Overclock.net › Forums › Intel › Intel Motherboards › Intel BIOS › Booting Issue - Please Assist
New Posts  All Forums:Forum Nav:

Booting Issue - Please Assist

post #1 of 20
Thread Starter 
**I was not entirely sure where to post this thread but since it gives me a weird message in the post menu I figured I would post it here.**

Last night when I would turn the computer on it would run and not display anything on the monitor for about 5-10 minutes. Then it would post and bring up the BIOS. I was finally able to install the operating system and now when I log into Windows 7 and place in the drivers and utilities disk for my operating system my monitor goes into power saving mode and then turns on 30 seconds later with the computer rebooting back into BIOS stating that the over clock was not successful.

I am no computer expert but it almost sounds like it is drawing too much power from the PSU and it is not getting the wattage that it requires. All the fans are running at a constant idle speed and then they drop down for a couple seconds and then back up and that is when it seems to reboot itself. Everything seems to be connected properly so I'm not sure what this problem could be. I did not have much time to review the problem too much since I got done around 3:00am and needed to get to work at 8:00am.

Any help would be GREATLY appreciated. Computer specifications are below my signature. I posted something previously on the forums about the parts I was going to purchase but I upgrade them a bit and I think the 500W may not be strong enough to keep everything alive.
First Build
(13 items)
 
  
CPUMotherboardGraphicsRAM
i7-960 Bloodfield 3.2GHz MSI X58 Pro-E LGA 1366 Intel ATX MSI N560GTX-Ti Twin Frozr II/OC GeForce GTX 560 G.SKILL Ripjaws Series 12GB (6 x 2GB) 240-Pin DDR3 
Hard DriveOSKeyboardPower
SAMSUNG Spinpoint 1TB 7200 RPM Windows 7 Home Premium Logitech G510 Antec 700W 
Case
Antec 902 V3 ATX Mid Tower 
  hide details  
Reply
First Build
(13 items)
 
  
CPUMotherboardGraphicsRAM
i7-960 Bloodfield 3.2GHz MSI X58 Pro-E LGA 1366 Intel ATX MSI N560GTX-Ti Twin Frozr II/OC GeForce GTX 560 G.SKILL Ripjaws Series 12GB (6 x 2GB) 240-Pin DDR3 
Hard DriveOSKeyboardPower
SAMSUNG Spinpoint 1TB 7200 RPM Windows 7 Home Premium Logitech G510 Antec 700W 
Case
Antec 902 V3 ATX Mid Tower 
  hide details  
Reply
post #2 of 20
I have to say that even though NVIDIA recommends a 500W to power a system with a single GTX 560 in it, I'm not so sure that a 500W TR2 would be up to the task - especially for a system like this. I most certainly wouldn't overclock with it due to it's low quality.

However, did you change anything in the BIOS yet? I mean, not for the sake of trying to solve this problem, but just in general.
It's a computer!
(19 items)
 
  
CPUMotherboardGraphicsRAM
i5-2500K @ 4.5GHz (1.368-1.384V fixed voltage) ASUS P8P67 EVO B3 (UEFI ver. 1850) GTX 780 ASUS DirectCU II (1228 / 6300, 1.180V) G.SKILL Ripjaws X 8GB (2 x 4GB) 1866MHz, CL9 
Hard DriveHard DriveHard DriveOptical Drive
250 GB Samsung 840 EVO (C:\) 250 GB Samsung 840 EVO (D:\) 150 GB WD VelociRaptor Samsung SH-S243N 24x DVD Burner 
Optical DriveCoolingOSMonitor
Samsung SH-S203N 20X DVD Burner Thermaltake Frio Win 7 Home Premium x64 SP1 Retail AOC G2460PG (24" 1920 x 1080 144Hz G-SYNC) 
KeyboardPowerCaseMouse
Filco Majestouch 104-key Cherry MX Blues w/NKRO Corsair HX650 (Bronze, ordered on 12-12-2009) CM 690 Intellimouse Optical (1.1A) 1000Hz polling rate 
Mouse PadAudioAudio
Basic, but premium round X-Fi Titanium HD Klipsch ProMedia 2.1 (with 16 AWG Monster Cable... 
  hide details  
Reply
It's a computer!
(19 items)
 
  
CPUMotherboardGraphicsRAM
i5-2500K @ 4.5GHz (1.368-1.384V fixed voltage) ASUS P8P67 EVO B3 (UEFI ver. 1850) GTX 780 ASUS DirectCU II (1228 / 6300, 1.180V) G.SKILL Ripjaws X 8GB (2 x 4GB) 1866MHz, CL9 
Hard DriveHard DriveHard DriveOptical Drive
250 GB Samsung 840 EVO (C:\) 250 GB Samsung 840 EVO (D:\) 150 GB WD VelociRaptor Samsung SH-S243N 24x DVD Burner 
Optical DriveCoolingOSMonitor
Samsung SH-S203N 20X DVD Burner Thermaltake Frio Win 7 Home Premium x64 SP1 Retail AOC G2460PG (24" 1920 x 1080 144Hz G-SYNC) 
KeyboardPowerCaseMouse
Filco Majestouch 104-key Cherry MX Blues w/NKRO Corsair HX650 (Bronze, ordered on 12-12-2009) CM 690 Intellimouse Optical (1.1A) 1000Hz polling rate 
Mouse PadAudioAudio
Basic, but premium round X-Fi Titanium HD Klipsch ProMedia 2.1 (with 16 AWG Monster Cable... 
  hide details  
Reply
post #3 of 20
Thread Starter 
I have changed nothing in the BIOS, when that message appears it states that it has changed it back to optimized default settings. Which is what the Motherboard Pamphlet told me to do prior to the install of the operating system. The first time I attempted to boot up the operating system disk I did turn off the turbo but that was over written when it went back to optimized default settings.

What are your opinions on power supplies? Should I go for a 600W or more? I was planning on running SLI at some point so i want to make sure that I have enough juice to run that as well as OC the CPU.
First Build
(13 items)
 
  
CPUMotherboardGraphicsRAM
i7-960 Bloodfield 3.2GHz MSI X58 Pro-E LGA 1366 Intel ATX MSI N560GTX-Ti Twin Frozr II/OC GeForce GTX 560 G.SKILL Ripjaws Series 12GB (6 x 2GB) 240-Pin DDR3 
Hard DriveOSKeyboardPower
SAMSUNG Spinpoint 1TB 7200 RPM Windows 7 Home Premium Logitech G510 Antec 700W 
Case
Antec 902 V3 ATX Mid Tower 
  hide details  
Reply
First Build
(13 items)
 
  
CPUMotherboardGraphicsRAM
i7-960 Bloodfield 3.2GHz MSI X58 Pro-E LGA 1366 Intel ATX MSI N560GTX-Ti Twin Frozr II/OC GeForce GTX 560 G.SKILL Ripjaws Series 12GB (6 x 2GB) 240-Pin DDR3 
Hard DriveOSKeyboardPower
SAMSUNG Spinpoint 1TB 7200 RPM Windows 7 Home Premium Logitech G510 Antec 700W 
Case
Antec 902 V3 ATX Mid Tower 
  hide details  
Reply
post #4 of 20
Quote:
Originally Posted by Hi2uHorde View Post
I have changed nothing in the BIOS, when that message appears it states that it has changed it back to optimized default settings. Which is what the Motherboard Pamphlet told me to do prior to the install of the operating system. The first time I attempted to boot up the operating system disk I did turn off the turbo but that was over written when it went back to optimized default settings.

What are your opinions on power supplies? Should I go for a 600W or more? I was planning on running SLI at some point so i want to make sure that I have enough juice to run that as well as OC the CPU.
I admit that I'm completely stumped on this. However, I'm half-expecting someone to chime in and blame the memory.

As for PSUs, a good 600-650W (it's easier to find good 620W's and 650W's) would power this system fairly easily with two GTX 560s in it. Of course, it also depends how much you can afford.
It's a computer!
(19 items)
 
  
CPUMotherboardGraphicsRAM
i5-2500K @ 4.5GHz (1.368-1.384V fixed voltage) ASUS P8P67 EVO B3 (UEFI ver. 1850) GTX 780 ASUS DirectCU II (1228 / 6300, 1.180V) G.SKILL Ripjaws X 8GB (2 x 4GB) 1866MHz, CL9 
Hard DriveHard DriveHard DriveOptical Drive
250 GB Samsung 840 EVO (C:\) 250 GB Samsung 840 EVO (D:\) 150 GB WD VelociRaptor Samsung SH-S243N 24x DVD Burner 
Optical DriveCoolingOSMonitor
Samsung SH-S203N 20X DVD Burner Thermaltake Frio Win 7 Home Premium x64 SP1 Retail AOC G2460PG (24" 1920 x 1080 144Hz G-SYNC) 
KeyboardPowerCaseMouse
Filco Majestouch 104-key Cherry MX Blues w/NKRO Corsair HX650 (Bronze, ordered on 12-12-2009) CM 690 Intellimouse Optical (1.1A) 1000Hz polling rate 
Mouse PadAudioAudio
Basic, but premium round X-Fi Titanium HD Klipsch ProMedia 2.1 (with 16 AWG Monster Cable... 
  hide details  
Reply
It's a computer!
(19 items)
 
  
CPUMotherboardGraphicsRAM
i5-2500K @ 4.5GHz (1.368-1.384V fixed voltage) ASUS P8P67 EVO B3 (UEFI ver. 1850) GTX 780 ASUS DirectCU II (1228 / 6300, 1.180V) G.SKILL Ripjaws X 8GB (2 x 4GB) 1866MHz, CL9 
Hard DriveHard DriveHard DriveOptical Drive
250 GB Samsung 840 EVO (C:\) 250 GB Samsung 840 EVO (D:\) 150 GB WD VelociRaptor Samsung SH-S243N 24x DVD Burner 
Optical DriveCoolingOSMonitor
Samsung SH-S203N 20X DVD Burner Thermaltake Frio Win 7 Home Premium x64 SP1 Retail AOC G2460PG (24" 1920 x 1080 144Hz G-SYNC) 
KeyboardPowerCaseMouse
Filco Majestouch 104-key Cherry MX Blues w/NKRO Corsair HX650 (Bronze, ordered on 12-12-2009) CM 690 Intellimouse Optical (1.1A) 1000Hz polling rate 
Mouse PadAudioAudio
Basic, but premium round X-Fi Titanium HD Klipsch ProMedia 2.1 (with 16 AWG Monster Cable... 
  hide details  
Reply
post #5 of 20
Thread Starter 
What sort of problem would I be getting from my Memory? I actually have 12GB (6 x 2GB) now and I tried booting off just one and placed it in the correct single channel location on the motherboard and it was having the same problem.

I have gotten used to the sound of my older computer and the way that the fans dip on my new one makes me think they aren't getting enough power which then restarts the computer. I could be wrong though, I just want to get this thing up and running. I don't mind paying for a 620W or 650W as long as it gets my computer running without a problem since I don't think the 500W is cutting it.
First Build
(13 items)
 
  
CPUMotherboardGraphicsRAM
i7-960 Bloodfield 3.2GHz MSI X58 Pro-E LGA 1366 Intel ATX MSI N560GTX-Ti Twin Frozr II/OC GeForce GTX 560 G.SKILL Ripjaws Series 12GB (6 x 2GB) 240-Pin DDR3 
Hard DriveOSKeyboardPower
SAMSUNG Spinpoint 1TB 7200 RPM Windows 7 Home Premium Logitech G510 Antec 700W 
Case
Antec 902 V3 ATX Mid Tower 
  hide details  
Reply
First Build
(13 items)
 
  
CPUMotherboardGraphicsRAM
i7-960 Bloodfield 3.2GHz MSI X58 Pro-E LGA 1366 Intel ATX MSI N560GTX-Ti Twin Frozr II/OC GeForce GTX 560 G.SKILL Ripjaws Series 12GB (6 x 2GB) 240-Pin DDR3 
Hard DriveOSKeyboardPower
SAMSUNG Spinpoint 1TB 7200 RPM Windows 7 Home Premium Logitech G510 Antec 700W 
Case
Antec 902 V3 ATX Mid Tower 
  hide details  
Reply
post #6 of 20
Quote:
Originally Posted by Hi2uHorde View Post
What sort of problem would I be getting from my Memory? I actually have 12GB (6 x 2GB) now and I tried booting off just one and placed it in the correct single channel location on the motherboard and it was having the same problem.

I have gotten used to the sound of my older computer and the way that the fans dip on my new one makes me think they aren't getting enough power which then restarts the computer. I could be wrong though, I just want to get this thing up and running. I don't mind paying for a 620W or 650W as long as it gets my computer running without a problem since I don't think the 500W is cutting it.
Then check out the 650W Antec TruePower New:

http://www.newegg.com/Product/Produc...82E16817371021

It's on sale for $79.99 shipped. It'll have no problem once you add in a 2nd GTX 560. Plus, it's significantly better than the TR2 series.


Anyway, I think I'd be in over my head if I kept trying to figure out what's up with your system.
It's a computer!
(19 items)
 
  
CPUMotherboardGraphicsRAM
i5-2500K @ 4.5GHz (1.368-1.384V fixed voltage) ASUS P8P67 EVO B3 (UEFI ver. 1850) GTX 780 ASUS DirectCU II (1228 / 6300, 1.180V) G.SKILL Ripjaws X 8GB (2 x 4GB) 1866MHz, CL9 
Hard DriveHard DriveHard DriveOptical Drive
250 GB Samsung 840 EVO (C:\) 250 GB Samsung 840 EVO (D:\) 150 GB WD VelociRaptor Samsung SH-S243N 24x DVD Burner 
Optical DriveCoolingOSMonitor
Samsung SH-S203N 20X DVD Burner Thermaltake Frio Win 7 Home Premium x64 SP1 Retail AOC G2460PG (24" 1920 x 1080 144Hz G-SYNC) 
KeyboardPowerCaseMouse
Filco Majestouch 104-key Cherry MX Blues w/NKRO Corsair HX650 (Bronze, ordered on 12-12-2009) CM 690 Intellimouse Optical (1.1A) 1000Hz polling rate 
Mouse PadAudioAudio
Basic, but premium round X-Fi Titanium HD Klipsch ProMedia 2.1 (with 16 AWG Monster Cable... 
  hide details  
Reply
It's a computer!
(19 items)
 
  
CPUMotherboardGraphicsRAM
i5-2500K @ 4.5GHz (1.368-1.384V fixed voltage) ASUS P8P67 EVO B3 (UEFI ver. 1850) GTX 780 ASUS DirectCU II (1228 / 6300, 1.180V) G.SKILL Ripjaws X 8GB (2 x 4GB) 1866MHz, CL9 
Hard DriveHard DriveHard DriveOptical Drive
250 GB Samsung 840 EVO (C:\) 250 GB Samsung 840 EVO (D:\) 150 GB WD VelociRaptor Samsung SH-S243N 24x DVD Burner 
Optical DriveCoolingOSMonitor
Samsung SH-S203N 20X DVD Burner Thermaltake Frio Win 7 Home Premium x64 SP1 Retail AOC G2460PG (24" 1920 x 1080 144Hz G-SYNC) 
KeyboardPowerCaseMouse
Filco Majestouch 104-key Cherry MX Blues w/NKRO Corsair HX650 (Bronze, ordered on 12-12-2009) CM 690 Intellimouse Optical (1.1A) 1000Hz polling rate 
Mouse PadAudioAudio
Basic, but premium round X-Fi Titanium HD Klipsch ProMedia 2.1 (with 16 AWG Monster Cable... 
  hide details  
Reply
post #7 of 20
Thread Starter 
Hopefully I won't have a problem returning the TR2 to newegg. I think I may run past Bestbuy and check out the PSUs they have and if they have a good decently cheap one then I may try it out and see if it solves anything and use it until the Antec 650W comes in. So anxious to get this working I don't want to wait for deliveries anymore
First Build
(13 items)
 
  
CPUMotherboardGraphicsRAM
i7-960 Bloodfield 3.2GHz MSI X58 Pro-E LGA 1366 Intel ATX MSI N560GTX-Ti Twin Frozr II/OC GeForce GTX 560 G.SKILL Ripjaws Series 12GB (6 x 2GB) 240-Pin DDR3 
Hard DriveOSKeyboardPower
SAMSUNG Spinpoint 1TB 7200 RPM Windows 7 Home Premium Logitech G510 Antec 700W 
Case
Antec 902 V3 ATX Mid Tower 
  hide details  
Reply
First Build
(13 items)
 
  
CPUMotherboardGraphicsRAM
i7-960 Bloodfield 3.2GHz MSI X58 Pro-E LGA 1366 Intel ATX MSI N560GTX-Ti Twin Frozr II/OC GeForce GTX 560 G.SKILL Ripjaws Series 12GB (6 x 2GB) 240-Pin DDR3 
Hard DriveOSKeyboardPower
SAMSUNG Spinpoint 1TB 7200 RPM Windows 7 Home Premium Logitech G510 Antec 700W 
Case
Antec 902 V3 ATX Mid Tower 
  hide details  
Reply
post #8 of 20
Best Buy has only one PSU that's under $100 that is also a somewhat decent temporary purchase: the GS600:

http://www.bestbuy.com/site/Corsair+...&skuId=1073679
It's a computer!
(19 items)
 
  
CPUMotherboardGraphicsRAM
i5-2500K @ 4.5GHz (1.368-1.384V fixed voltage) ASUS P8P67 EVO B3 (UEFI ver. 1850) GTX 780 ASUS DirectCU II (1228 / 6300, 1.180V) G.SKILL Ripjaws X 8GB (2 x 4GB) 1866MHz, CL9 
Hard DriveHard DriveHard DriveOptical Drive
250 GB Samsung 840 EVO (C:\) 250 GB Samsung 840 EVO (D:\) 150 GB WD VelociRaptor Samsung SH-S243N 24x DVD Burner 
Optical DriveCoolingOSMonitor
Samsung SH-S203N 20X DVD Burner Thermaltake Frio Win 7 Home Premium x64 SP1 Retail AOC G2460PG (24" 1920 x 1080 144Hz G-SYNC) 
KeyboardPowerCaseMouse
Filco Majestouch 104-key Cherry MX Blues w/NKRO Corsair HX650 (Bronze, ordered on 12-12-2009) CM 690 Intellimouse Optical (1.1A) 1000Hz polling rate 
Mouse PadAudioAudio
Basic, but premium round X-Fi Titanium HD Klipsch ProMedia 2.1 (with 16 AWG Monster Cable... 
  hide details  
Reply
It's a computer!
(19 items)
 
  
CPUMotherboardGraphicsRAM
i5-2500K @ 4.5GHz (1.368-1.384V fixed voltage) ASUS P8P67 EVO B3 (UEFI ver. 1850) GTX 780 ASUS DirectCU II (1228 / 6300, 1.180V) G.SKILL Ripjaws X 8GB (2 x 4GB) 1866MHz, CL9 
Hard DriveHard DriveHard DriveOptical Drive
250 GB Samsung 840 EVO (C:\) 250 GB Samsung 840 EVO (D:\) 150 GB WD VelociRaptor Samsung SH-S243N 24x DVD Burner 
Optical DriveCoolingOSMonitor
Samsung SH-S203N 20X DVD Burner Thermaltake Frio Win 7 Home Premium x64 SP1 Retail AOC G2460PG (24" 1920 x 1080 144Hz G-SYNC) 
KeyboardPowerCaseMouse
Filco Majestouch 104-key Cherry MX Blues w/NKRO Corsair HX650 (Bronze, ordered on 12-12-2009) CM 690 Intellimouse Optical (1.1A) 1000Hz polling rate 
Mouse PadAudioAudio
Basic, but premium round X-Fi Titanium HD Klipsch ProMedia 2.1 (with 16 AWG Monster Cable... 
  hide details  
Reply
post #9 of 20
Make sure that you plugged in the 8 pin power connector on your board, four of the pins should be covered with a black plastic cap, if your using a 500w supply plug your 4 pin connector into the 4 uncapped pins. But keep in mind a fully configured setup (more than 1 video card) will require use of the 8 pin connector for the additional load on power supply, to connect 8 pin simply remove the cap on the 4 capped pins on 8 pin connector.

Hope this helps....
post #10 of 20
Thread Starter 
I have the pin removed right now and have both four pin connectors plugged in. Could that be a problem? Either way is this a result of not having enough power from PSU?
First Build
(13 items)
 
  
CPUMotherboardGraphicsRAM
i7-960 Bloodfield 3.2GHz MSI X58 Pro-E LGA 1366 Intel ATX MSI N560GTX-Ti Twin Frozr II/OC GeForce GTX 560 G.SKILL Ripjaws Series 12GB (6 x 2GB) 240-Pin DDR3 
Hard DriveOSKeyboardPower
SAMSUNG Spinpoint 1TB 7200 RPM Windows 7 Home Premium Logitech G510 Antec 700W 
Case
Antec 902 V3 ATX Mid Tower 
  hide details  
Reply
First Build
(13 items)
 
  
CPUMotherboardGraphicsRAM
i7-960 Bloodfield 3.2GHz MSI X58 Pro-E LGA 1366 Intel ATX MSI N560GTX-Ti Twin Frozr II/OC GeForce GTX 560 G.SKILL Ripjaws Series 12GB (6 x 2GB) 240-Pin DDR3 
Hard DriveOSKeyboardPower
SAMSUNG Spinpoint 1TB 7200 RPM Windows 7 Home Premium Logitech G510 Antec 700W 
Case
Antec 902 V3 ATX Mid Tower 
  hide details  
Reply
New Posts  All Forums:Forum Nav:
  Return Home
  Back to Forum: Intel BIOS
Overclock.net › Forums › Intel › Intel Motherboards › Intel BIOS › Booting Issue - Please Assist