r 
PowerCaseMouseMouse Pad
Corsair SF600 NCASE M1 V2.5 Logitech G502 SteelSeries QcK+ 
AudioOther
HiFiMan HE-400 Logitech C920 
CPUGraphicsRAMHard Drive
i5-3317 GT 620M 2 GB soldered + 8 GB Corsair OCZ Vertex 3 120 
OS
Windows 7 Home Premium 64-bit 
  hide details  
Reply
New Posts  All Forums:Forum Nav:
  Return Home
  Back to Forum: Intel CPUs
Overclock.net › Forums › Intel › Intel CPUs › 2005K 1st timer OC. This OK?