Overclock.net › Forums › Case Mods & Cases › Other Hardware Mods › Cables and Sleeving › Post your "rate my cables" here
New Posts  All Forums:Forum Nav:

Post your "rate my cables" here - Page 16

post #151 of 27686
Quote:
Originally Posted by Fishie36
Looks like you've got all your side panel fans blowing the wrong way.
What do you propose??? I have two intake fan (CPU/GPU) and the two others are exhaust. Plus I have a front intake,rear and top exhaust(all 120mm). Is there a better configuration possible?

Quote:
Originally Posted by maverick777
You can greatly cleanup your wire mess by getting some fan cable extensions and run the wires along the inside of the top rail. That's what I did in mine. The stacker is a HUGE case so managing your wires is a much easier job if you put some time into it.

Other than that, I hope you're enjoying your case.

Here's a pic of my case if you need some ideas. Look at how I ran the fan cable behind the top rail.
Well that sound good, i'll check for wire extension. I'll post back some pics when it will be done. thanks both of you I like to have comment on how improve my system!
My System
(13 items)
 
  
CPUMotherboardGraphicsRAM
Amd X2 4400 A8N32-sli 8800gt EVGA SsC 2GB OCZ Plat. EB PC4000 
Hard DriveOptical DriveOSMonitor
36GB Raptor(Raid0) + 74GB Raptor + 250GB WD Plextar SATA DVD Writer XP SP2 Samsung SyncMaster 206BW 
KeyboardPowerCaseMouse
Saytech Eclipse Enermax noiseTaker 600sli CM Stacker 830 Razor Copperhead 
Mouse Pad
Razor Mantis Control 
  hide details  
Reply
My System
(13 items)
 
  
CPUMotherboardGraphicsRAM
Amd X2 4400 A8N32-sli 8800gt EVGA SsC 2GB OCZ Plat. EB PC4000 
Hard DriveOptical DriveOSMonitor
36GB Raptor(Raid0) + 74GB Raptor + 250GB WD Plextar SATA DVD Writer XP SP2 Samsung SyncMaster 206BW 
KeyboardPowerCaseMouse
Saytech Eclipse Enermax noiseTaker 600sli CM Stacker 830 Razor Copperhead 
Mouse Pad
Razor Mantis Control 
  hide details  
Reply

Gear mentioned in this thread:

post #152 of 27686
Quote:
Originally Posted by BrinNutz
no love?
Yeah dude, its looks sexeh.
Hatredcomputer
(13 items)
 
  
CPUMotherboardGraphicsRAM
i7 920 Asus P6T6 Revolution eVGA 8800GTS (for now) RipJaws 6GB DDR3 2000 
Hard DriveOptical DriveOSMonitor
2x Samsung 500GB RAID0 Plextor PX755SA 7 x64 Samsung 24" 
KeyboardPowerCaseMouse
Arctosa Corsair HX750 Modular Silverstone TJ07-BW Razer Lachesis 
  hide details  
Reply
Hatredcomputer
(13 items)
 
  
CPUMotherboardGraphicsRAM
i7 920 Asus P6T6 Revolution eVGA 8800GTS (for now) RipJaws 6GB DDR3 2000 
Hard DriveOptical DriveOSMonitor
2x Samsung 500GB RAID0 Plextor PX755SA 7 x64 Samsung 24" 
KeyboardPowerCaseMouse
Arctosa Corsair HX750 Modular Silverstone TJ07-BW Razer Lachesis 
  hide details  
Reply
post #153 of 27686
Here we are, I only stuck 2 cables behind the mobo (not behind the tray, like right under the mobo itself lol) and the rest are in the 5.25in bays under my DVD drive, that's gonna be a pain when I get my 5.25in fan controller tomorrow lol!

iMac 27"
(15 items)
 
  
Reply
iMac 27"
(15 items)
 
  
Reply
post #154 of 27686
Quote:
Originally Posted by Mr-P
What do you propose??? I have two intake fan (CPU/GPU) and the two others are exhaust. Plus I have a front intake,rear and top exhaust(all 120mm). Is there a better configuration possible?
If it were me I would leave the front as intake, change all the side to intake, and have the rear as exhaust. Maybe add a top blowhole also to help vent all that intake.
Main Rig
(14 items)
 
  
CPUMotherboardGraphicsRAM
i5 2500K Asus P8P67 EVO GTX 980 16GB DDR3 1866mhz 
Hard DriveCoolingOSMonitor
Revodrive 3 x2 240GB, M500 960GB, 2x WD 1TB Rai... Noctua NH-D14 Windows 10 Apple Cinema 30" 1600p 
KeyboardPowerCaseMouse
Logitech Orion Spark Capstone 750w CM Storm Scout Logitech G700s 
  hide details  
Reply
Main Rig
(14 items)
 
  
CPUMotherboardGraphicsRAM
i5 2500K Asus P8P67 EVO GTX 980 16GB DDR3 1866mhz 
Hard DriveCoolingOSMonitor
Revodrive 3 x2 240GB, M500 960GB, 2x WD 1TB Rai... Noctua NH-D14 Windows 10 Apple Cinema 30" 1600p 
KeyboardPowerCaseMouse
Logitech Orion Spark Capstone 750w CM Storm Scout Logitech G700s 
  hide details  
Reply
post #155 of 27686
Quote:
Originally Posted by Fishie36
If it were me I would leave the front as intake, change all the side to intake, and have the rear as exhaust. Maybe add a top blowhole also to help vent all that intake.
But If I do that i'll have 5 intake fans and only 2 exhaust (my rear and top 120mm are already exhaust) With my current setup I have 3 intake and 4 exhaust but two of my intake fan are 150CFM. I'll give it a try and I'll see if the temps drops. I always though that it was better to have more exhaust though! Anyway I'll try and give you the result fishie36
My System
(13 items)
 
  
CPUMotherboardGraphicsRAM
Amd X2 4400 A8N32-sli 8800gt EVGA SsC 2GB OCZ Plat. EB PC4000 
Hard DriveOptical DriveOSMonitor
36GB Raptor(Raid0) + 74GB Raptor + 250GB WD Plextar SATA DVD Writer XP SP2 Samsung SyncMaster 206BW 
KeyboardPowerCaseMouse
Saytech Eclipse Enermax noiseTaker 600sli CM Stacker 830 Razor Copperhead 
Mouse Pad
Razor Mantis Control 
  hide details  
Reply
My System
(13 items)
 
  
CPUMotherboardGraphicsRAM
Amd X2 4400 A8N32-sli 8800gt EVGA SsC 2GB OCZ Plat. EB PC4000 
Hard DriveOptical DriveOSMonitor
36GB Raptor(Raid0) + 74GB Raptor + 250GB WD Plextar SATA DVD Writer XP SP2 Samsung SyncMaster 206BW 
KeyboardPowerCaseMouse
Saytech Eclipse Enermax noiseTaker 600sli CM Stacker 830 Razor Copperhead 
Mouse Pad
Razor Mantis Control 
  hide details  
Reply
post #156 of 27686
Im still tweaking my PC

New System
(13 items)
 
  
CPUMotherboardGraphicsRAM
AMD Athlon II X4 630 Biostar TA760G M2+ Sapphire HD5870 2GB EyeFinity 6 Edition Corsair 4 (2GB x 2) XMS2 DDR2 
Hard DriveOSMonitorKeyboard
Hitachi Deskstar 750GB SATA HDD Windows 7 Ultimate (64) Dell 20" UltraSharp 2009W DKT Board EverGlide 
PowerCaseMouse
Antec TPQ-850 Cooler Master 832 A4 Tech X7 
  hide details  
Reply
New System
(13 items)
 
  
CPUMotherboardGraphicsRAM
AMD Athlon II X4 630 Biostar TA760G M2+ Sapphire HD5870 2GB EyeFinity 6 Edition Corsair 4 (2GB x 2) XMS2 DDR2 
Hard DriveOSMonitorKeyboard
Hitachi Deskstar 750GB SATA HDD Windows 7 Ultimate (64) Dell 20" UltraSharp 2009W DKT Board EverGlide 
PowerCaseMouse
Antec TPQ-850 Cooler Master 832 A4 Tech X7 
  hide details  
Reply
post #157 of 27686
post #158 of 27686
Hey everyone. I posted my AM2 build a couple weeks ago when I finished building it. I have since added cathodes, an x-fi card, and connected a usb panel in the back. I swapped out my blue LED's because they weren't bright enough. I will also be adding 2 WD 320gb HD's on Monday (all the cables are ready to be connected, you can see the power cable I put on the side in the pick below). Anyhow, I redid the wiring in preparation for my new HD's. Let me know what you think and how I can improve on it.

PS: I don't want to drill any holes in my case.

Before:


After:


I hid the power cable on the side and ran it below my HD's bay since I will be connecting 2 more HD's on Monday. 2 more SATA cables are sitting in my 5.25 bays ready to be connected also.

Cathodes on:


EDIT (added 2 HD's)
post #159 of 27686
heh, i should post pics of mine so youll see how i used to idle at 75 C.
My System
(13 items)
 
  
CPUMotherboardGraphicsRAM
Athlon 64 3400+ Newcastle Abit KV8-Pro X800xt AIW 2Gb Rosewill DDR400 
Hard DriveOSMonitorPower
74Gb Raptor Windows XP Home SP2 19" 8ms Rosewill LCD Aspire Chameleon 550W 
Case
NZXT Nemesis Elite 
  hide details  
Reply
My System
(13 items)
 
  
CPUMotherboardGraphicsRAM
Athlon 64 3400+ Newcastle Abit KV8-Pro X800xt AIW 2Gb Rosewill DDR400 
Hard DriveOSMonitorPower
74Gb Raptor Windows XP Home SP2 19" 8ms Rosewill LCD Aspire Chameleon 550W 
Case
NZXT Nemesis Elite 
  hide details  
Reply
post #160 of 27686
LOL i'm no biggie on wire management

My Case

4/10 ?
Kopisaurus
(13 items)
 
  
CPUMotherboardGraphicsRAM
Intel 2500k @ 5ghz 1.395v Gigabyte P67A-UD3P-B3 ATI HD6950 2GB (flashed --> 6970) 16GB Gskill Sniper 1600mhz 
Hard DriveOptical DriveOSMonitor
500gb WD Black / 2x 1TB WD Black RAID1 LG DVD/RW Super Multi Windows 7 Enterprise x64 ASUS ML239H 23" LED  
KeyboardPowerCaseMouse
Logitech G15 (modded) Corsair TV750W V2 Lian-Li Lancool PC-K62B Logitech G5 
  hide details  
Reply
Kopisaurus
(13 items)
 
  
CPUMotherboardGraphicsRAM
Intel 2500k @ 5ghz 1.395v Gigabyte P67A-UD3P-B3 ATI HD6950 2GB (flashed --> 6970) 16GB Gskill Sniper 1600mhz 
Hard DriveOptical DriveOSMonitor
500gb WD Black / 2x 1TB WD Black RAID1 LG DVD/RW Super Multi Windows 7 Enterprise x64 ASUS ML239H 23" LED  
KeyboardPowerCaseMouse
Logitech G15 (modded) Corsair TV750W V2 Lian-Li Lancool PC-K62B Logitech G5 
  hide details  
Reply
New Posts  All Forums:Forum Nav:
  Return Home
  Back to Forum: Cables and Sleeving

Gear mentioned in this thread:

Overclock.net › Forums › Case Mods & Cases › Other Hardware Mods › Cables and Sleeving › Post your "rate my cables" here