Overclock.net › Forums › Software, Programming and Coding › Operating Systems › Linux, Unix › Fedora 14: Jittery/Laggy Mouse
New Posts  All Forums:Forum Nav:

Fedora 14: Jittery/Laggy Mouse - Page 3

post #21 of 37
Thread Starter 
Here it is after I opened the paper tray (which began the lag) and then proceeded to print.

Code:
[    0.000000] Initializing cgroup subsys cpuset
[    0.000000] Initializing cgroup subsys cpu
[    0.000000] Linux version 2.6.35.11-83.fc14.x86_64 (mockbuild@x86-01.phx2.fedoraproject.org) (gcc version 4.5.1 20100924 (Red Hat 4.5.1-4) (GCC) ) #1 SMP Mon Feb 7 07:06:44 UTC 2011
[    0.000000] Command line: ro root=/dev/mapper/vg_livingroom-lv_root rd_LVM_LV=vg_livingroom/lv_root rd_LVM_LV=vg_livingroom/lv_swap rd_NO_LUKS rd_NO_MD rd_NO_DM LANG=en_US.UTF-8 SYSFONT=latarcyrheb-sun16 KEYTABLE=us rhgb quiet
[    0.000000] BIOS-provided physical RAM map:
[    0.000000]  BIOS-e820: 0000000000000000 - 000000000009f800 (usable)
[    0.000000]  BIOS-e820: 000000000009f800 - 00000000000a0000 (reserved)
[    0.000000]  BIOS-e820: 00000000000f0000 - 0000000000100000 (reserved)
[    0.000000]  BIOS-e820: 0000000000100000 - 0000000057ee0000 (usable)
[    0.000000]  BIOS-e820: 0000000057ee0000 - 0000000057ee3000 (ACPI NVS)
[    0.000000]  BIOS-e820: 0000000057ee3000 - 0000000057ef0000 (ACPI data)
[    0.000000]  BIOS-e820: 0000000057ef0000 - 0000000057f00000 (reserved)
[    0.000000]  BIOS-e820: 0000000058000000 - 0000000060000000 (reserved)
[    0.000000]  BIOS-e820: 00000000f0000000 - 00000000f4000000 (reserved)
[    0.000000]  BIOS-e820: 00000000fec00000 - 0000000100000000 (reserved)
[    0.000000] NX (Execute Disable) protection: active
[    0.000000] DMI 2.4 present.
[    0.000000] Phoenix BIOS detected: BIOS may corrupt low RAM, working around it.
[    0.000000] e820 update range: 0000000000000000 - 0000000000010000 (usable) ==> (reserved)
[    0.000000] e820 update range: 0000000000000000 - 0000000000001000 (usable) ==> (reserved)
[    0.000000] e820 remove range: 00000000000a0000 - 0000000000100000 (usable)
[    0.000000] No AGP bridge found
[    0.000000] last_pfn = 0x57ee0 max_arch_pfn = 0x400000000
[    0.000000] MTRR default type: uncachable
[    0.000000] MTRR fixed ranges enabled:
[    0.000000]   00000-9FFFF write-back
[    0.000000]   A0000-BFFFF uncachable
[    0.000000]   C0000-C7FFF write-protect
[    0.000000]   C8000-FFFFF uncachable
[    0.000000] MTRR variable ranges enabled:
[    0.000000]   0 base 0000000000 mask FFC0000000 write-back
[    0.000000]   1 base 0040000000 mask FFE0000000 write-back
[    0.000000]   2 disabled
[    0.000000]   3 disabled
[    0.000000]   4 disabled
[    0.000000]   5 disabled
[    0.000000]   6 disabled
[    0.000000]   7 disabled
[    0.000000] x86 PAT enabled: cpu 0, old 0x7040600070406, new 0x7010600070106
[    0.000000] initial memory mapped : 0 - 20000000
[    0.000000] found SMP MP-table at [ffff8800000f3ea0] f3ea0
[    0.000000] init_memory_mapping: 0000000000000000-0000000057ee0000
[    0.000000]  0000000000 - 0057e00000 page 2M
[    0.000000]  0057e00000 - 0057ee0000 page 4k
[    0.000000] kernel direct mapping tables up to 57ee0000 @ 16000-1a000
[    0.000000] RAMDISK: 37337000 - 37ff0000
[    0.000000] ACPI: RSDP 00000000000f7f10 00014 (v00 HPQOEM)
[    0.000000] ACPI: RSDT 0000000057ee3040 0003C (v01 HPQOEM SLIC-CPC 42302E31 NVDA 00000000)
[    0.000000] ACPI: FACP 0000000057ee30c0 00074 (v01 HPQOEM SLIC-CPC 42302E31 NVDA 00000000)
[    0.000000] ACPI Warning: Optional field Pm2ControlBlock has zero address or length: 0x0000000000000000/0x1 (20100428/tbfadt-557)
[    0.000000] ACPI: DSDT 0000000057ee3180 05B45 (v01 HPQOEM SLIC-CPC 00001000 MSFT 0100000E)
[    0.000000] ACPI: FACS 0000000057ee0000 00040
[    0.000000] ACPI: SSDT 0000000057ee8e00 000F4 (v01 PTLTD  POWERNOW 00000001  LTP 00000001)
[    0.000000] ACPI: HPET 0000000057ee8f40 00038 (v01 HPQOEM SLIC-CPC 42302E31 NVDA 00000098)
[    0.000000] ACPI: SLIC 0000000057ee8fc0 00176 (v01 HPQOEM SLIC-CPC 00000001 MSFT 00000001)
[    0.000000] ACPI: MCFG 0000000057ee9180 0003C (v01 HPQOEM SLIC-CPC 42302E31 NVDA 00000000)
[    0.000000] ACPI: APIC 0000000057ee8d40 0007C (v01 HPQOEM SLIC-CPC 42302E31 NVDA 00000000)
[    0.000000] ACPI: Local APIC address 0xfee00000
[    0.000000] Scanning NUMA topology in Northbridge 24
[    0.000000] No NUMA configuration found
[    0.000000] Faking a node at 0000000000000000-0000000057ee0000
[    0.000000] Initmem setup node 0 0000000000000000-0000000057ee0000
[    0.000000]   NODE_DATA [0000000001e44a00 - 0000000001e589ff]
[    0.000000]   bootmap [0000000001e59000 -  0000000001e63fdf] pages b
[    0.000000] (13/32 early reservations) ==> bootmem [0000000000 - 0057ee0000]
[    0.000000]   #0 [0001000000 - 0001e43878]    TEXT DATA BSS ==> [0001000000 - 0001e43878]
[    0.000000]   #1 [0037337000 - 0037ff0000]          RAMDISK ==> [0037337000 - 0037ff0000]
[    0.000000]   #2 [0001e44000 - 0001e449c8]              BRK ==> [0001e44000 - 0001e449c8]
[    0.000000]   #3 [00000f3eb0 - 0000100000]    BIOS reserved ==> [00000f3eb0 - 0000100000]
[    0.000000]   #4 [00000f3ea0 - 00000f3eb0]     MP-table mpf ==> [00000f3ea0 - 00000f3eb0]
[    0.000000]   #5 [000009f800 - 00000f2364]    BIOS reserved ==> [000009f800 - 00000f2364]
[    0.000000]   #6 [00000f249c - 00000f3ea0]    BIOS reserved ==> [00000f249c - 00000f3ea0]
[    0.000000]   #7 [00000f2364 - 00000f249c]     MP-table mpc ==> [00000f2364 - 00000f249c]
[    0.000000]   #8 [0000010000 - 0000012000]       TRAMPOLINE ==> [0000010000 - 0000012000]
[    0.000000]   #9 [0000012000 - 0000016000]      ACPI WAKEUP ==> [0000012000 - 0000016000]
[    0.000000]   #10 [0000016000 - 0000018000]          PGTABLE ==> [0000016000 - 0000018000]
[    0.000000]   #11 [0001e44a00 - 0001e58a00]        NODE_DATA ==> [0001e44a00 - 0001e58a00]
[    0.000000]   #12 [0001e59000 - 0001e64000]          BOOTMAP ==> [0001e59000 - 0001e64000]
[    0.000000]  [ffffea0000000000-ffffea00013fffff] PMD -> [ffff880002800000-ffff880003bfffff] on node 0
[    0.000000] Zone PFN ranges:
[    0.000000]   DMA      0x00000010 -> 0x00001000
[    0.000000]   DMA32    0x00001000 -> 0x00100000
[    0.000000]   Normal   empty
[    0.000000] Movable zone start PFN for each node
[    0.000000] early_node_map[2] active PFN ranges
[    0.000000]     0: 0x00000010 -> 0x0000009f
[    0.000000]     0: 0x00000100 -> 0x00057ee0
[    0.000000] On node 0 totalpages: 360047
[    0.000000]   DMA zone: 56 pages used for memmap
[    0.000000]   DMA zone: 103 pages reserved
[    0.000000]   DMA zone: 3824 pages, LIFO batch:0
[    0.000000]   DMA32 zone: 4869 pages used for memmap
[    0.000000]   DMA32 zone: 351195 pages, LIFO batch:31
[    0.000000] Detected use of extended apic ids on hypertransport bus
[    0.000000] ACPI: PM-Timer IO Port: 0x1008
[    0.000000] ACPI: Local APIC address 0xfee00000
[    0.000000] ACPI: LAPIC (acpi_id[0x00] lapic_id[0x00] enabled)
[    0.000000] ACPI: LAPIC (acpi_id[0x01] lapic_id[0x01] disabled)
[    0.000000] ACPI: LAPIC_NMI (acpi_id[0x00] high edge lint[0x1])
[    0.000000] ACPI: LAPIC_NMI (acpi_id[0x01] high edge lint[0x1])
[    0.000000] ACPI: IOAPIC (id[0x02] address[0xfec00000] gsi_base[0])
[    0.000000] IOAPIC[0]: apic_id 2, version 17, address 0xfec00000, GSI 0-23
[    0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 0 global_irq 2 dfl dfl)
[    0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 9 global_irq 9 high level)
[    0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 14 global_irq 14 high edge)
[    0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 15 global_irq 15 high edge)
[    0.000000] ACPI: IRQ0 used by override.
[    0.000000] ACPI: IRQ2 used by override.
[    0.000000] ACPI: IRQ9 used by override.
[    0.000000] ACPI: IRQ14 used by override.
[    0.000000] ACPI: IRQ15 used by override.
[    0.000000] Using ACPI (MADT) for SMP configuration information
[    0.000000] ACPI: HPET id: 0x10de8201 base: 0xfeff0000
[    0.000000] SMP: Allowing 2 CPUs, 1 hotplug CPUs
[    0.000000] nr_irqs_gsi: 40
[    0.000000] PM: Registered nosave memory: 000000000009f000 - 00000000000a0000
[    0.000000] PM: Registered nosave memory: 00000000000a0000 - 00000000000f0000
[    0.000000] PM: Registered nosave memory: 00000000000f0000 - 0000000000100000
[    0.000000] Allocating PCI resources starting at 60000000 (gap: 60000000:90000000)
[    0.000000] Booting paravirtualized kernel on bare hardware
[    0.000000] setup_percpu: NR_CPUS:256 nr_cpumask_bits:256 nr_cpu_ids:2 nr_node_ids:1
[    0.000000] PERCPU: Embedded 30 pages/cpu @ffff880002000000 s90496 r8192 d24192 u1048576
[    0.000000] pcpu-alloc: s90496 r8192 d24192 u1048576 alloc=1*2097152
[    0.000000] pcpu-alloc: [0] 0 1 
[    0.000000] Built 1 zonelists in Node order, mobility grouping on.  Total pages: 355019
[    0.000000] Policy zone: DMA32
[    0.000000] Kernel command line: ro root=/dev/mapper/vg_livingroom-lv_root rd_LVM_LV=vg_livingroom/lv_root rd_LVM_LV=vg_livingroom/lv_swap rd_NO_LUKS rd_NO_MD rd_NO_DM LANG=en_US.UTF-8 SYSFONT=latarcyrheb-sun16 KEYTABLE=us rhgb quiet
[    0.000000] PID hash table entries: 4096 (order: 3, 32768 bytes)
[    0.000000] Checking aperture...
[    0.000000] No AGP bridge found
[    0.000000] Node 0: aperture @ f3b6000000 size 32 MB
[    0.000000] Aperture beyond 4GB. Ignoring.
[    0.000000] Memory: 1391452k/1440640k available (4552k kernel code, 452k absent, 48736k reserved, 7257k data, 948k init)
[    0.000000] SLUB: Genslabs=14, HWalign=64, Order=0-3, MinObjects=0, CPUs=2, Nodes=1
[    0.000000] Hierarchical RCU implementation.
[    0.000000] RCU dyntick-idle grace-period acceleration is enabled.
[    0.000000] RCU-based detection of stalled CPUs is disabled.
[    0.000000] Verbose stalled-CPUs detection is disabled.
[    0.000000] NR_IRQS:16640 nr_irqs:512
[    0.000000] spurious 8259A interrupt: IRQ7.
[    0.000000] Console: colour VGA+ 80x25
[    0.000000] console [tty0] enabled
[    0.000000] allocated 14417920 bytes of page_cgroup
[    0.000000] please try 'cgroup_disable=memory' option if you don't want memory cgroups
[    0.000000] hpet clockevent registered
[    0.000000] Fast TSC calibration using PIT
[    0.000000] Detected 2009.264 MHz processor.
[    0.001011] Calibrating delay loop (skipped), value calculated using timer frequency.. 4018.52 BogoMIPS (lpj=2009264)
[    0.001016] pid_max: default: 32768 minimum: 301
[    0.001051] Security Framework initialized
[    0.001063] SELinux:  Initializing.
[    0.001075] SELinux:  Starting in permissive mode
[    0.001528] Dentry cache hash table entries: 262144 (order: 9, 2097152 bytes)
[    0.003699] Inode-cache hash table entries: 131072 (order: 8, 1048576 bytes)
[    0.004525] Mount-cache hash table entries: 256
[    0.004753] Initializing cgroup subsys ns
[    0.004759] Initializing cgroup subsys cpuacct
[    0.004766] Initializing cgroup subsys memory
[    0.004790] Initializing cgroup subsys devices
[    0.004794] Initializing cgroup subsys freezer
[    0.004797] Initializing cgroup subsys net_cls
[    0.004800] Initializing cgroup subsys blkio
[    0.004850] tseg: 0057f00000
[    0.004853] mce: CPU supports 5 MCE banks
[    0.004867] using C1E aware idle routine
[    0.004869] Performance Events: AMD PMU driver.
[    0.004876] ... version:                0
[    0.004878] ... bit width:              48
[    0.004880] ... generic registers:      4
[    0.004883] ... value mask:             0000ffffffffffff
[    0.004885] ... max period:             00007fffffffffff
[    0.004888] ... fixed-purpose events:   0
[    0.004890] ... event mask:             000000000000000f
[    0.004922] SMP alternatives: switching to UP code
[    0.008426] ACPI: Core revision 20100428
[    0.017009] ftrace: converting mcount calls to 0f 1f 44 00 00
[    0.017015] ftrace: allocating 23846 entries in 94 pages
[    0.020030] Setting APIC routing to flat
[    0.020507] ..TIMER: vector=0x30 apic1=0 pin1=2 apic2=-1 pin2=-1
[    0.030518] CPU0: AMD Athlon(tm) 64 Processor 3200+ stepping 02
[    0.030999] Brought up 1 CPUs
[    0.030999] Total of 1 processors activated (4018.52 BogoMIPS).
[    0.030999] sizeof(vma)=184 bytes
[    0.030999] sizeof(page)=56 bytes
[    0.030999] sizeof(inode)=584 bytes
[    0.030999] sizeof(dentry)=192 bytes
[    0.030999] sizeof(ext3inode)=800 bytes
[    0.030999] sizeof(buffer_head)=104 bytes
[    0.030999] sizeof(skbuff)=240 bytes
[    0.030999] sizeof(task_struct)=5944 bytes
[    0.030999] devtmpfs: initialized
[    0.037273] atomic64 test passed for x86-64 platform with CX8 and with SSE
[    0.037304] Time:  3:47:53  Date: 03/25/11
[    0.037354] NET: Registered protocol family 16
[    0.037492] node 0 link 0: io port [8000, ffff]
[    0.037496] TOM: 0000000060000000 aka 1536M
[    0.037499] node 0 link 0: mmio [a0000, bffff]
[    0.037503] node 0 link 0: mmio [60000000, efffffff]
[    0.037507] node 0 link 0: mmio [f4000000, fe02ffff]
[    0.037510] node 0 link 0: mmio [f0000000, f03fffff]
[    0.037513] bus: [00, 04] on node 0 link 0
[    0.037517] bus: 00 index 0 [io  0x0000-0xffff]
[    0.037520] bus: 00 index 1 [mem 0x000a0000-0x000bffff]
[    0.037523] bus: 00 index 2 [mem 0x60000000-0xf3ffffff]
[    0.037525] bus: 00 index 3 [mem 0xf4000000-0xfcffffffff]
[    0.037543] ACPI: bus type pci registered
[    0.037634] PCI: MMCONFIG for domain 0000 [bus 00-3f] at [mem 0xf0000000-0xf3ffffff] (base 0xf0000000)
[    0.037643] PCI: MMCONFIG at [mem 0xf0000000-0xf3ffffff] reserved in E820
[    0.043144] PCI: Using configuration type 1 for base access
[    0.044711] bio: create slab <bio-0> at 0
[    0.046145] ACPI: EC: Look up EC in DSDT
[    0.052118] ACPI: Interpreter enabled
[    0.052122] ACPI: (supports S0 S1 S3 S4 S5)
[    0.052155] ACPI: Using IOAPIC for interrupt routing
[    0.062735] ACPI: No dock devices found.
[    0.062741] PCI: Ignoring host bridge windows from ACPI; if necessary, use "pci=use_crs" and report a bug
[    0.063814] ACPI: PCI Root Bridge [PCI0] (domain 0000 [bus 00-04])
[    0.065905] pci_root PNP0A08:00: host bridge window [io  0x0000-0x03af] (ignored)
[    0.065909] pci_root PNP0A08:00: host bridge window [io  0x03e0-0x0cf7] (ignored)
[    0.065912] pci_root PNP0A08:00: host bridge window [io  0x8000-0xffff] (ignored)
[    0.065915] pci_root PNP0A08:00: host bridge window [io  0x03b0-0x03df] (ignored)
[    0.065918] pci_root PNP0A08:00: host bridge window [mem 0x000a0000-0x000bffff] (ignored)
[    0.065922] pci_root PNP0A08:00: host bridge window [mem 0x60000000-0xefffffff] (ignored)
[    0.065925] pci_root PNP0A08:00: host bridge window [mem 0xf4000000-0xfe02ffff] (ignored)
[    0.065928] pci_root PNP0A08:00: host bridge window [mem 0xfed40000-0xfed44fff] (ignored)
[    0.065931] pci_root PNP0A08:00: host bridge window [io  0x4700-0x470b] (ignored)
[    0.065934] pci_root PNP0A08:00: host bridge window [io  0x1c00-0x1c80] (ignored)
[    0.065938] pci_root PNP0A08:00: host bridge window [mem 0xfec80000-0xfecbffff] (ignored)
[    0.066126] pci 0000:00:01.1: reg 10: [io  0xfc00-0xfc3f]
[    0.066136] pci 0000:00:01.1: reg 20: [io  0x1c00-0x1c3f]
[    0.066141] pci 0000:00:01.1: reg 24: [io  0xf400-0xf43f]
[    0.066160] pci 0000:00:01.1: PME# supported from D3hot D3cold
[    0.066166] pci 0000:00:01.1: PME# disabled
[    0.066217] pci 0000:00:02.0: reg 10: [mem 0xfe02f000-0xfe02ffff]
[    0.066239] pci 0000:00:02.0: supports D1 D2
[    0.066241] pci 0000:00:02.0: PME# supported from D0 D1 D2 D3hot D3cold
[    0.066245] pci 0000:00:02.0: PME# disabled
[    0.066266] pci 0000:00:02.1: reg 10: [mem 0xfe02e000-0xfe02e0ff]
[    0.066292] pci 0000:00:02.1: supports D1 D2
[    0.066295] pci 0000:00:02.1: PME# supported from D0 D1 D2 D3hot D3cold
[    0.066298] pci 0000:00:02.1: PME# disabled
[    0.066359] pci 0000:00:05.0: reg 10: [mem 0xfe028000-0xfe02bfff]
[    0.066385] pci 0000:00:05.0: PME# supported from D3hot D3cold
[    0.066388] pci 0000:00:05.0: PME# disabled
[    0.066422] pci 0000:00:06.0: reg 20: [io  0xf000-0xf00f]
[    0.066458] pci 0000:00:07.0: reg 10: [mem 0xfe02d000-0xfe02dfff]
[    0.066462] pci 0000:00:07.0: reg 14: [io  0xec00-0xec07]
[    0.066484] pci 0000:00:07.0: supports D1 D2
[    0.066486] pci 0000:00:07.0: PME# supported from D0 D1 D2 D3hot D3cold
[    0.066491] pci 0000:00:07.0: PME# disabled
[    0.066512] pci 0000:00:08.0: reg 10: [io  0x09f0-0x09f7]
[    0.066516] pci 0000:00:08.0: reg 14: [io  0x0bf0-0x0bf3]
[    0.066519] pci 0000:00:08.0: reg 18: [io  0x0970-0x0977]
[    0.066523] pci 0000:00:08.0: reg 1c: [io  0x0b70-0x0b73]
[    0.066527] pci 0000:00:08.0: reg 20: [io  0xd800-0xd80f]
[    0.066531] pci 0000:00:08.0: reg 24: [mem 0xfe02c000-0xfe02cfff]
[    0.066579] pci 0000:00:09.0: PME# supported from D0 D1 D2 D3hot D3cold
[    0.066582] pci 0000:00:09.0: PME# disabled
[    0.066614] pci 0000:00:0b.0: PME# supported from D0 D1 D2 D3hot D3cold
[    0.066617] pci 0000:00:0b.0: PME# disabled
[    0.066648] pci 0000:00:0c.0: PME# supported from D0 D1 D2 D3hot D3cold
[    0.066651] pci 0000:00:0c.0: PME# disabled
[    0.066669] pci 0000:00:0d.0: reg 10: [mem 0xfb000000-0xfbffffff]
[    0.066674] pci 0000:00:0d.0: reg 14: [mem 0xe0000000-0xefffffff 64bit pref]
[    0.066680] pci 0000:00:0d.0: reg 1c: [mem 0xfc000000-0xfcffffff 64bit]
[    0.066685] pci 0000:00:0d.0: reg 30: [mem 0x00000000-0x0001ffff pref]
[    0.066784] PCI: peer root bus 00 res updated from pci conf
[    0.066822] pci 0000:01:05.0: reg 10: [io  0xcc00-0xcc07]
[    0.066828] pci 0000:01:05.0: reg 14: [io  0xc800-0xc807]
[    0.066834] pci 0000:01:05.0: reg 18: [io  0xc400-0xc407]
[    0.066840] pci 0000:01:05.0: reg 1c: [io  0xc000-0xc007]
[    0.066846] pci 0000:01:05.0: reg 20: [io  0xbc00-0xbc07]
[    0.066852] pci 0000:01:05.0: reg 24: [io  0xb800-0xb80f]
[    0.066882] pci 0000:01:06.0: reg 10: [mem 0xfdff0000-0xfdffffff]
[    0.066888] pci 0000:01:06.0: reg 14: [io  0xb400-0xb407]
[    0.066916] pci 0000:01:06.0: PME# supported from D3hot D3cold
[    0.066919] pci 0000:01:06.0: PME# disabled
[    0.066947] pci 0000:00:04.0: PCI bridge to [bus 01-01] (subtractive decode)
[    0.066951] pci 0000:00:04.0:   bridge window [io  0xb000-0xcfff]
[    0.066955] pci 0000:00:04.0:   bridge window [mem 0xfdf00000-0xfdffffff]
[    0.066958] pci 0000:00:04.0:   bridge window [mem 0xfd800000-0xfd8fffff pref]
[    0.066962] pci 0000:00:04.0:   bridge window [io  0x0000-0xffff] (subtractive decode)
[    0.066965] pci 0000:00:04.0:   bridge window [mem 0x000a0000-0x000bffff] (subtractive decode)
[    0.066969] pci 0000:00:04.0:   bridge window [mem 0x60000000-0xf3ffffff] (subtractive decode)
[    0.066972] pci 0000:00:04.0:   bridge window [mem 0xf4000000-0xfcffffffff] (subtractive decode)
[    0.066994] pci 0000:00:09.0: PCI bridge to [bus 02-02]
[    0.067003] pci 0000:00:09.0:   bridge window [io  0xa000-0xafff]
[    0.067006] pci 0000:00:09.0:   bridge window [mem 0xfde00000-0xfdefffff]
[    0.067011] pci 0000:00:09.0:   bridge window [mem 0xfdd00000-0xfddfffff 64bit pref]
[    0.067032] pci 0000:00:0b.0: PCI bridge to [bus 03-03]
[    0.067036] pci 0000:00:0b.0:   bridge window [io  0x9000-0x9fff]
[    0.067039] pci 0000:00:0b.0:   bridge window [mem 0xfdc00000-0xfdcfffff]
[    0.067043] pci 0000:00:0b.0:   bridge window [mem 0xfdb00000-0xfdbfffff 64bit pref]
[    0.067065] pci 0000:00:0c.0: PCI bridge to [bus 04-04]
[    0.067068] pci 0000:00:0c.0:   bridge window [io  0x8000-0x8fff]
[    0.067072] pci 0000:00:0c.0:   bridge window [mem 0xfda00000-0xfdafffff]
[    0.067076] pci 0000:00:0c.0:   bridge window [mem 0xfd900000-0xfd9fffff 64bit pref]
[    0.067089] ACPI: PCI Interrupt Routing Table [\\_SB_.PCI0._PRT]
[    0.067332] ACPI: PCI Interrupt Routing Table [\\_SB_.PCI0.HUB0._PRT]
[    0.117900] ACPI: PCI Interrupt Link [LNK1] (IRQs *5 7 9 10 11 14 15)
[    0.118066] ACPI: PCI Interrupt Link [LNK2] (IRQs 5 7 9 *10 11 14 15)
[    0.118222] ACPI: PCI Interrupt Link [LNK3] (IRQs 5 7 9 10 11 14 15) *0, disabled.
[    0.118379] ACPI: PCI Interrupt Link [LNK4] (IRQs 5 7 9 10 11 14 15) *0, disabled.
[    0.118534] ACPI: PCI Interrupt Link [LNK5] (IRQs 5 7 9 10 11 14 15) *0, disabled.
[    0.118691] ACPI: PCI Interrupt Link [LNK6] (IRQs 5 7 9 10 11 14 15) *0, disabled.
[    0.118846] ACPI: PCI Interrupt Link [LNK7] (IRQs 5 7 9 10 11 14 15) *0, disabled.
[    0.119008] ACPI: PCI Interrupt Link [LNK8] (IRQs 5 7 9 10 11 14 15) *0, disabled.
[    0.119167] ACPI: PCI Interrupt Link [LIGP] (IRQs 5 7 9 *10 11 14 15)
[    0.119322] ACPI: PCI Interrupt Link [LP2P] (IRQs 5 7 9 10 11 14 15) *0, disabled.
[    0.119480] ACPI: PCI Interrupt Link [LUBA] (IRQs 5 7 9 *10 11 14 15)
[    0.119647] ACPI: PCI Interrupt Link [LMAC] (IRQs 5 7 9 10 *11 14 15)
[    0.119809] ACPI: PCI Interrupt Link [LAZA] (IRQs *5 7 9 10 11 14 15)
[    0.119966] ACPI: PCI Interrupt Link [LPMU] (IRQs 5 7 9 10 11 14 15) *0, disabled.
[    0.120130] ACPI: PCI Interrupt Link [LSMB] (IRQs *5 7 9 10 11 14 15)
[    0.120293] ACPI: PCI Interrupt Link [LUB2] (IRQs 5 7 9 10 *11 14 15)
[    0.120450] ACPI: PCI Interrupt Link [LIDE] (IRQs 5 7 9 10 11 14 15) *0, disabled.
[    0.120608] ACPI: PCI Interrupt Link [LSID] (IRQs 5 7 9 10 *11 14 15)
[    0.120769] ACPI: PCI Interrupt Link [LFID] (IRQs 5 7 9 10 11 14 15) *0, disabled.
[    0.120982] ACPI: PCI Interrupt Link [APC1] (IRQs 16) *0
[    0.121193] ACPI: PCI Interrupt Link [APC2] (IRQs 17) *0
[    0.121398] ACPI: PCI Interrupt Link [APC3] (IRQs 18) *0, disabled.
[    0.121604] ACPI: PCI Interrupt Link [APC4] (IRQs 19) *0, disabled.
[    0.121810] ACPI: PCI Interrupt Link [APC5] (IRQs 16) *0, disabled.
[    0.122026] ACPI: PCI Interrupt Link [APC6] (IRQs 16) *0, disabled.
[    0.122232] ACPI: PCI Interrupt Link [APC7] (IRQs 16) *0, disabled.
[    0.122437] ACPI: PCI Interrupt Link [APC8] (IRQs 16) *0, disabled.
[    0.122642] ACPI: PCI Interrupt Link [AIGP] (IRQs 20 21 22 23) *0
[    0.122848] ACPI: PCI Interrupt Link [APCF] (IRQs 20 21 22 23) *0
[    0.123060] ACPI: PCI Interrupt Link [APCH] (IRQs 20 21 22 23) *0
[    0.123267] ACPI: PCI Interrupt Link [APMU] (IRQs 20 21 22 23) *0, disabled.
[    0.123474] ACPI: PCI Interrupt Link [AAZA] (IRQs 20 21 22 23) *0
[    0.123680] ACPI: PCI Interrupt Link [APCS] (IRQs 20 21 22 23) *0
[    0.123886] ACPI: PCI Interrupt Link [APCL] (IRQs 20 21 22 23) *0
[    0.124098] ACPI: PCI Interrupt Link [APCM] (IRQs 20 21 22 23) *0, disabled.
[    0.124305] ACPI: PCI Interrupt Link [APCZ] (IRQs 20 21 22 23) *0, disabled.
[    0.124511] ACPI: PCI Interrupt Link [APSI] (IRQs 20 21 22 23) *0
[    0.124718] ACPI: PCI Interrupt Link [APSJ] (IRQs 20 21 22 23) *0, disabled.
[    0.124771] HEST: Table is not found!
[    0.124879] vgaarb: device added: PCI:0000:00:0d.0,decodes=io+mem,owns=io+mem,locks=none
[    0.124885] vgaarb: loaded
[    0.125011] SCSI subsystem initialized
[    0.125105] libata version 3.00 loaded.
[    0.125194] usbcore: registered new interface driver usbfs
[    0.125215] usbcore: registered new interface driver hub
[    0.125250] usbcore: registered new device driver usb
[    0.125347] PCI: Using ACPI for IRQ routing
[    0.125352] PCI: pci_cache_line_size set to 64 bytes
[    0.125420] reserve RAM buffer: 000000000009f800 - 000000000009ffff 
[    0.125424] reserve RAM buffer: 0000000057ee0000 - 0000000057ffffff 
[    0.125552] NetLabel: Initializing
[    0.125554] NetLabel:  domain hash size = 128
[    0.125556] NetLabel:  protocols = UNLABELED CIPSOv4
[    0.125572] NetLabel:  unlabeled traffic allowed by default
[    0.125654] HPET: 3 timers in total, 0 timers will be used for per-cpu timer
[    0.125661] hpet0: at MMIO 0xfeff0000, IRQs 2, 8, 31
[    0.125669] hpet0: 3 comparators, 32-bit 25.000000 MHz counter
[    0.128043] Switching to clocksource hpet
[    0.143908] pnp: PnP ACPI init
[    0.143932] ACPI: bus type pnp registered
[    0.145184] pnp 00:00: [bus 00-04]
[    0.145188] pnp 00:00: [io  0x0cf8-0x0cff]
[    0.145191] pnp 00:00: [io  0x0000-0x03af window]
[    0.145194] pnp 00:00: [io  0x03e0-0x0cf7 window]
[    0.145196] pnp 00:00: [io  0x8000-0xffff window]
[    0.145199] pnp 00:00: [io  0x03b0-0x03df window]
[    0.145202] pnp 00:00: [mem 0x000a0000-0x000bffff window]
[    0.145205] pnp 00:00: [mem 0x60000000-0xefffffff window]
[    0.145208] pnp 00:00: [mem 0xf4000000-0xfe02ffff window]
[    0.145211] pnp 00:00: [mem 0xfed40000-0xfed44fff window]
[    0.145214] pnp 00:00: [io  0x4700-0x470b window]
[    0.145216] pnp 00:00: [io  0x1c00-0x1c80 window]
[    0.145219] pnp 00:00: [mem 0xfec80000-0xfecbffff window]
[    0.145300] pnp 00:00: Plug and Play ACPI device, IDs PNP0a08 PNP0a03 (active)
[    0.145524] pnp 00:01: [io  0x1000-0x107f]
[    0.145527] pnp 00:01: [io  0x1080-0x10ff]
[    0.145530] pnp 00:01: [io  0x1400-0x147f]
[    0.145532] pnp 00:01: [io  0x1480-0x14ff]
[    0.145535] pnp 00:01: [io  0x1800-0x187f]
[    0.145537] pnp 00:01: [io  0x1880-0x18ff]
[    0.145540] pnp 00:01: [mem 0x00000000-0xffffffffffffffff disabled]
[    0.145543] pnp 00:01: [mem 0xfefe0000-0xfefe01ff]
[    0.145546] pnp 00:01: [mem 0xfefe1000-0xfefe10ff]
[    0.145549] pnp 00:01: [mem 0x58000000-0x5fffffff]
[    0.145552] pnp 00:01: [io  0x2000-0x207f]
[    0.145554] pnp 00:01: [io  0x2080-0x20ff]
[    0.145623] pnp 00:01: Plug and Play ACPI device, IDs PNP0c02 (active)
[    0.145734] pnp 00:02: [io  0x0010-0x001f]
[    0.145736] pnp 00:02: [io  0x0022-0x003f]
[    0.145739] pnp 00:02: [io  0x0044-0x004d]
[    0.145741] pnp 00:02: [io  0x0050-0x005e]
[    0.145744] pnp 00:02: [io  0x0062-0x0063]
[    0.145746] pnp 00:02: [io  0x0065-0x006f]
[    0.145749] pnp 00:02: [io  0x0074-0x007f]
[    0.145751] pnp 00:02: [io  0x0091-0x0093]
[    0.145754] pnp 00:02: [io  0x00a2-0x00bf]
[    0.145756] pnp 00:02: [io  0x00e0-0x00ef]
[    0.145759] pnp 00:02: [io  0x04d0-0x04d1]
[    0.145766] pnp 00:02: [io  0x0800-0x087f]
[    0.145769] pnp 00:02: [io  0x0290-0x0297]
[    0.145831] pnp 00:02: Plug and Play ACPI device, IDs PNP0c02 (active)
[    0.145848] pnp 00:03: [dma 4]
[    0.145851] pnp 00:03: [io  0x0000-0x000f]
[    0.145854] pnp 00:03: [io  0x0080-0x0090]
[    0.145856] pnp 00:03: [io  0x0094-0x009f]
[    0.145859] pnp 00:03: [io  0x00c0-0x00df]
[    0.145892] pnp 00:03: Plug and Play ACPI device, IDs PNP0200 (active)
[    0.146030] pnp 00:04: [irq 0 disabled]
[    0.146046] pnp 00:04: [irq 8]
[    0.146049] pnp 00:04: [mem 0xfeff0000-0xfeff03ff]
[    0.146085] pnp 00:04: Plug and Play ACPI device, IDs PNP0103 (active)
[    0.146158] pnp 00:05: [io  0x0070-0x0073]
[    0.146196] pnp 00:05: Plug and Play ACPI device, IDs PNP0b00 (active)
[    0.146210] pnp 00:06: [io  0x0061]
[    0.146246] pnp 00:06: Plug and Play ACPI device, IDs PNP0800 (active)
[    0.146260] pnp 00:07: [io  0x00f0-0x00ff]
[    0.146269] pnp 00:07: [irq 13]
[    0.146305] pnp 00:07: Plug and Play ACPI device, IDs PNP0c04 (active)
[    0.146840] pnp 00:08: [irq 12]
[    0.146879] pnp 00:08: Plug and Play ACPI device, IDs PNP0f13 (active)
[    0.146938] pnp 00:09: [io  0x0060]
[    0.146941] pnp 00:09: [io  0x0064]
[    0.146949] pnp 00:09: [irq 1]
[    0.146988] pnp 00:09: Plug and Play ACPI device, IDs PNP0303 PNP030b (active)
[    0.148951] pnp 00:0a: [mem 0xf0000000-0xf3ffffff]
[    0.149030] pnp 00:0a: Plug and Play ACPI device, IDs PNP0c02 (active)
[    0.149228] pnp 00:0b: [mem 0x000f0000-0x000fffff]
[    0.149231] pnp 00:0b: [mem 0xfeff0000-0xfeff00ff]
[    0.149234] pnp 00:0b: [mem 0x57ee0000-0x57efffff]
[    0.149237] pnp 00:0b: [mem 0xffff0000-0xffffffff]
[    0.149239] pnp 00:0b: [mem 0x00000000-0x0009ffff]
[    0.149242] pnp 00:0b: [mem 0x00100000-0x57edffff]
[    0.149245] pnp 00:0b: [mem 0x57f00000-0x5fefffff]
[    0.149248] pnp 00:0b: [mem 0xfec00000-0xfec00fff]
[    0.149250] pnp 00:0b: [mem 0xfee00000-0xfeefffff]
[    0.149253] pnp 00:0b: [mem 0xfefff000-0xfeffffff]
[    0.149256] pnp 00:0b: [mem 0xfff80000-0xfff80fff]
[    0.149259] pnp 00:0b: [mem 0xfff90000-0xfffbffff]
[    0.149261] pnp 00:0b: [mem 0xfffed000-0xfffeffff]
[    0.149341] pnp 00:0b: Plug and Play ACPI device, IDs PNP0c01 (active)
[    0.149393] pnp: PnP ACPI: found 12 devices
[    0.149395] ACPI: ACPI bus type pnp unregistered
[    0.149409] system 00:01: [io  0x1000-0x107f] has been reserved
[    0.149413] system 00:01: [io  0x1080-0x10ff] has been reserved
[    0.149416] system 00:01: [io  0x1400-0x147f] has been reserved
[    0.149420] system 00:01: [io  0x1480-0x14ff] has been reserved
[    0.149423] system 00:01: [io  0x1800-0x187f] has been reserved
[    0.149427] system 00:01: [io  0x1880-0x18ff] has been reserved
[    0.149430] system 00:01: [io  0x2000-0x207f] has been reserved
[    0.149434] system 00:01: [io  0x2080-0x20ff] has been reserved
[    0.149438] system 00:01: [mem 0xfefe0000-0xfefe01ff] has been reserved
[    0.149442] system 00:01: [mem 0xfefe1000-0xfefe10ff] has been reserved
[    0.149446] system 00:01: [mem 0x58000000-0x5fffffff] has been reserved
[    0.149453] system 00:02: [io  0x04d0-0x04d1] has been reserved
[    0.149457] system 00:02: [io  0x0800-0x087f] has been reserved
[    0.149465] system 00:02: [io  0x0290-0x0297] has been reserved
[    0.149473] system 00:0a: [mem 0xf0000000-0xf3ffffff] has been reserved
[    0.149479] system 00:0b: [mem 0x000f0000-0x000fffff] could not be reserved
[    0.149483] system 00:0b: [mem 0xfeff0000-0xfeff00ff] has been reserved
[    0.149487] system 00:0b: [mem 0x57ee0000-0x57efffff] could not be reserved
[    0.149491] system 00:0b: [mem 0xffff0000-0xffffffff] has been reserved
[    0.149494] system 00:0b: [mem 0x00000000-0x0009ffff] could not be reserved
[    0.149498] system 00:0b: [mem 0x00100000-0x57edffff] could not be reserved
[    0.149502] system 00:0b: [mem 0x57f00000-0x5fefffff] could not be reserved
[    0.149506] system 00:0b: [mem 0xfec00000-0xfec00fff] could not be reserved
[    0.149510] system 00:0b: [mem 0xfee00000-0xfeefffff] has been reserved
[    0.149513] system 00:0b: [mem 0xfefff000-0xfeffffff] has been reserved
[    0.149517] system 00:0b: [mem 0xfff80000-0xfff80fff] has been reserved
[    0.149521] system 00:0b: [mem 0xfff90000-0xfffbffff] has been reserved
[    0.149525] system 00:0b: [mem 0xfffed000-0xfffeffff] has been reserved
[    0.156501] pci 0000:00:0d.0: BAR 6: assigned [mem 0x60000000-0x6001ffff pref]
[    0.156508] pci 0000:00:04.0: PCI bridge to [bus 01-01]
[    0.156514] pci 0000:00:04.0:   bridge window [io  0xb000-0xcfff]
[    0.156521] pci 0000:00:04.0:   bridge window [mem 0xfdf00000-0xfdffffff]
[    0.156528] pci 0000:00:04.0:   bridge window [mem 0xfd800000-0xfd8fffff pref]
[    0.156536] pci 0000:00:09.0: PCI bridge to [bus 02-02]
[    0.156541] pci 0000:00:09.0:   bridge window [io  0xa000-0xafff]
[    0.156547] pci 0000:00:09.0:   bridge window [mem 0xfde00000-0xfdefffff]
[    0.156554] pci 0000:00:09.0:   bridge window [mem 0xfdd00000-0xfddfffff 64bit pref]
[    0.156561] pci 0000:00:0b.0: PCI bridge to [bus 03-03]
[    0.156567] pci 0000:00:0b.0:   bridge window [io  0x9000-0x9fff]
[    0.156573] pci 0000:00:0b.0:   bridge window [mem 0xfdc00000-0xfdcfffff]
[    0.156580] pci 0000:00:0b.0:   bridge window [mem 0xfdb00000-0xfdbfffff 64bit pref]
[    0.156587] pci 0000:00:0c.0: PCI bridge to [bus 04-04]
[    0.156593] pci 0000:00:0c.0:   bridge window [io  0x8000-0x8fff]
[    0.156599] pci 0000:00:0c.0:   bridge window [mem 0xfda00000-0xfdafffff]
[    0.156606] pci 0000:00:0c.0:   bridge window [mem 0xfd900000-0xfd9fffff 64bit pref]
[    0.156619] pci 0000:00:04.0: setting latency timer to 64
[    0.156626] pci 0000:00:09.0: setting latency timer to 64
[    0.156631] pci 0000:00:0b.0: setting latency timer to 64
[    0.156637] pci 0000:00:0c.0: setting latency timer to 64
[    0.156641] pci_bus 0000:00: resource 4 [io  0x0000-0xffff]
[    0.156645] pci_bus 0000:00: resource 5 [mem 0x000a0000-0x000bffff]
[    0.156648] pci_bus 0000:00: resource 6 [mem 0x60000000-0xf3ffffff]
[    0.156651] pci_bus 0000:00: resource 7 [mem 0xf4000000-0xfcffffffff]
[    0.156655] pci_bus 0000:01: resource 0 [io  0xb000-0xcfff]
[    0.156657] pci_bus 0000:01: resource 1 [mem 0xfdf00000-0xfdffffff]
[    0.156661] pci_bus 0000:01: resource 2 [mem 0xfd800000-0xfd8fffff pref]
[    0.156664] pci_bus 0000:01: resource 4 [io  0x0000-0xffff]
[    0.156667] pci_bus 0000:01: resource 5 [mem 0x000a0000-0x000bffff]
[    0.156670] pci_bus 0000:01: resource 6 [mem 0x60000000-0xf3ffffff]
[    0.156673] pci_bus 0000:01: resource 7 [mem 0xf4000000-0xfcffffffff]
[    0.156676] pci_bus 0000:02: resource 0 [io  0xa000-0xafff]
[    0.156679] pci_bus 0000:02: resource 1 [mem 0xfde00000-0xfdefffff]
[    0.156682] pci_bus 0000:02: resource 2 [mem 0xfdd00000-0xfddfffff 64bit pref]
[    0.156686] pci_bus 0000:03: resource 0 [io  0x9000-0x9fff]
[    0.156689] pci_bus 0000:03: resource 1 [mem 0xfdc00000-0xfdcfffff]
[    0.156692] pci_bus 0000:03: resource 2 [mem 0xfdb00000-0xfdbfffff 64bit pref]
[    0.156695] pci_bus 0000:04: resource 0 [io  0x8000-0x8fff]
[    0.156698] pci_bus 0000:04: resource 1 [mem 0xfda00000-0xfdafffff]
[    0.156701] pci_bus 0000:04: resource 2 [mem 0xfd900000-0xfd9fffff 64bit pref]
[    0.156743] NET: Registered protocol family 2
[    0.156868] IP route cache hash table entries: 65536 (order: 7, 524288 bytes)
[    0.158039] TCP established hash table entries: 262144 (order: 10, 4194304 bytes)
[    0.161207] TCP bind hash table entries: 65536 (order: 8, 1048576 bytes)
[    0.161960] TCP: Hash tables configured (established 262144 bind 65536)
[    0.161963] TCP reno registered
[    0.161982] UDP hash table entries: 1024 (order: 3, 32768 bytes)
[    0.162032] UDP-Lite hash table entries: 1024 (order: 3, 32768 bytes)
[    0.162168] NET: Registered protocol family 1
[    0.174838] pci 0000:00:00.0: Found enabled HT MSI Mapping
[    0.174889] pci 0000:00:00.0: Found enabled HT MSI Mapping
[    0.174950] pci 0000:00:00.0: Found enabled HT MSI Mapping
[    0.175017] pci 0000:00:00.0: Found enabled HT MSI Mapping
[    0.175080] pci 0000:00:00.0: Found enabled HT MSI Mapping
[    0.175147] pci 0000:00:00.0: Found enabled HT MSI Mapping
[    0.175218] pci 0000:00:00.0: Found enabled HT MSI Mapping
[    0.175228] pci 0000:00:0d.0: Boot video device
[    0.175246] PCI: CLS 64 bytes, default 64
[    0.175333] Trying to unpack rootfs image as initramfs...
[    0.582040] Freeing initrd memory: 13028k freed
[    0.592906] audit: initializing netlink socket (disabled)
[    0.592927] type=2000 audit(1301024873.591:1): initialized
[    0.607982] HugeTLB registered 2 MB page size, pre-allocated 0 pages
[    0.610166] VFS: Disk quotas dquot_6.5.2
[    0.610225] Dquot-cache hash table entries: 512 (order 0, 4096 bytes)
[    0.610869] msgmni has been set to 2743
[    0.610954] SELinux:  Registering netfilter hooks
[    0.611374] alg: No test for stdrng (krng)
[    0.611456] Block layer SCSI generic (bsg) driver version 0.4 loaded (major 253)
[    0.611460] io scheduler noop registered
[    0.611462] io scheduler deadline registered
[    0.611521] io scheduler cfq registered (default)
[    0.611776] pcieport 0000:00:09.0: setting latency timer to 64
[    0.611794]   alloc irq_desc for 40 on node 0
[    0.611797]   alloc kstat_irqs on node 0
[    0.611809] pcieport 0000:00:09.0: irq 40 for MSI/MSI-X
[    0.611904] pcieport 0000:00:0b.0: setting latency timer to 64
[    0.611919]   alloc irq_desc for 41 on node 0
[    0.611921]   alloc kstat_irqs on node 0
[    0.611927] pcieport 0000:00:0b.0: irq 41 for MSI/MSI-X
[    0.612042] pcieport 0000:00:0c.0: setting latency timer to 64
[    0.612057]   alloc irq_desc for 42 on node 0
[    0.612059]   alloc kstat_irqs on node 0
[    0.612064] pcieport 0000:00:0c.0: irq 42 for MSI/MSI-X
[    0.612152] pci_hotplug: PCI Hot Plug PCI Core version: 0.5
[    0.612184] pciehp: PCI Express Hot Plug Controller Driver version: 0.4
[    0.612187] acpiphp: ACPI Hot Plug PCI Controller Driver version: 0.5
[    0.612693] pci-stub: invalid id string ""
[    0.612922] input: Power Button as /devices/LNXSYSTM:00/LNXSYBUS:00/PNP0C0C:00/input/input0
[    0.612928] ACPI: Power Button [PWRB]
[    0.613044] input: Power Button as /devices/LNXSYSTM:00/LNXPWRBN:00/input/input1
[    0.613048] ACPI: Power Button [PWRF]
[    0.613121] ACPI: Fan [FAN] (on)
[    0.613507] ACPI: acpi_idle registered with cpuidle
[    0.618525] thermal LNXTHERM:01: registered as thermal_zone0
[    0.618535] ACPI: Thermal Zone [THRM] (40 C)
[    0.618552] ERST: Table is not found!
[    0.619025] Non-volatile memory driver v1.3
[    0.619029] Linux agpgart interface v0.103
[    0.619105] Serial: 8250/16550 driver, 4 ports, IRQ sharing enabled
[    0.621117] brd: module loaded
[    0.621946] loop: module loaded
[    0.622184] Fixed MDIO Bus: probed
[    0.622260] ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver
[    0.622746] ACPI: PCI Interrupt Link [APCL] enabled at IRQ 23
[    0.622752]   alloc irq_desc for 23 on node 0
[    0.622755]   alloc kstat_irqs on node 0
[    0.622769] ehci_hcd 0000:00:02.1: PCI INT B -> Link[APCL] -> GSI 23 (level, low) -> IRQ 23
[    0.622795] ehci_hcd 0000:00:02.1: setting latency timer to 64
[    0.622799] ehci_hcd 0000:00:02.1: EHCI Host Controller
[    0.622883] ehci_hcd 0000:00:02.1: new USB bus registered, assigned bus number 1
[    0.622919] ehci_hcd 0000:00:02.1: debug port 1
[    0.622927] ehci_hcd 0000:00:02.1: cache line size of 64 is not supported
[    0.622960] ehci_hcd 0000:00:02.1: irq 23, io mem 0xfe02e000
[    0.628020] ehci_hcd 0000:00:02.1: USB 2.0 started, EHCI 1.00
[    0.628060] usb usb1: New USB device found, idVendor=1d6b, idProduct=0002
[    0.628063] usb usb1: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[    0.628066] usb usb1: Product: EHCI Host Controller
[    0.628069] usb usb1: Manufacturer: Linux 2.6.35.11-83.fc14.x86_64 ehci_hcd
[    0.628072] usb usb1: SerialNumber: 0000:00:02.1
[    0.628215] hub 1-0:1.0: USB hub found
[    0.628222] hub 1-0:1.0: 10 ports detected
[    0.628347] ohci_hcd: USB 1.1 'Open' Host Controller (OHCI) Driver
[    0.628763] ACPI: PCI Interrupt Link [APCF] enabled at IRQ 22
[    0.628767]   alloc irq_desc for 22 on node 0
[    0.628770]   alloc kstat_irqs on node 0
[    0.628780] ohci_hcd 0000:00:02.0: PCI INT A -> Link[APCF] -> GSI 22 (level, low) -> IRQ 22
[    0.628800] ohci_hcd 0000:00:02.0: setting latency timer to 64
[    0.628803] ohci_hcd 0000:00:02.0: OHCI Host Controller
[    0.628862] ohci_hcd 0000:00:02.0: new USB bus registered, assigned bus number 2
[    0.628902] ohci_hcd 0000:00:02.0: irq 22, io mem 0xfe02f000
[    0.681047] usb usb2: New USB device found, idVendor=1d6b, idProduct=0001
[    0.681051] usb usb2: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[    0.681053] usb usb2: Product: OHCI Host Controller
[    0.681056] usb usb2: Manufacturer: Linux 2.6.35.11-83.fc14.x86_64 ohci_hcd
[    0.681059] usb usb2: SerialNumber: 0000:00:02.0
[    0.681182] hub 2-0:1.0: USB hub found
[    0.681189] hub 2-0:1.0: 10 ports detected
[    0.681297] uhci_hcd: USB Universal Host Controller Interface driver
[    0.681408] PNP: PS/2 Controller [PNP0303:PS2K,PNP0f13:PS2M] at 0x60,0x64 irq 1,12
[    0.681849] serio: i8042 KBD port at 0x60,0x64 irq 1
[    0.681856] serio: i8042 AUX port at 0x60,0x64 irq 12
[    0.681919] mice: PS/2 mouse device common for all mice
[    0.682172] rtc_cmos 00:05: RTC can wake from S4
[    0.682237] rtc_cmos 00:05: rtc core: registered rtc_cmos as rtc0
[    0.682281] rtc0: alarms up to one year, y3k, 242 bytes nvram, hpet irqs
[    0.682374] device-mapper: uevent: version 1.0.3
[    0.682512] device-mapper: ioctl: 4.19.1-ioctl (2010-10-12) initialised: dm-devel@redhat.com
[    0.682612] cpuidle: using governor ladder
[    0.682615] cpuidle: using governor menu
[    0.682910] usbcore: registered new interface driver hiddev
[    0.682938] usbcore: registered new interface driver usbhid
[    0.682940] usbhid: USB HID core driver
[    0.682971] nf_conntrack version 0.5.0 (16384 buckets, 65536 max)
[    0.683194] CONFIG_NF_CT_ACCT is deprecated and will be removed soon. Please use
[    0.683201] nf_conntrack.acct=1 kernel parameter, acct=1 nf_conntrack module option or
[    0.683207] sysctl net.netfilter.nf_conntrack_acct=1 to enable it.
[    0.683297] ip_tables: (C) 2000-2006 Netfilter Core Team
[    0.683314] TCP cubic registered
[    0.683316] Initializing XFRM netlink socket
[    0.683337] NET: Registered protocol family 17
[    0.683519] PM: Resume from disk failed.
[    0.683536] registered taskstats version 1
[    0.683774]   Magic number: 3:411:766
[    0.683893] rtc_cmos 00:05: setting system clock to 2011-03-25 03:47:54 UTC (1301024874)
[    0.683937] Initalizing network drop monitor service
[    0.684037] Freeing unused kernel memory: 948k freed
[    0.684654] Write protecting the kernel read-only data: 10240k
[    0.684995] Freeing unused kernel memory: 1572k freed
[    0.686363] Freeing unused kernel memory: 1836k freed
[    0.701185] input: AT Translated Set 2 keyboard as /devices/platform/i8042/serio0/input/input2
[    0.708685] dracut: dracut-006-6.fc14
[    0.716538] dracut: rd_NO_LUKS: removing cryptoluks activation
[    0.731170] udev[90]: starting version 161
[    0.833625] [drm] Initialized drm 1.1.0 20060810
[    0.874994] ACPI: PCI Interrupt Link [AIGP] enabled at IRQ 21
[    0.875022]   alloc irq_desc for 21 on node 0
[    0.875025]   alloc kstat_irqs on node 0
[    0.875039] nouveau 0000:00:0d.0: PCI INT A -> Link[AIGP] -> GSI 21 (level, low) -> IRQ 21
[    0.875044] nouveau 0000:00:0d.0: setting latency timer to 64
[    0.880412] [drm] nouveau 0000:00:0d.0: Detected an NV40 generation card (0x04c000a2)
[    0.882729] [drm] nouveau 0000:00:0d.0: Attempting to load BIOS image from PRAMIN
[    0.921464] [drm] nouveau 0000:00:0d.0: ... appears to be valid
[    0.921469] [drm] nouveau 0000:00:0d.0: BIT BIOS found
[    0.921473] [drm] nouveau 0000:00:0d.0: Bios version 05.61.32.20
[    0.921477] [drm] nouveau 0000:00:0d.0: TMDS table version 1.1
[    0.921480] [drm] nouveau 0000:00:0d.0: BIT table 'd' not found
[    0.921483] [drm] nouveau 0000:00:0d.0: Found Display Configuration Block version 3.0
[    0.921488] [drm] nouveau 0000:00:0d.0: Raw DCB entry 0: 01000310 00000023
[    0.921491] [drm] nouveau 0000:00:0d.0: Raw DCB entry 1: 00110204 97dd0000
[    0.921495] [drm] nouveau 0000:00:0d.0: DCB connector table: VHER 0x30 5 10 2
[    0.921499] [drm] nouveau 0000:00:0d.0:   0: 0x00000000: type 0x00 idx 0 tag 0xff
[    0.921506] [drm] nouveau 0000:00:0d.0: Parsing VBIOS init table 0 at offset 0xDCAA
[    0.921511] [drm] nouveau 0000:00:0d.0: ======= misaligned reg 0x0060081D =======
[    0.921547] [drm] nouveau 0000:00:0d.0: ======= misaligned reg 0x0060081D =======
[    0.921638] [drm] nouveau 0000:00:0d.0: Parsing VBIOS init table 1 at offset 0xDE01
[    0.921642] [drm] nouveau 0000:00:0d.0: Parsing VBIOS init table 2 at offset 0xDE02
[    0.921708] [drm] nouveau 0000:00:0d.0: Parsing VBIOS init table 3 at offset 0xDF84
[    0.921714] [drm] nouveau 0000:00:0d.0: Parsing VBIOS init table 4 at offset 0xDFCD
[    0.921719] [drm] nouveau 0000:00:0d.0: Detected 128MiB VRAM
[    0.922171] [TTM] Zone  kernel: Available graphics memory: 704418 kiB.
[    0.922174] [TTM] Initializing pool allocator.
[    0.923143] [drm] nouveau 0000:00:0d.0: 64 MiB GART (aperture)
[    0.923200] [drm] nouveau 0000:00:0d.0: Saving VGA fonts
[    0.958960] [drm] nouveau 0000:00:0d.0: unknown connector type: 0xff!!
[    0.959819] [drm] nouveau 0000:00:0d.0: Allocating FIFO number 0
[    0.960057] [drm] nouveau 0000:00:0d.0: nouveau_channel_alloc: initialised FIFO 0
[    0.960068] [drm] nouveau 0000:00:0d.0: Setting dpms mode 3 on vga encoder (output 0)
[    1.000943] usb 1-6: new high speed USB device using ehci_hcd and address 2
[    1.086796] [drm] nouveau 0000:00:0d.0: allocated 1024x768 fb: 0x48000, bo ffff880037cc7c00
[    1.086981] fbcon: nouveaufb (fb0) is primary device
[    1.117114] usb 1-6: New USB device found, idVendor=04a9, idProduct=170a
[    1.117117] usb 1-6: New USB device strings: Mfr=1, Product=2, SerialNumber=3
[    1.117120] usb 1-6: Product: MP170
[    1.117122] usb 1-6: Manufacturer: Canon
[    1.117124] usb 1-6: SerialNumber: 901C7F
[    1.131889] Initializing USB Mass Storage driver...
[    1.132036] scsi0 : usb-storage 1-6:1.2
[    1.132238] usbcore: registered new interface driver usb-storage
[    1.132241] USB Mass Storage support registered.
[    1.152385] [drm] nouveau 0000:00:0d.0: Setting dpms mode 0 on vga encoder (output 0)
[    1.152390] [drm] nouveau 0000:00:0d.0: Output VGA-1 is running on CRTC 0 using output A
[    1.153126] Console: switching to colour frame buffer device 128x48
[    1.153971] fb0: nouveaufb frame buffer device
[    1.153974] drm: registered panic notifier
[    1.153979] Slow work thread pool: Starting up
[    1.154075] Slow work thread pool: Ready
[    1.154083] [drm] Initialized nouveau 0.0.16 20090420 for 0000:00:0d.0 on minor 0
[    1.185856] dracut: Starting plymouth daemon
[    1.382121] dracut: rd_NO_DM: removing DM RAID activation
[    1.393040] dracut: rd_NO_MD: removing MD RAID activation
[    1.494158] input: ImPS/2 Generic Wheel Mouse as /devices/platform/i8042/serio1/input/input3
[    1.564115] pata_amd 0000:00:06.0: version 0.4.1
[    1.564175] pata_amd 0000:00:06.0: setting latency timer to 64
[    1.589141] scsi1 : pata_amd
[    1.637088] scsi2 : pata_amd
[    1.638210] ata1: PATA max UDMA/133 cmd 0x1f0 ctl 0x3f6 bmdma 0xf000 irq 14
[    1.638214] ata2: PATA max UDMA/133 cmd 0x170 ctl 0x376 bmdma 0xf008 irq 15
[    1.703366] sata_nv 0000:00:08.0: version 3.5
[    1.703787] ACPI: PCI Interrupt Link [APSI] enabled at IRQ 20
[    1.703794]   alloc irq_desc for 20 on node 0
[    1.703796]   alloc kstat_irqs on node 0
[    1.703810] sata_nv 0000:00:08.0: PCI INT A -> Link[APSI] -> GSI 20 (level, low) -> IRQ 20
[    1.703873] sata_nv 0000:00:08.0: setting latency timer to 64
[    1.739151] scsi3 : sata_nv
[    1.758309] scsi4 : sata_nv
[    1.758591] ata3: SATA max UDMA/133 cmd 0x9f0 ctl 0xbf0 bmdma 0xd800 irq 20
[    1.758595] ata4: SATA max UDMA/133 cmd 0x970 ctl 0xb70 bmdma 0xd808 irq 20
[    1.864289] ata1.00: ATAPI: SONY    DVD RW DRU-720A, JY08, max UDMA/66
[    1.864484] ata1.01: ATA-7: HDS728080PLAT20, PF2OA2AA, max UDMA/133
[    1.864488] ata1.01: 160836480 sectors, multi 16: LBA48 
[    1.864513] ata1: nv_mode_filter: 0x1f39f&0x1f39f->0x1f39f, BIOS=0x1f000 (0xc5c60000) ACPI=0x1f01f (30:20:0x1f)
[    1.864519] ata1: nv_mode_filter: 0x7f39f&0x3f39f->0x3f39f, BIOS=0x3f000 (0xc5c60000) ACPI=0x3f01f (30:20:0x1f)
[    1.870238] ata1.00: configured for UDMA/66
[    1.879386] ata1.01: configured for UDMA/100
[    1.880631] scsi 1:0:0:0: CD-ROM            SONY     DVD RW DRU-720A  JY08 PQ: 0 ANSI: 5
[    1.884731] sr0: scsi3-mmc drive: 48x/48x writer cd/rw xa/form2 cdda tray
[    1.884736] Uniform CD-ROM driver Revision: 3.20
[    1.884994] sr 1:0:0:0: Attached scsi CD-ROM sr0
[    1.885103] sr 1:0:0:0: Attached scsi generic sg0 type 5
[    1.885692] scsi 1:0:1:0: Direct-Access     ATA      HDS728080PLAT20  PF2O PQ: 0 ANSI: 5
[    1.886108] sd 1:0:1:0: Attached scsi generic sg1 type 0
[    1.886224] ata2: port disabled. ignoring.
[    1.886292] sd 1:0:1:0: [sda] 160836480 512-byte logical blocks: (82.3 GB/76.6 GiB)
[    1.886356] sd 1:0:1:0: [sda] Write Protect is off
[    1.886360] sd 1:0:1:0: [sda] Mode Sense: 00 3a 00 00
[    1.886388] sd 1:0:1:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
[    1.886904]  sda: sda1 sda2
[    1.892947] sd 1:0:1:0: [sda] Attached SCSI disk
[    2.074362] ata3: SATA link down (SStatus 0 SControl 300)
[    2.134636] scsi 0:0:0:0: Direct-Access     Canon    MP170Storage     0103 PQ: 0 ANSI: 2
[    2.136105] sd 0:0:0:0: Attached scsi generic sg2 type 0
[    2.141392] sd 0:0:0:0: [sdb] Attached SCSI removable disk
[    2.387364] ata4: SATA link down (SStatus 0 SControl 300)
[    2.812641] dracut: Scanning devices sda2  for LVM logical volumes vg_livingroom/lv_root vg_livingroom/lv_swap 
[    2.839756] dracut: inactive '/dev/vg_livingroom/lv_root' [50.00 GiB] inherit
[    2.839857] dracut: inactive '/dev/vg_livingroom/lv_home' [23.50 GiB] inherit
[    2.839952] dracut: inactive '/dev/vg_livingroom/lv_swap' [2.69 GiB] inherit
[    3.324788] EXT4-fs (dm-0): mounted filesystem with ordered data mode. Opts: (null)
[    3.402322] dracut: Mounted root filesystem /dev/mapper/vg_livingroom-lv_root
[    3.525843] dracut: Loading SELinux policy
[    3.866185] type=1404 audit(1301024877.681:2): enforcing=1 old_enforcing=0 auid=4294967295 ses=4294967295
[    4.018721] SELinux: 2048 avtab hash slots, 215487 rules.
[    4.116475] SELinux: 2048 avtab hash slots, 215487 rules.
[    4.793926] SELinux:  9 users, 14 roles, 3520 types, 184 bools, 1 sens, 1024 cats
[    4.793932] SELinux:  81 classes, 215487 rules
[    4.800340] SELinux:  Completing initialization.
[    4.800344] SELinux:  Setting up existing superblocks.
[    4.800361] SELinux: initialized (dev sysfs, type sysfs), uses genfs_contexts
[    4.800370] SELinux: initialized (dev rootfs, type rootfs), uses genfs_contexts
[    4.801038] SELinux: initialized (dev bdev, type bdev), uses genfs_contexts
[    4.801049] SELinux: initialized (dev proc, type proc), uses genfs_contexts
[    4.801061] SELinux: initialized (dev tmpfs, type tmpfs), uses transition SIDs
[    4.801096] SELinux: initialized (dev devtmpfs, type devtmpfs), uses transition SIDs
[    4.802329] SELinux: initialized (dev sockfs, type sockfs), uses task SIDs
[    4.802338] SELinux: initialized (dev debugfs, type debugfs), uses genfs_contexts
[    4.804175] SELinux: initialized (dev pipefs, type pipefs), uses task SIDs
[    4.804187] SELinux: initialized (dev anon_inodefs, type anon_inodefs), uses genfs_contexts
[    4.804193] SELinux: initialized (dev devpts, type devpts), uses transition SIDs
[    4.804220] SELinux: initialized (dev hugetlbfs, type hugetlbfs), uses transition SIDs
[    4.804237] SELinux: initialized (dev mqueue, type mqueue), uses transition SIDs
[    4.804258] SELinux: initialized (dev selinuxfs, type selinuxfs), uses genfs_contexts
[    4.804288] SELinux: initialized (dev usbfs, type usbfs), uses genfs_contexts
[    4.804295] SELinux: initialized (dev sysfs, type sysfs), uses genfs_contexts
[    4.804984] SELinux: initialized (dev tmpfs, type tmpfs), uses transition SIDs
[    4.805028] SELinux: initialized (dev dm-0, type ext4), uses xattr
[    4.808779] type=1403 audit(1301024878.624:3): policy loaded auid=4294967295 ses=4294967295
[    5.667080] dracut: Switching root
[    6.539747] readahead-collector: starting
[    8.189593] udev[496]: starting version 161
[    8.748141] WARNING! power/level is deprecated; use power/control instead
[    9.029678] k8temp 0000:00:18.3: Temperature readouts might be wrong - check erratum #141
[    9.106469] forcedeth: Reverse Engineered nForce ethernet driver. Version 0.64.
[    9.106948] ACPI: PCI Interrupt Link [APCH] enabled at IRQ 23
[    9.106955] forcedeth 0000:00:07.0: PCI INT A -> Link[APCH] -> GSI 23 (level, low) -> IRQ 23
[    9.106961] forcedeth 0000:00:07.0: setting latency timer to 64
[    9.170886] EDAC MC: Ver: 2.1.0 Feb  7 2011
[    9.341620] EDAC amd64_edac:  Ver: 3.3.0 Feb  7 2011
[    9.619731] forcedeth 0000:00:07.0: ifname eth0, PHY OUI 0x732 @ 1, addr 00:1b:b9:53:34:23
[    9.619736] forcedeth 0000:00:07.0: highdma pwrctl mgmt lnktim msi desc-v3
[    9.668817] i2c i2c-1: nForce2 SMBus adapter at 0x1c00
[    9.668855] i2c i2c-2: nForce2 SMBus adapter at 0xf400
[    9.720537] EDAC amd64: This node reports that Memory ECC is currently disabled, set F3x44[22] (0000:00:18.3).
[    9.720545] EDAC amd64: ECC disabled in the BIOS or no ECC capability, module will not load.
[    9.720547]  Either enable ECC checking or force module loading by setting 'ecc_enable_override'.
[    9.720549]  (Note that use of the override may cause unknown side effects.)
[    9.720576] amd64_edac: probe of 0000:00:18.2 failed with error -22
[   10.605638] ACPI: PCI Interrupt Link [APC1] enabled at IRQ 16
[   10.605646]   alloc irq_desc for 16 on node 0
[   10.605649]   alloc kstat_irqs on node 0
[   10.605663] parport_pc 0000:01:05.0: PCI INT A -> Link[APC1] -> GSI 16 (level, low) -> IRQ 16
[   10.605669] PCI parallel port detected: 9710:9805, I/O at 0xcc00(0xc800), IRQ 16
[   10.605707] parport0: PC-style at 0xcc00 (0xc800), irq 16 [PCSPP,TRISTATE]
[   10.869093] parport0: Legacy device
[   11.713211] microcode: microcode: CPU0: AMD CPU family 0xf not supported
[   11.713524] microcode: Microcode Update Driver: v2.00 <tigran@aivazian.fsnet.co.uk>, Peter Oruba
[   11.987986] ppdev: user-space parallel port driver
[   14.137607] usblp0: USB Bidirectional printer dev 2 if 1 alt 0 proto 2 vid 0x04A9 pid 0x170A
[   14.138179] usbcore: registered new interface driver usblp
[   14.326318] ACPI: PCI Interrupt Link [AAZA] enabled at IRQ 22
[   14.326326] HDA Intel 0000:00:05.0: PCI INT B -> Link[AAZA] -> GSI 22 (level, low) -> IRQ 22
[   14.326331] hda_intel: Disable MSI for Nvidia chipset
[   14.326380] HDA Intel 0000:00:05.0: setting latency timer to 64
[   14.643035] hda_codec: ALC888: SKU not ready 0x411111f0
[   14.646041] hda_codec: ALC888: BIOS auto-probing.
[   14.646050] ALSA sound/pci/hda/hda_codec.c:4435: autoconfig: line_outs=1 (0x14/0x0/0x0/0x0/0x0)
[   14.646055] ALSA sound/pci/hda/hda_codec.c:4439:    speaker_outs=0 (0x0/0x0/0x0/0x0/0x0)
[   14.646059] ALSA sound/pci/hda/hda_codec.c:4443:    hp_outs=1 (0x1b/0x0/0x0/0x0/0x0)
[   14.646063] ALSA sound/pci/hda/hda_codec.c:4444:    mono: mono_out=0x0
[   14.646067] ALSA sound/pci/hda/hda_codec.c:4455:    inputs: mic=0x18, fmic=0x0, line=0x16, fline=0x0, cd=0x0, aux=0x0
[   14.703060] ALSA sound/pci/hda/patch_realtek.c:1358: realtek: No valid SSID, checking pincfg 0x411111f0 for NID 0x1d
[   14.703066] ALSA sound/pci/hda/patch_realtek.c:1442: realtek: Enable default setup for auto mode as fallback
[   15.250540] audit: name_count maxed, losing inode data: dev=00:07, inode=11124
[   15.250553] audit: name_count maxed, losing inode data: dev=00:07, inode=11124
[   15.250558] audit: name_count maxed, losing inode data: dev=00:07, inode=11124
[   15.250564] audit: name_count maxed, losing inode data: dev=00:07, inode=11116
[   15.250569] audit: name_count maxed, losing inode data: dev=00:07, inode=11129
[   15.250574] audit: name_count maxed, losing inode data: dev=00:07, inode=11129
[   15.250586] audit: name_count maxed, losing inode data: dev=00:07, inode=11129
[   15.250591] audit: name_count maxed, losing inode data: dev=00:07, inode=11129
[   15.250597] audit: name_count maxed, losing inode data: dev=00:07, inode=11116
[   15.250607] audit: name_count maxed, losing inode data: dev=00:07, inode=11134
[   15.250615] audit: name_count maxed, losing inode data: dev=00:07, inode=11134
[   15.250626] audit: name_count maxed, losing inode data: dev=00:07, inode=11134
[   15.250631] audit: name_count maxed, losing inode data: dev=00:07, inode=11134
[   15.250637] audit: name_count maxed, losing inode data: dev=00:07, inode=11116
[   15.250643] audit: name_count maxed, losing inode data: dev=00:07, inode=11139
[   15.250649] audit: name_count maxed, losing inode data: dev=00:07, inode=11139
[   15.250659] audit: name_count maxed, losing inode data: dev=00:07, inode=11139
[   15.250665] audit: name_count maxed, losing inode data: dev=00:07, inode=11139
[   15.250671] audit: name_count maxed, losing inode data: dev=00:07, inode=11116
[   15.250676] audit: name_count maxed, losing inode data: dev=00:07, inode=11144
[   15.250681] audit: name_count maxed, losing inode data: dev=00:07, inode=11144
[   15.250693] audit: name_count maxed, losing inode data: dev=00:07, inode=11144
[   15.250705] audit: name_count maxed, losing inode data: dev=00:07, inode=11144
[   15.250712] audit: name_count maxed, losing inode data: dev=00:07, inode=11116
[   15.250717] audit: name_count maxed, losing inode data: dev=00:07, inode=11149
[   15.250722] audit: name_count maxed, losing inode data: dev=00:07, inode=11149
[   15.250733] audit: name_count maxed, losing inode data: dev=00:07, inode=11149
[   15.250742] audit: name_count maxed, losing inode data: dev=00:07, inode=11149
[   15.250748] audit: name_count maxed, losing inode data: dev=00:07, inode=11116
[   15.250753] audit: name_count maxed, losing inode data: dev=00:07, inode=11154
[   15.250758] audit: name_count maxed, losing inode data: dev=00:07, inode=11154
[   15.250774] audit: name_count maxed, losing inode data: dev=00:07, inode=11154
[   15.250779] audit: name_count maxed, losing inode data: dev=00:07, inode=11154
[   15.250786] audit: name_count maxed, losing inode data: dev=00:07, inode=11116
[   15.250790] audit: name_count maxed, losing inode data: dev=00:07, inode=11159
[   15.250801] audit: name_count maxed, losing inode data: dev=00:07, inode=11159
[   15.250812] audit: name_count maxed, losing inode data: dev=00:07, inode=11159
[   15.250817] audit: name_count maxed, losing inode data: dev=00:07, inode=11159
[   15.250822] audit: name_count maxed, losing inode data: dev=00:07, inode=11116
[   15.250827] audit: name_count maxed, losing inode data: dev=00:07, inode=11164
[   15.250832] audit: name_count maxed, losing inode data: dev=00:07, inode=11164
[   15.250845] audit: name_count maxed, losing inode data: dev=00:07, inode=11164
[   15.250850] audit: name_count maxed, losing inode data: dev=00:07, inode=11164
[   15.250856] audit: name_count maxed, losing inode data: dev=00:07, inode=11116
[   15.250861] audit: name_count maxed, losing inode data: dev=00:07, inode=11169
[   15.250866] audit: name_count maxed, losing inode data: dev=00:07, inode=11169
[   15.250877] audit: name_count maxed, losing inode data: dev=00:07, inode=11169
[   15.250882] audit: name_count maxed, losing inode data: dev=00:07, inode=11169
[   15.250894] audit: name_count maxed, losing inode data: dev=00:07, inode=11116
[   15.250899] audit: name_count maxed, losing inode data: dev=00:07, inode=11174
[   15.250904] audit: name_count maxed, losing inode data: dev=00:07, inode=11174
[   15.250917] audit: name_count maxed, losing inode data: dev=00:07, inode=11174
[   15.250924] audit: name_count maxed, losing inode data: dev=00:07, inode=11174
[   15.250930] audit: name_count maxed, losing inode data: dev=00:07, inode=11116
[   15.250935] audit: name_count maxed, losing inode data: dev=00:07, inode=11179
[   15.250940] audit: name_count maxed, losing inode data: dev=00:07, inode=11179
[   15.250955] audit: name_count maxed, losing inode data: dev=00:07, inode=11179
[   15.250960] audit: name_count maxed, losing inode data: dev=00:07, inode=11179
[   15.250966] audit: name_count maxed, losing inode data: dev=00:07, inode=11116
[   15.250971] audit: name_count maxed, losing inode data: dev=00:07, inode=11184
[   15.250977] audit: name_count maxed, losing inode data: dev=00:07, inode=11184
[   15.251014] audit: name_count maxed, losing inode data: dev=00:07, inode=11184
[   15.251019] audit: name_count maxed, losing inode data: dev=00:07, inode=11184
[   15.251025] audit: name_count maxed, losing inode data: dev=00:07, inode=11116
[   15.251030] audit: name_count maxed, losing inode data: dev=00:07, inode=11189
[   15.251035] audit: name_count maxed, losing inode data: dev=00:07, inode=11189
[   15.251054] audit: name_count maxed, losing inode data: dev=00:07, inode=11189
[   15.251059] audit: name_count maxed, losing inode data: dev=00:07, inode=11189
[   15.251065] audit: name_count maxed, losing inode data: dev=00:07, inode=11116
[   15.251070] audit: name_count maxed, losing inode data: dev=00:07, inode=11194
[   15.251075] audit: name_count maxed, losing inode data: dev=00:07, inode=11194
[   15.251088] audit: name_count maxed, losing inode data: dev=00:07, inode=11194
[   15.251093] audit: name_count maxed, losing inode data: dev=00:07, inode=11194
[   15.251101] audit: name_count maxed, losing inode data: dev=00:07, inode=11116
[   15.251112] audit: name_count maxed, losing inode data: dev=00:07, inode=11199
[   15.251117] audit: name_count maxed, losing inode data: dev=00:07, inode=11199
[   15.251128] audit: name_count maxed, losing inode data: dev=00:07, inode=11199
[   15.251134] audit: name_count maxed, losing inode data: dev=00:07, inode=11199
[   15.251140] audit: name_count maxed, losing inode data: dev=00:07, inode=11116
[   15.251145] audit: name_count maxed, losing inode data: dev=00:07, inode=11204
[   15.251150] audit: name_count maxed, losing inode data: dev=00:07, inode=11204
[   15.251163] audit: name_count maxed, losing inode data: dev=00:07, inode=11204
[   15.251168] audit: name_count maxed, losing inode data: dev=00:07, inode=11204
[   15.251177] audit: name_count maxed, losing inode data: dev=00:07, inode=11116
[   15.251182] audit: name_count maxed, losing inode data: dev=00:07, inode=11209
[   15.251187] audit: name_count maxed, losing inode data: dev=00:07, inode=11209
[   15.251199] audit: name_count maxed, losing inode data: dev=00:07, inode=11209
[   15.251210] audit: name_count maxed, losing inode data: dev=00:07, inode=11209
[   15.251216] audit: name_count maxed, losing inode data: dev=00:07, inode=11116
[   15.251221] audit: name_count maxed, losing inode data: dev=00:07, inode=11214
[   15.251226] audit: name_count maxed, losing inode data: dev=00:07, inode=11214
[   15.251241] audit: name_count maxed, losing inode data: dev=00:07, inode=11214
[   15.251246] audit: name_count maxed, losing inode data: dev=00:07, inode=11214
[   15.251252] audit: name_count maxed, losing inode data: dev=00:07, inode=11116
[   15.251259] audit: name_count maxed, losing inode data: dev=00:07, inode=11219
[   15.251264] audit: name_count maxed, losing inode data: dev=00:07, inode=11219
[   15.251274] audit: name_count maxed, losing inode data: dev=00:07, inode=11219
[   15.251279] audit: name_count maxed, losing inode data: dev=00:07, inode=11219
[   15.251286] audit: name_count maxed, losing inode data: dev=00:07, inode=11116
[   15.251291] audit: name_count maxed, losing inode data: dev=00:07, inode=11224
[   15.251302] audit: name_count maxed, losing inode data: dev=00:07, inode=11224
[   15.251312] audit: name_count maxed, losing inode data: dev=00:07, inode=11224
[   15.251317] audit: name_count maxed, losing inode data: dev=00:07, inode=11224
[   15.251323] audit: name_count maxed, losing inode data: dev=00:07, inode=11116
[   15.251328] audit: name_count maxed, losing inode data: dev=00:07, inode=11229
[   15.251333] audit: name_count maxed, losing inode data: dev=00:07, inode=11229
[   15.251343] audit: name_count maxed, losing inode data: dev=00:07, inode=11229
[   15.251348] audit: name_count maxed, losing inode data: dev=00:07, inode=11229
[   15.251354] audit: name_count maxed, losing inode data: dev=00:07, inode=11116
[   15.251359] audit: name_count maxed, losing inode data: dev=00:07, inode=11234
[   15.251364] audit: name_count maxed, losing inode data: dev=00:07, inode=11234
[   15.251374] audit: name_count maxed, losing inode data: dev=00:07, inode=11234
[   15.251379] audit: name_count maxed, losing inode data: dev=00:07, inode=11234
[   15.251392] audit: name_count maxed, losing inode data: dev=00:07, inode=11116
[   15.251397] audit: name_count maxed, losing inode data: dev=00:07, inode=11239
[   15.251404] audit: name_count maxed, losing inode data: dev=00:07, inode=11239
[   15.251415] audit: name_count maxed, losing inode data: dev=00:07, inode=11239
[   15.251421] audit: name_count maxed, losing inode data: dev=00:07, inode=11239
[   15.251426] audit: name_count maxed, losing inode data: dev=00:07, inode=11116
[   15.251431] audit: name_count maxed, losing inode data: dev=00:07, inode=11244
[   15.251437] audit: name_count maxed, losing inode data: dev=00:07, inode=11244
[   15.251449] audit: name_count maxed, losing inode data: dev=00:07, inode=11244
[   15.251454] audit: name_count maxed, losing inode data: dev=00:07, inode=11244
[   15.251459] audit: name_count maxed, losing inode data: dev=00:07, inode=11116
[   15.251464] audit: name_count maxed, losing inode data: dev=00:07, inode=11249
[   15.251470] audit: name_count maxed, losing inode data: dev=00:07, inode=11249
[   15.251487] audit: name_count maxed, losing inode data: dev=00:07, inode=11249
[   15.251492] audit: name_count maxed, losing inode data: dev=00:07, inode=11249
[   15.251498] audit: name_count maxed, losing inode data: dev=00:07, inode=11116
[   15.251503] audit: name_count maxed, losing inode data: dev=00:07, inode=11254
[   15.251508] audit: name_count maxed, losing inode data: dev=00:07, inode=11254
[   15.251523] audit: name_count maxed, losing inode data: dev=00:07, inode=11254
[   15.251528] audit: name_count maxed, losing inode data: dev=00:07, inode=11254
[   15.251534] audit: name_count maxed, losing inode data: dev=00:07, inode=11116
[   15.251540] audit: name_count maxed, losing inode data: dev=00:07, inode=11259
[   15.251545] audit: name_count maxed, losing inode data: dev=00:07, inode=11259
[   15.251559] audit: name_count maxed, losing inode data: dev=00:07, inode=11259
[   15.251564] audit: name_count maxed, losing inode data: dev=00:07, inode=11259
[   15.251570] audit: name_count maxed, losing inode data: dev=00:07, inode=11116
[   15.251584] audit: name_count maxed, losing inode data: dev=00:07, inode=11264
[   15.251589] audit: name_count maxed, losing inode data: dev=00:07, inode=11264
[   15.251598] audit: name_count maxed, losing inode data: dev=00:07, inode=11264
[   15.251603] audit: name_count maxed, losing inode data: dev=00:07, inode=11264
[   15.251611] audit: name_count maxed, losing inode data: dev=00:07, inode=121
[   15.251617] audit: name_count maxed, losing inode data: dev=00:07, inode=11269
[   15.251622] audit: name_count maxed, losing inode data: dev=00:07, inode=11269
[   15.251627] audit: name_count maxed, losing inode data: dev=00:07, inode=11269
[   15.251632] audit: name_count maxed, losing inode data: dev=00:07, inode=11272
[   15.251638] audit: name_count maxed, losing inode data: dev=00:07, inode=11272
[   15.251648] audit: name_count maxed, losing inode data: dev=00:07, inode=11272
[   15.251654] audit: name_count maxed, losing inode data: dev=00:07, inode=11272
[   15.251660] audit: name_count maxed, losing inode data: dev=00:07, inode=11269
[   15.251670] audit: name_count maxed, losing inode data: dev=00:07, inode=11277
[   15.251675] audit: name_count maxed, losing inode data: dev=00:07, inode=11277
[   15.251680] audit: name_count maxed, losing inode data: dev=00:07, inode=11277
[   15.251685] audit: name_count maxed, losing inode data: dev=00:07, inode=11277
[   15.251691] audit: name_count maxed, losing inode data: dev=00:07, inode=11269
[   15.251699] audit: name_count maxed, losing inode data: dev=00:07, inode=11282
[   15.251704] audit: name_count maxed, losing inode data: dev=00:07, inode=11282
[   15.251709] audit: name_count maxed, losing inode data: dev=00:07, inode=11282
[   15.251714] audit: name_count maxed, losing inode data: dev=00:07, inode=11282
[   15.251720] audit: name_count maxed, losing inode data: dev=00:07, inode=11269
[   15.251725] audit: name_count maxed, losing inode data: dev=00:07, inode=11287
[   15.251730] audit: name_count maxed, losing inode data: dev=00:07, inode=11287
[   15.251742] audit: name_count maxed, losing inode data: dev=00:07, inode=11287
[   15.251752] audit: name_count maxed, losing inode data: dev=00:07, inode=11287
[   15.251758] audit: name_count maxed, losing inode data: dev=00:07, inode=11269
[   15.251763] audit: name_count maxed, losing inode data: dev=00:07, inode=11292
[   15.251768] audit: name_count maxed, losing inode data: dev=00:07, inode=11292
[   15.251777] audit: name_count maxed, losing inode data: dev=00:07, inode=11292
[   15.251782] audit: name_count maxed, losing inode data: dev=00:07, inode=11292
[   15.251788] audit: name_count maxed, losing inode data: dev=00:07, inode=11269
[   15.251794] audit: name_count maxed, losing inode data: dev=00:07, inode=11297
[   15.251799] audit: name_count maxed, losing inode data: dev=00:07, inode=11297
[   15.251807] audit: name_count maxed, losing inode data: dev=00:07, inode=11297
[   15.251812] audit: name_count maxed, losing inode data: dev=00:07, inode=11297
[   15.251819] audit: name_count maxed, losing inode data: dev=00:07, inode=11269
[   15.251824] audit: name_count maxed, losing inode data: dev=00:07, inode=11302
[   15.251836] audit: name_count maxed, losing inode data: dev=00:07, inode=11302
[   15.251841] audit: name_count maxed, losing inode data: dev=00:07, inode=11302
[   15.251846] audit: name_count maxed, losing inode data: dev=00:07, inode=11302
[   15.251852] audit: name_count maxed, losing inode data: dev=00:07, inode=11269
[   15.251857] audit: name_count maxed, losing inode data: dev=00:07, inode=11307
[   15.251862] audit: name_count maxed, losing inode data: dev=00:07, inode=11307
[   15.251872] audit: name_count maxed, losing inode data: dev=00:07, inode=11307
[   15.251877] audit: name_count maxed, losing inode data: dev=00:07, inode=11307
[   15.251883] audit: name_count maxed, losing inode data: dev=00:07, inode=11269
[   15.251888] audit: name_count maxed, losing inode data: dev=00:07, inode=11312
[   15.251893] audit: name_count maxed, losing inode data: dev=00:07, inode=11312
[   15.251906] audit: name_count maxed, losing inode data: dev=00:07, inode=11312
[   15.251911] audit: name_count maxed, losing inode data: dev=00:07, inode=11312
[   15.270372] kvm: Nested Virtualization enabled
[   15.274299] audit: name_count maxed, losing inode data: dev=00:07, inode=11336
[   15.274306] audit: name_count maxed, losing inode data: dev=00:07, inode=11328
[   15.274312] audit: name_count maxed, losing inode data: dev=00:07, inode=11328
[   15.274317] audit: name_count maxed, losing inode data: dev=00:07, inode=11328
[   15.274322] audit: name_count maxed, losing inode data: dev=00:07, inode=11328
[   15.274328] audit: name_count maxed, losing inode data: dev=00:07, inode=11328
[   15.274333] audit: name_count maxed, losing inode data: dev=00:07, inode=11328
[   15.274341] audit: name_count maxed, losing inode data: dev=00:07, inode=11328
[   15.274346] audit: name_count maxed, losing inode data: dev=00:07, inode=11328
[   15.274351] audit: name_count maxed, losing inode data: dev=00:07, inode=11328
[   15.274357] audit: name_count maxed, losing inode data: dev=00:07, inode=11328
[   15.274368] audit: name_count maxed, losing inode data: dev=00:07, inode=11328
[   15.274374] audit: name_count maxed, losing inode data: dev=00:07, inode=11328
[   15.274379] audit: name_count maxed, losing inode data: dev=00:07, inode=11328
[   15.274385] audit: name_count maxed, losing inode data: dev=00:07, inode=11328
[   15.274390] audit: name_count maxed, losing inode data: dev=00:07, inode=11328
[   15.274396] audit: name_count maxed, losing inode data: dev=00:07, inode=11328
[   15.274401] audit: name_count maxed, losing inode data: dev=00:07, inode=11328
[   15.274406] audit: name_count maxed, losing inode data: dev=00:07, inode=11328
[   15.274412] audit: name_count maxed, losing inode data: dev=00:07, inode=11328
[   15.274417] audit: name_count maxed, losing inode data: dev=00:07, inode=11328
[   15.274423] audit: name_count maxed, losing inode data: dev=00:07, inode=11328
[   15.274428] audit: name_count maxed, losing inode data: dev=00:07, inode=11328
[   15.274433] audit: name_count maxed, losing inode data: dev=00:07, inode=11328
[   15.274445] audit: name_count maxed, losing inode data: dev=00:07, inode=11328
[   17.150418] EXT4-fs (dm-0): re-mounted. Opts: (null)
[   17.997011] EXT4-fs (sda1): mounted filesystem with ordered data mode. Opts: (null)
[   18.015987] SELinux: initialized (dev sda1, type ext4), uses xattr
[   18.053386] EXT4-fs (dm-2): mounted filesystem with ordered data mode. Opts: (null)
[   18.053405] SELinux: initialized (dev dm-2, type ext4), uses xattr
[   20.236061] Adding 2818044k swap on /dev/mapper/vg_livingroom-lv_swap.  Priority:-1 extents:1 across:2818044k 
[   20.241644] SELinux: initialized (dev binfmt_misc, type binfmt_misc), uses genfs_contexts
[   20.681685] readahead-disable-service: delaying service auditd
[   21.816572] NET: Registered protocol family 10
[   21.817568] lo: Disabled Privacy Extensions
[   21.838525] ip6_tables: (C) 2000-2006 Netfilter Core Team
[   22.554286] powernow-k8: Found 1 AMD Athlon(tm) 64 Processor 3200+ (1 cpu cores) (version 2.20.00)
[   22.554352] powernow-k8:    0 : fid 0xc (2000 MHz), vid 0x8
[   22.554355] powernow-k8:    1 : fid 0xa (1800 MHz), vid 0xa
[   22.554358] powernow-k8:    2 : fid 0x2 (1000 MHz), vid 0x12
[   23.001013] Clocksource tsc unstable (delta = -74939337 ns)
[   26.307644]   alloc irq_desc for 43 on node 0
[   26.307649]   alloc kstat_irqs on node 0
[   26.307662] forcedeth 0000:00:07.0: irq 43 for MSI/MSI-X
[   26.985961] RPC: Registered udp transport module.
[   26.985964] RPC: Registered tcp transport module.
[   26.985967] RPC: Registered tcp NFSv4.1 backchannel transport module.
[   26.998994] SELinux: initialized (dev rpc_pipefs, type rpc_pipefs), uses genfs_contexts
[   32.440886] NET: Registered protocol family 15
[   32.966866] padlock: VIA PadLock not detected.
[   32.979559] padlock: VIA PadLock Hash Engine not detected.
[   33.020180] Intel AES-NI instructions are not detected.
[   33.053505] Intel AES-NI instructions are not detected.
[   33.060422] padlock: VIA PadLock not detected.
[   33.920032] alg: No test for cipher_null (cipher_null-generic)
[   33.925884] alg: No test for ecb(cipher_null) (ecb-cipher_null)
[   33.926248] alg: No test for digest_null (digest_null-generic)
[   33.927265] alg: No test for compress_null (compress_null-generic)
[   36.506030] eth0: no IPv6 routers present
[   39.097226] Bridge firewalling registered
[   40.647618] Ebtables v2.0 registered
[   41.074173] [drm] nouveau 0000:00:0d.0: Allocating FIFO number 1
[   41.075430] [drm] nouveau 0000:00:0d.0: nouveau_channel_alloc: initialised FIFO 1
[   42.868659] SELinux: initialized (dev mqueue, type mqueue), uses transition SIDs
[   42.868874] SELinux: initialized (dev proc, type proc), uses genfs_contexts
[   42.898323] SELinux: initialized (dev mqueue, type mqueue), uses transition SIDs
[   42.905827] lo: Disabled Privacy Extensions
[   42.905909] SELinux: initialized (dev proc, type proc), uses genfs_contexts
[   49.164047] type=1305 audit(1301024922.977:31574): auid=4294967295 ses=4294967295 subj=system_u:system_r:readahead_t:s0 op="remove rule" key=(null) list=4 res=1
[   49.164063] type=1305 audit(1301024922.977:31575): audit_enabled=0 old=1 auid=4294967295 ses=4294967295 subj=system_u:system_r:readahead_t:s0 res=1
[   49.178062] type=1302 audit(1301024922.974:31569): item=0 name="/usr/lib64/libXext.so.6" inode=141649 dev=fd:00 mode=0100755 ouid=0 ogid=0 rdev=00:00 obj=system_u:object_r:lib_t:s0
[   49.184045] type=1307 audit(1301024922.976:31573):  cwd="/var/gdm"
[   49.184076] type=1302 audit(1301024922.976:31573): item=0 name="/etc/fonts/conf.d/65-0-lohit-tamil.conf" inode=152767 dev=fd:00 mode=0100644 ouid=0 ogid=0 rdev=00:00 obj=system_u:object_r:usr_t:s0
[   51.712722] readahead-collector: starting delayed service auditd
[   52.063176] readahead-collector: sorting
[   52.280472] readahead-collector: finished
[   62.349263] fuse init (API version 7.14)
[   62.522044] SELinux: initialized (dev fuse, type fuse), uses genfs_contexts
[   62.539059] SELinux: initialized (dev fusectl, type fusectl), uses genfs_contexts
[ 2324.026273] [drm] nouveau 0000:00:0d.0: Setting dpms mode 3 on vga encoder (output 0)
[ 2804.539840] [drm] nouveau 0000:00:0d.0: Setting dpms mode 0 on vga encoder (output 0)
[ 2811.745204] [drm] nouveau 0000:00:0d.0: Allocating FIFO number 2
[ 2811.746313] [drm] nouveau 0000:00:0d.0: nouveau_channel_alloc: initialised FIFO 2
[ 2823.301035] SELinux: initialized (dev fuse, type fuse), uses genfs_contexts
[ 6874.924179] psmouse.c: Wheel Mouse at isa0060/serio1/input0 lost synchronization, throwing 2 bytes away.
[ 6892.590822] lp0: using parport0 (interrupt-driven).
[ 6892.590828] lp0: console ready
post #22 of 37
Quote:
Originally Posted by The Hundred Gunner View Post
Here it is after I opened the paper tray (which began the lag) and then proceeded to print.
Ah, now we're making progress. And the difference is:

Quote:
Originally Posted by The Hundred Gunner View Post
Code:
[ 6874.924179] psmouse.c: Wheel Mouse at isa0060/serio1/input0 lost synchronization, throwing 2 bytes away.
[ 6892.590822] lp0: using parport0 (interrupt-driven).
[ 6892.590828] lp0: console ready
From doing some searching I learned that this can happen if the mouse interrupts are delayed more than a fraction of a second or so. Which would mean that your parallel port card is behaving very badly, and the best thing to do is to take it out back and shoot it.

It can also happen if you're using a crappy KVM, though you never mentioned using one of those. In that case, though, it SHOULD recover after a few seconds, and from your description it doesn't. So back to the above.
Underground
(14 items)
 
  
CPUMotherboardGraphicsRAM
Core i7 920 C0 ASUS P6T6 WS Revolution GTX 460 TR3X6G1600C8D 
Hard DriveOptical DriveCoolingOS
WD1001FALS SAMSUNG SH-S223F 22X DVD MULTI Corsair H50 Fedora 16 KDE x86_64 
MonitorKeyboardPowerCase
HP w19b Microsoft Comfort Curve Corsair CX600 Thermaltake Armor VA8003BWS 
MouseMouse Pad
Razer DeathAdder Black 
  hide details  
Reply
Underground
(14 items)
 
  
CPUMotherboardGraphicsRAM
Core i7 920 C0 ASUS P6T6 WS Revolution GTX 460 TR3X6G1600C8D 
Hard DriveOptical DriveCoolingOS
WD1001FALS SAMSUNG SH-S223F 22X DVD MULTI Corsair H50 Fedora 16 KDE x86_64 
MonitorKeyboardPowerCase
HP w19b Microsoft Comfort Curve Corsair CX600 Thermaltake Armor VA8003BWS 
MouseMouse Pad
Razer DeathAdder Black 
  hide details  
Reply
post #23 of 37
Thread Starter 
lol crap. Would moving the parallel card to a different slot help? Hell, I'll give it a shot...
post #24 of 37
Quote:
Originally Posted by The Hundred Gunner View Post
lol crap. Would moving the parallel card to a different slot help? Hell, I'll give it a shot...
Yeah, it just might help. Also check the "Plug and Play OS" option in your BIOS, change it to Yes, or No, or whatever it is not presently set to. After that I'm out of ideas.

I do understand the attraction though; there must be a zillion of those particular printers on the secondary market (or more likely in dumpsters; I threw one away myself a few years ago). At this point, though, I'm not sure it's worth the trouble of having a parallel port in the computer.
Underground
(14 items)
 
  
CPUMotherboardGraphicsRAM
Core i7 920 C0 ASUS P6T6 WS Revolution GTX 460 TR3X6G1600C8D 
Hard DriveOptical DriveCoolingOS
WD1001FALS SAMSUNG SH-S223F 22X DVD MULTI Corsair H50 Fedora 16 KDE x86_64 
MonitorKeyboardPowerCase
HP w19b Microsoft Comfort Curve Corsair CX600 Thermaltake Armor VA8003BWS 
MouseMouse Pad
Razer DeathAdder Black 
  hide details  
Reply
Underground
(14 items)
 
  
CPUMotherboardGraphicsRAM
Core i7 920 C0 ASUS P6T6 WS Revolution GTX 460 TR3X6G1600C8D 
Hard DriveOptical DriveCoolingOS
WD1001FALS SAMSUNG SH-S223F 22X DVD MULTI Corsair H50 Fedora 16 KDE x86_64 
MonitorKeyboardPowerCase
HP w19b Microsoft Comfort Curve Corsair CX600 Thermaltake Armor VA8003BWS 
MouseMouse Pad
Razer DeathAdder Black 
  hide details  
Reply
post #25 of 37
Thread Starter 
Quote:
Originally Posted by error10 View Post
Yeah, it just might help. Also check the "Plug and Play OS" option in your BIOS, change it to Yes, or No, or whatever it is not presently set to. After that I'm out of ideas.
I had already tried the PnP OS option, and that didn't work.

I also just tried disabling the "PS/2 Mouse" option (which says it frees up IRQ 12) and plugged in a USB mouse. It still fails.

So I guess I'm just going to have to try my luck with Debian 6. Thanks for your help, though.

Quote:
Originally Posted by error10 View Post
I do understand the attraction though; there must be a zillion of those particular printers on the secondary market (or more likely in dumpsters; I threw one away myself a few years ago). At this point, though, I'm not sure it's worth the trouble of having a parallel port in the computer.
Actually, I've had this printer since 1994, about 17 years. It's very reliable, and the laser toner cartridge lasts forever (the first one lasted 11 years, and the 2nd one lasted 5 or 6 years.) I'm on only my 3rd cartridge. So yes, this printer is worth the trouble to me!
post #26 of 37
Quote:
Originally Posted by The Hundred Gunner View Post
So I guess I'm just going to have to try my luck with Debian 6. Thanks for your help, though.
Somehow I don't think this will help very much. Though you could easily boot from a live DVD and find out.

Quote:
Originally Posted by The Hundred Gunner View Post
Actually, I've had this printer since 1994, about 17 years. It's very reliable, and the laser toner cartridge lasts forever (the first one lasted 11 years, and the 2nd one lasted 5 or 6 years.) I'm on only my 3rd cartridge. So yes, this printer is worth the trouble to me!
11 years? You don't print very much, do you?

My final suggestion, I think, will be to take the parallel port adapter out of your computer, hit it with a sledgehammer, and then replace it with something like this.
Underground
(14 items)
 
  
CPUMotherboardGraphicsRAM
Core i7 920 C0 ASUS P6T6 WS Revolution GTX 460 TR3X6G1600C8D 
Hard DriveOptical DriveCoolingOS
WD1001FALS SAMSUNG SH-S223F 22X DVD MULTI Corsair H50 Fedora 16 KDE x86_64 
MonitorKeyboardPowerCase
HP w19b Microsoft Comfort Curve Corsair CX600 Thermaltake Armor VA8003BWS 
MouseMouse Pad
Razer DeathAdder Black 
  hide details  
Reply
Underground
(14 items)
 
  
CPUMotherboardGraphicsRAM
Core i7 920 C0 ASUS P6T6 WS Revolution GTX 460 TR3X6G1600C8D 
Hard DriveOptical DriveCoolingOS
WD1001FALS SAMSUNG SH-S223F 22X DVD MULTI Corsair H50 Fedora 16 KDE x86_64 
MonitorKeyboardPowerCase
HP w19b Microsoft Comfort Curve Corsair CX600 Thermaltake Armor VA8003BWS 
MouseMouse Pad
Razer DeathAdder Black 
  hide details  
Reply
post #27 of 37
Thread Starter 
Quote:
Originally Posted by error10 View Post
Somehow I don't think this will help very much. Though you could easily boot from a live DVD and find out.
Wow, I'm so stupid. I forgot all about live mode. I went and installed it only to find out that I can't print at all in Debian lol

And it doesn't have an add/remove applications program... And it won't install Synaptic via apt-get or aptitude... Anyway. Why would this happen for Fedora 14 only, though, and not for Suse or Debian or Sabayon or any of the other distros I've tried?

Also, how well are the USB >> Parallel cables supported in Linux?
post #28 of 37
Quote:
Originally Posted by The Hundred Gunner View Post
Wow, I'm so stupid. I forgot all about live mode. I went and installed it only to find out that I can't print at all in Debian lol

And it doesn't have an add/remove applications program... And it won't install Synaptic via apt-get or aptitude... Anyway. Why would this happen for Fedora 14 only, though, and not for Suse or Debian or Sabayon or any of the other distros I've tried?

Also, how well are the USB >> Parallel cables supported in Linux?
As far as I know the cable should just work.
Underground
(14 items)
 
  
CPUMotherboardGraphicsRAM
Core i7 920 C0 ASUS P6T6 WS Revolution GTX 460 TR3X6G1600C8D 
Hard DriveOptical DriveCoolingOS
WD1001FALS SAMSUNG SH-S223F 22X DVD MULTI Corsair H50 Fedora 16 KDE x86_64 
MonitorKeyboardPowerCase
HP w19b Microsoft Comfort Curve Corsair CX600 Thermaltake Armor VA8003BWS 
MouseMouse Pad
Razer DeathAdder Black 
  hide details  
Reply
Underground
(14 items)
 
  
CPUMotherboardGraphicsRAM
Core i7 920 C0 ASUS P6T6 WS Revolution GTX 460 TR3X6G1600C8D 
Hard DriveOptical DriveCoolingOS
WD1001FALS SAMSUNG SH-S223F 22X DVD MULTI Corsair H50 Fedora 16 KDE x86_64 
MonitorKeyboardPowerCase
HP w19b Microsoft Comfort Curve Corsair CX600 Thermaltake Armor VA8003BWS 
MouseMouse Pad
Razer DeathAdder Black 
  hide details  
Reply
post #29 of 37
Quote:
Originally Posted by EntTheGod View Post
id like to know how to FULLY disable mouse accel

mouse accel is teh devil and should die in a fire...

no accel ftw thats how i hit snap 90 degree shots CONSISTENTLY and snap 180 shots at least half the time hehe <3 quake
You can create a "mouseaccel.sh" script in any text editor that simply has the values you want like this
Code:
 xset m 1 1
and set it to whatever you prefer.
NewMain
(16 items)
 
  
CPUMotherboardGraphicsRAM
Intel i5 - 3550 Asrock Z77 Extreme4 Gigabyte GTX 760  4x2GB Corsair Vengeance 
Hard DriveOptical DriveCoolingOS
Seagate SATA 2TB x 2  Plextor PX-891SAW CM-Hyper N520 Slackware 14, Studio KUbuntu, OpenSuSe 12.3, Wi... 
MonitorKeyboardPowerCase
32" Vizio HDTV + DLP Logitech Wireless Corsair HX-850 Antec Sonata I 
MouseMouse PadAudioOther
Razer DeathAdder 2013 dual ESI Juli@ CoolGear ExtSata Enclosure w/ Optical and 3TB S... 
  hide details  
Reply
NewMain
(16 items)
 
  
CPUMotherboardGraphicsRAM
Intel i5 - 3550 Asrock Z77 Extreme4 Gigabyte GTX 760  4x2GB Corsair Vengeance 
Hard DriveOptical DriveCoolingOS
Seagate SATA 2TB x 2  Plextor PX-891SAW CM-Hyper N520 Slackware 14, Studio KUbuntu, OpenSuSe 12.3, Wi... 
MonitorKeyboardPowerCase
32" Vizio HDTV + DLP Logitech Wireless Corsair HX-850 Antec Sonata I 
MouseMouse PadAudioOther
Razer DeathAdder 2013 dual ESI Juli@ CoolGear ExtSata Enclosure w/ Optical and 3TB S... 
  hide details  
Reply
post #30 of 37
Thread Starter 
Quote:
Originally Posted by error10 View Post
As far as I know the cable should just work.
Well, I got one... And it doesn't. I set it up the same way with the device URI:

parallel:/dev/usb/lp0

My printer driver and everything else is the same. It says that the printer status is "Idle - Printer is Online." But when I try to print, nothing happens.

Here's a lsusb dump:

Code:
Bus 002 Device 003: ID 9710:7705 MosChip Semiconductor MCS7705 Parallel port adapter
Bus 002 Device 001: ID 1d6b:0001 Linux Foundation 1.1 root hub
Bus 001 Device 003: ID 04a9:170a Canon, Inc. PIXMA MP170 Scanner
Bus 001 Device 001: ID 1d6b:0002 Linux Foundation 2.0 root hub
New Posts  All Forums:Forum Nav:
  Return Home
  Back to Forum: Linux, Unix
Overclock.net › Forums › Software, Programming and Coding › Operating Systems › Linux, Unix › Fedora 14: Jittery/Laggy Mouse