Post your "rate my cables" here - Page 2302

Warning: Spoiler! (Click to show)
11/10
Edited by DizzlePro - 8/1/12 at 2:14pm

Warning: Spoiler! (Click to show) so nice! I have the maximus v formula on the way right now, i hope it performs as well as it looks! 10/10 for cables!

Warning: Spoiler! (Click to show)
Very tidy work! Looks great, 9/10 without sleeving, 10/10 with sleeving
Warning: Spoiler! (Click to show)
I'd give you an easy 10/10 for cables.

And a 20/10 for the overall looks!

@snipekill2445 thanks man when i get the money i can get some sleeving heppening again thanks

Here're the rigs in my sig.

Mine:




GF's:



Please rate. Thank you.

Here is my 6th rig






waiting for comment thank you ^^

I don't see much room for improvement. I 2nd snipekill2445 suggestion about the sata cables. Bring that orange one down with the other sata cables and zip tie them together. Im going to rate this 8/10 because it's not bad management, but your limited by your case. Nice upgrade too!

Nice cable management. I dont know what I rated your rig last time, but 9.5/10. Where are you sata/power cable for you ODD?

I would run the 8pin in the back and through the cpu hole on the mobo tray. I've done it a few times when the cable doesnt reach or there isn't a grommet for the cable to pass through. The cables on the top right behind the ODD can be cleaned up. I would also run what looks like the HDD cable through the back and around the HDD cage so it's not in plain sight. Other than that, not bad, i'll rate it a 8.5/10.

Looks pretty clean to me. I see some cables on the top right and below your 5.25" bay. 9/10.

Nice job, 9/10!

I like it! 10/10!
Both rigs look super clean. I don't see any stragglers under the 5.25" bay and the ones I do see are lined up pretty well. The only suggestion for your rig would be zip ties for the GPU cables. Your wife's rig is spot on! The only eye sore imo would be the USB cable and the Power cables on the bottom right of the mobo. With a mATX mobo, the cables are more noticeable and can be easily hidden if you ran them behind the mobo tray and behind and under the mobo.
Great job on both rigs, 9.5/10 both!
Nice rig! 690's in sli, new corsair RAM/Fans, and the piping looks sick (from what I can see). Can't really see the cables inside the rig because of the lighting, but behind the mobo tray looks pretty well managed. 10/10 for a beast rig and for the behind the mobo tray, 9/10 for management. Take a better pic inside of the case and i'll rate it then.
Edited by mironccr345 - 8/2/12 at 7:32am

I would rate the cables, but it's too dark to see You should post again with pictures that show the entire inside with better lighting because your rig looks SICK!!! The platinum memory, 690's, and custom loop look gorgeous, but I can't really see them very good

You should also fill out your rig specs on your profile page so we can see what that beast is made of

Thanks for the response i don't have that motherboard anymore since i upgraded a while back i just don't have a decent good pic. also i don't think you realize what the case is.. its the antec 900 first gen from 2007 so came before any cases had cable holes and well designed layout to hide cables. there is very little room behind the mobo tray and because of that this case has been heavily chopped about to get stuff round the back and to mount the hard drives reversed. Oh and btw that cable running by the bottom of the case is just an extra loop of molex connectors i stuffed under there as they were never used.

I'm buying a new camera tomorrow so i will post some pictures of what it is like with a motherboard with a more decent layout.

Cheers for the feedback man !
Edited by Theloudtrout - 8/2/12 at 8:03am