Ok i just did the stresstest. and my 6th window failed within 1 minute of me starting it, it says to locate stress.txt but there is no such file. Could be because my stresstest froze (not bluescreened this time actually) exactly 10 mins into it.
Unless this is what they meant, i went poking and prodding for the damn file.
[Wed Mar 16 21:47:48 2011]
FATAL ERROR: Resulting sum was 9446370230403072, expected: 2851756471154623
Hardware failure detected, consult stress.txt file.
[Wed Mar 16 22:38:45 2011]
Compare your results to other computers at http://www.mersenne.org/report_benchmarks
AMD Phenom(tm) II X6 1090T Processor
CPU speed: 3210.80 MHz, 6 cores
CPU features: RDTSC, CMOV, Prefetch, 3DNow!, MMX, SSE, SSE2
L1 cache size: 64 KB
L2 cache size: 512 KB, L3 cache size: 6 MB
L1 cache line size: 64 bytes
L2 cache line size: 64 bytes
L1 TLBS: 48
L2 TLBS: 512
Prime95 64-bit version 25.11, RdtscTiming=1
Best time for 768K FFT length: 11.080 ms.
Best time for 896K FFT length: 13.445 ms.
Best time for 1024K FFT length: 15.194 ms.
Best time for 1280K FFT length: 19.273 ms.
Best time for 1536K FFT length: 23.333 ms.
Best time for 1792K FFT length: 28.376 ms.
Best time for 2048K FFT length: 31.845 ms.
I dont know its probably not it.
anyway i wrote down the numbers from my probe since my computer conveniently froze with me being able to take my time and write it down Lulz!
v.core - 1.34v
+3.3 - 3.38v
+5 - 5.04v
+12 - 12.17v
cpu - 63c
Mb - 27c
cpu fan - 3341 Rpm
The last bit off stuff you advised me on i have to say i dont understand.
treat me like im stupid b/c i dont know any of this (first time) and just walk me through step by step..
Thanks yet again for taking your time with me!
I feel like i should take pictures of my BIOS settings or something it FEELS like its somethign wrong with how my graphic card (integrated) is working with my discrete card. I have never dealt with that before, should i set it to UMA+SIDE or something instead of off? also, i may have not uninstalled the old graphic card settings properly would that interfere if it was? if so how can i check?
Also the graphic card port arrangement i sent u, does that look like thats the correct order as well?
Sorry for a lot of into, thanks again