Originally Posted by Drjuice164
After first time putting it together.
Still has alot of room for improvement.
If you have any suggestions let me know
your ram isn't in dual channel mode
take that molexcable you got pluged into your mobo and read/top fans and hide it run it to the back of your case. take the rear exhaust fan tunr it to where the 3-pin/molex is at your top right corner then take both the rear and top cables and run them through the hole right below your top fan. take that molex line i told you to run to the back and connect and zip tie off. you shouldn't need that molex plugged into the mobo.
now take your optical's sata line and run it into the whole where your video card cable is going and then run up to the 24-pin hole and then in the back where the sata cable goes out both holes pull it fold it zip tie it off.
take your hdd's sata power cables run it up to the mobo entry hole then back down on the other side stuff it in the back plug in what ones you need and zip tie the rest off.
now take the hdd's sata cable and pull it tight and zip tie it off and tuck away
that alone should help you out.
lmk how it goes.