Overclock.net › Forums › Intel › Intel CPUs › [Official] The Sandy Stable Club **Guides, Voltages, Temps & BIOS Templates** Inc SPREADSHEET
New Posts  All Forums:Forum Nav:

[Official] The Sandy Stable Club **Guides, Voltages, Temps & BIOS Templates** Inc SPREADSHEET - Page 148

post #1471 of 10702
Thread Starter 
Quote:
Originally Posted by ocococ View Post
ok I think i've given up the science project. I turned off HT to keep temps down for 4.8 and I'd rather have HT on. I enabled PLL but with the Asus sleep bug, I'll have to forgo that as well. And between 4.5 and 4.6, I need to jump the vcore from 1.30 (or lower) up to 1.355. I'm not sure the extra 100-200mhz is worth it (i know...that's a blasphemous statement in this club). I'm going to settle for 4.5Ghz, have Sleep working and keep my temps low.

Thanks for all the help thus far.
I would personally keep the temps below 80c if you can with that cooler, until you invest in better cooling than just leave it where it is

Not really a blasphemous statement, this aint the 'squeeze every last thing you can from the chip club' lol it's the 'whatever your content with club' each to their own I say

EDIT: So far 53 members

So come on guys I know a lot of are priming atleast 12hrs to check your overclock
Edited by munaim1 - 7/1/11 at 12:08pm
it looks alive
(17 items)
 
Sandy Transformed
(69 photos)
 
CPUMotherboardGraphicsRAM
i5 2500K [5ghz 1.44v 24/7] Asus Maximus IV Extreme SLI GTX 460 @ 920/1840/4100 [1.11v] 4GB Dominator GT @ 2133mhz CL8 [1.65v] 
Hard DriveHard DriveCoolingOS
Intel X25-M G2 80GB 3x Samsung F3 500GB RAID 0 EK Supreme HF Full Copper Windows 7 Ultimate 64bit 
MonitorPowerCaseAudio
LG42SL9500 42" 1080p [Surround Soon] XFX XXX Edition 650w Xigmatec Elysium JVC HA-RX700 [foam mod] 
  hide details  
Reply
it looks alive
(17 items)
 
Sandy Transformed
(69 photos)
 
CPUMotherboardGraphicsRAM
i5 2500K [5ghz 1.44v 24/7] Asus Maximus IV Extreme SLI GTX 460 @ 920/1840/4100 [1.11v] 4GB Dominator GT @ 2133mhz CL8 [1.65v] 
Hard DriveHard DriveCoolingOS
Intel X25-M G2 80GB 3x Samsung F3 500GB RAID 0 EK Supreme HF Full Copper Windows 7 Ultimate 64bit 
MonitorPowerCaseAudio
LG42SL9500 42" 1080p [Surround Soon] XFX XXX Edition 650w Xigmatec Elysium JVC HA-RX700 [foam mod] 
  hide details  
Reply
post #1472 of 10702
Quote:
Originally Posted by munaim1 View Post
Lethal

Manged a suicide run yet? lol
Nah I'm a failure.
The Wtfer
(13 items)
 
  
CPUMotherboardGraphicsRAM
Core i7 2600K ASUS P8Z68-V PRO EVGA GTX 465 w/ 470 Shaders/Memory/Clocks 8GB G.Skill DDR3 1866 
Hard DriveOptical DriveOSMonitor
Samsung F3 1TB LG 22X DVD±R DVD Burner Windows 7 Professional 64-Bit Dell U2311H + LG W2242S 
PowerCase
Corsair 750TX Coolermaster RC-692 Advanced 
  hide details  
Reply
The Wtfer
(13 items)
 
  
CPUMotherboardGraphicsRAM
Core i7 2600K ASUS P8Z68-V PRO EVGA GTX 465 w/ 470 Shaders/Memory/Clocks 8GB G.Skill DDR3 1866 
Hard DriveOptical DriveOSMonitor
Samsung F3 1TB LG 22X DVD±R DVD Burner Windows 7 Professional 64-Bit Dell U2311H + LG W2242S 
PowerCase
Corsair 750TX Coolermaster RC-692 Advanced 
  hide details  
Reply
post #1473 of 10702
Thread Starter 
Quote:
Originally Posted by LethalRise750 View Post
Nah I'm a failure.
you'll get there eventually lol Im gonna try with the 57x multi tonight, last time I did it bsod at the loading windows screen, imthinking a bit more voltage should do it but I have to be careful though.
it looks alive
(17 items)
 
Sandy Transformed
(69 photos)
 
CPUMotherboardGraphicsRAM
i5 2500K [5ghz 1.44v 24/7] Asus Maximus IV Extreme SLI GTX 460 @ 920/1840/4100 [1.11v] 4GB Dominator GT @ 2133mhz CL8 [1.65v] 
Hard DriveHard DriveCoolingOS
Intel X25-M G2 80GB 3x Samsung F3 500GB RAID 0 EK Supreme HF Full Copper Windows 7 Ultimate 64bit 
MonitorPowerCaseAudio
LG42SL9500 42" 1080p [Surround Soon] XFX XXX Edition 650w Xigmatec Elysium JVC HA-RX700 [foam mod] 
  hide details  
Reply
it looks alive
(17 items)
 
Sandy Transformed
(69 photos)
 
CPUMotherboardGraphicsRAM
i5 2500K [5ghz 1.44v 24/7] Asus Maximus IV Extreme SLI GTX 460 @ 920/1840/4100 [1.11v] 4GB Dominator GT @ 2133mhz CL8 [1.65v] 
Hard DriveHard DriveCoolingOS
Intel X25-M G2 80GB 3x Samsung F3 500GB RAID 0 EK Supreme HF Full Copper Windows 7 Ultimate 64bit 
MonitorPowerCaseAudio
LG42SL9500 42" 1080p [Surround Soon] XFX XXX Edition 650w Xigmatec Elysium JVC HA-RX700 [foam mod] 
  hide details  
Reply
post #1474 of 10702
Quote:
Originally Posted by munaim1 View Post
you'll get there eventually lol Im gonna try with the 57x multi tonight, last time I did it bsod at the loading windows screen, imthinking a bit more voltage should do it but I have to be careful though.
My problem is it just freezes at the windows logo... I can get into Safe mode tho lol.. It doesn't even show any error in Event Viewer or report any BSOD.
The Wtfer
(13 items)
 
  
CPUMotherboardGraphicsRAM
Core i7 2600K ASUS P8Z68-V PRO EVGA GTX 465 w/ 470 Shaders/Memory/Clocks 8GB G.Skill DDR3 1866 
Hard DriveOptical DriveOSMonitor
Samsung F3 1TB LG 22X DVD±R DVD Burner Windows 7 Professional 64-Bit Dell U2311H + LG W2242S 
PowerCase
Corsair 750TX Coolermaster RC-692 Advanced 
  hide details  
Reply
The Wtfer
(13 items)
 
  
CPUMotherboardGraphicsRAM
Core i7 2600K ASUS P8Z68-V PRO EVGA GTX 465 w/ 470 Shaders/Memory/Clocks 8GB G.Skill DDR3 1866 
Hard DriveOptical DriveOSMonitor
Samsung F3 1TB LG 22X DVD±R DVD Burner Windows 7 Professional 64-Bit Dell U2311H + LG W2242S 
PowerCase
Corsair 750TX Coolermaster RC-692 Advanced 
  hide details  
Reply
post #1475 of 10702
I wish my chip had been a lil' better. Having to use PLL overvoltage at anything over 4.4ghz blows. Anyway, when I get a new video card (RMAed ), I'll make sure to run the 12 hour and post. I think I can get away with 4.6 @ 1.360V but we'll see (medium LLC calibration gives me a fairly steady 1.360V). I seem to have bad luck with ocing potential (cpu + gpu).
Edited by Infinite Jest - 7/1/11 at 2:32pm
post #1476 of 10702
Hi, I'm looking for stability with my 2500k but I can't make it more than 5 mins with prime.
I'm using similar voltage to you guys, but I can't pass not even 30 mins... so that makes me think it's something to do with the other voltages.
I'm new to intel, I've always been an amd boy... so I don't know much about ocing i5s/i7s.
Could anyone post your other voltages? So I can have a guide at least...

BTW, I'm going for 5.1ghz. CPU is a 2500k, motherboard is a asus p8p67 deluxe.
I have watercooling, so my temps never reach 60 in any core.
My PC
(14 items)
 
  
CPUMotherboardGraphicsRAM
i7 2600k @ 4.6ghz Asus P8Z68-M PRO EVGA GTX 580 G. Skill Sniper 2x4GB 1866Mhz 8-8-8-24 
Hard DriveOptical DriveCoolingOS
2 x Crucial M4 64gb sata3 RAID 0 + ST500gb + WD... Asus DVDRW sata Corsair H80 Win7 x64 Professional -genuine- 
MonitorKeyboardPowerCase
Dell 2408wfp Rev. A02 Razer Lycosa CoolerMaster Silent Pro M 700 Lian Li PC-V600F 
MouseMouse Pad
Microsoft Sidewinder X8 Razer 
  hide details  
Reply
My PC
(14 items)
 
  
CPUMotherboardGraphicsRAM
i7 2600k @ 4.6ghz Asus P8Z68-M PRO EVGA GTX 580 G. Skill Sniper 2x4GB 1866Mhz 8-8-8-24 
Hard DriveOptical DriveCoolingOS
2 x Crucial M4 64gb sata3 RAID 0 + ST500gb + WD... Asus DVDRW sata Corsair H80 Win7 x64 Professional -genuine- 
MonitorKeyboardPowerCase
Dell 2408wfp Rev. A02 Razer Lycosa CoolerMaster Silent Pro M 700 Lian Li PC-V600F 
MouseMouse Pad
Microsoft Sidewinder X8 Razer 
  hide details  
Reply
post #1477 of 10702
Quote:
Originally Posted by PeL4 View Post
Hi, I'm looking for stability with my 2500k but I can't make it more than 5 mins with prime.
I'm using similar voltage to you guys, but I can't pass not even 30 mins... so that makes me think it's something to do with the other voltages.
I'm new to intel, I've always been an amd boy... so I don't know much about ocing i5s/i7s.
Could anyone post your other voltages? So I can have a guide at least...

BTW, I'm going for 5.1ghz. CPU is a 2500k, motherboard is a asus p8p67 deluxe.
I have watercooling, so my temps never reach 60 in any core.
This may help unless you have already seen it.
post #1478 of 10702
Quote:
Originally Posted by THE_WITCHERâ„¢ View Post
Why everybody needs more than 1.35vcore to achieve 4.7mhz on the 2600k and i run prime yesterday for 2 hours with 1.32vcore with no problems ?

is there some chips like this or i have to run prime for 24hours lol.

You probably just have a better chip. Your 4.5 voltages are probably lower than most as well. Always depends on the processor you get. Some people get good ones, most people get the average ones.
post #1479 of 10702
Quote:
Originally Posted by Infinite Jest View Post
This may help unless you have already seen it.
Thanks, I read that guide and tried with those values, but it got worse... more unstable, didn't even last a minute with prime.
I changed a few voltages and I'm now running prime for almost an hour at 5ghz... but I need 1.504v on load to keep it stable.
According to the table in the first page, most of you get 5ghz with 1.488v or less. Do I have a bad chip?
My PC
(14 items)
 
  
CPUMotherboardGraphicsRAM
i7 2600k @ 4.6ghz Asus P8Z68-M PRO EVGA GTX 580 G. Skill Sniper 2x4GB 1866Mhz 8-8-8-24 
Hard DriveOptical DriveCoolingOS
2 x Crucial M4 64gb sata3 RAID 0 + ST500gb + WD... Asus DVDRW sata Corsair H80 Win7 x64 Professional -genuine- 
MonitorKeyboardPowerCase
Dell 2408wfp Rev. A02 Razer Lycosa CoolerMaster Silent Pro M 700 Lian Li PC-V600F 
MouseMouse Pad
Microsoft Sidewinder X8 Razer 
  hide details  
Reply
My PC
(14 items)
 
  
CPUMotherboardGraphicsRAM
i7 2600k @ 4.6ghz Asus P8Z68-M PRO EVGA GTX 580 G. Skill Sniper 2x4GB 1866Mhz 8-8-8-24 
Hard DriveOptical DriveCoolingOS
2 x Crucial M4 64gb sata3 RAID 0 + ST500gb + WD... Asus DVDRW sata Corsair H80 Win7 x64 Professional -genuine- 
MonitorKeyboardPowerCase
Dell 2408wfp Rev. A02 Razer Lycosa CoolerMaster Silent Pro M 700 Lian Li PC-V600F 
MouseMouse Pad
Microsoft Sidewinder X8 Razer 
  hide details  
Reply
post #1480 of 10702
Thread Starter 
Quote:
Originally Posted by PeL4 View Post
Thanks, I read that guide and tried with those values, but it got worse... more unstable, didn't even last a minute with prime.
I changed a few voltages and I'm now running prime for almost an hour at 5ghz... but I need 1.504v on load to keep it stable.
According to the table in the first page, most of you get 5ghz with 1.488v or less. Do I have a bad chip?
well to be fair there is only 6 entries that have 5ghz+, but I would say that maybe it's mediocre at best, im sure you can get 4.8ghz or something with way less voltage.


EDIT:

We need more sandybridge users!!!!
Come on guys and gals


EDIT2:

CPU-Z 1.58 is out, can someone with a gigabyte z68 mobo do me a favor and find out if the voltage is displayed correctly on the new one. Thanks

On that note, rules will be amended once I recieve the above info. CPU-Z 1.58 will take into affect from tomorrow.
Edited by munaim1 - 7/2/11 at 10:56am
it looks alive
(17 items)
 
Sandy Transformed
(69 photos)
 
CPUMotherboardGraphicsRAM
i5 2500K [5ghz 1.44v 24/7] Asus Maximus IV Extreme SLI GTX 460 @ 920/1840/4100 [1.11v] 4GB Dominator GT @ 2133mhz CL8 [1.65v] 
Hard DriveHard DriveCoolingOS
Intel X25-M G2 80GB 3x Samsung F3 500GB RAID 0 EK Supreme HF Full Copper Windows 7 Ultimate 64bit 
MonitorPowerCaseAudio
LG42SL9500 42" 1080p [Surround Soon] XFX XXX Edition 650w Xigmatec Elysium JVC HA-RX700 [foam mod] 
  hide details  
Reply
it looks alive
(17 items)
 
Sandy Transformed
(69 photos)
 
CPUMotherboardGraphicsRAM
i5 2500K [5ghz 1.44v 24/7] Asus Maximus IV Extreme SLI GTX 460 @ 920/1840/4100 [1.11v] 4GB Dominator GT @ 2133mhz CL8 [1.65v] 
Hard DriveHard DriveCoolingOS
Intel X25-M G2 80GB 3x Samsung F3 500GB RAID 0 EK Supreme HF Full Copper Windows 7 Ultimate 64bit 
MonitorPowerCaseAudio
LG42SL9500 42" 1080p [Surround Soon] XFX XXX Edition 650w Xigmatec Elysium JVC HA-RX700 [foam mod] 
  hide details  
Reply
New Posts  All Forums:Forum Nav:
  Return Home
  Back to Forum: Intel CPUs
  • [Official] The Sandy Stable Club **Guides, Voltages, Temps & BIOS Templates** Inc SPREADSHEET
Overclock.net › Forums › Intel › Intel CPUs › [Official] The Sandy Stable Club **Guides, Voltages, Temps & BIOS Templates** Inc SPREADSHEET