Overclock.net › Forums › Intel › Intel CPUs › [Official] The Sandy Stable Club **Guides, Voltages, Temps & BIOS Templates** Inc SPREADSHEET
New Posts  All Forums:Forum Nav:

[Official] The Sandy Stable Club **Guides, Voltages, Temps & BIOS Templates** Inc SPREADSHEET - Page 168

post #1671 of 10699
delete please
Edited by beetlespin - 7/13/11 at 11:14am
My System
(14 items)
 
  
CPUMotherboardGraphicsRAM
i5 2500k 4.5GHZ 1.33Vcore Asus P8P67 Deluxe B3 GIGABYTE 570 GTX 13I Rev2 G Skill 1600 2x2 set 
Hard DriveCoolingOSMonitor
kingston hyperx 3k  xspc rs 240 kit windows 7 64bit 22" viewsomic hd led 
Power
Seasonic x750 
  hide details  
Reply
My System
(14 items)
 
  
CPUMotherboardGraphicsRAM
i5 2500k 4.5GHZ 1.33Vcore Asus P8P67 Deluxe B3 GIGABYTE 570 GTX 13I Rev2 G Skill 1600 2x2 set 
Hard DriveCoolingOSMonitor
kingston hyperx 3k  xspc rs 240 kit windows 7 64bit 22" viewsomic hd led 
Power
Seasonic x750 
  hide details  
Reply
post #1672 of 10699
4.9 hgz prime95 12 hours at 1.45 volt set in bios with LLC 6 vdrop 1.44. It did stay between 1.44-1.45.
My System
(14 items)
 
  
CPUMotherboardGraphicsRAM
i5 2500k 4.5GHZ 1.33Vcore Asus P8P67 Deluxe B3 GIGABYTE 570 GTX 13I Rev2 G Skill 1600 2x2 set 
Hard DriveCoolingOSMonitor
kingston hyperx 3k  xspc rs 240 kit windows 7 64bit 22" viewsomic hd led 
Power
Seasonic x750 
  hide details  
Reply
My System
(14 items)
 
  
CPUMotherboardGraphicsRAM
i5 2500k 4.5GHZ 1.33Vcore Asus P8P67 Deluxe B3 GIGABYTE 570 GTX 13I Rev2 G Skill 1600 2x2 set 
Hard DriveCoolingOSMonitor
kingston hyperx 3k  xspc rs 240 kit windows 7 64bit 22" viewsomic hd led 
Power
Seasonic x750 
  hide details  
Reply
post #1673 of 10699
Thread Starter 
beetlespin added - Copy and paste this in sig
Code:

[CENTER][SIZE="3"][B][THREAD=968053][FONT="Book Antiqua"][:clock:] The Sandy STABLE Club [:clock:][/FONT][/THREAD][/B][/SIZE][/CENTER] 



Spreadsheet Updated

Spreadsheet now contains cooling info and a new sheet has been created for that aswell.

All club members double check that your cooling info is correct from when you took your screenshot

Also thanks to all that contributed to this thread and spreadsheet, we currently have just over 60 members and we are looking for MORE
SO GET POSTING GUYS!!!!

it looks alive
(17 items)
 
Sandy Transformed
(69 photos)
 
CPUMotherboardGraphicsRAM
i5 2500K [5ghz 1.44v 24/7] Asus Maximus IV Extreme SLI GTX 460 @ 920/1840/4100 [1.11v] 4GB Dominator GT @ 2133mhz CL8 [1.65v] 
Hard DriveHard DriveCoolingOS
Intel X25-M G2 80GB 3x Samsung F3 500GB RAID 0 EK Supreme HF Full Copper Windows 7 Ultimate 64bit 
MonitorPowerCaseAudio
LG42SL9500 42" 1080p [Surround Soon] XFX XXX Edition 650w Xigmatec Elysium JVC HA-RX700 [foam mod] 
  hide details  
Reply
it looks alive
(17 items)
 
Sandy Transformed
(69 photos)
 
CPUMotherboardGraphicsRAM
i5 2500K [5ghz 1.44v 24/7] Asus Maximus IV Extreme SLI GTX 460 @ 920/1840/4100 [1.11v] 4GB Dominator GT @ 2133mhz CL8 [1.65v] 
Hard DriveHard DriveCoolingOS
Intel X25-M G2 80GB 3x Samsung F3 500GB RAID 0 EK Supreme HF Full Copper Windows 7 Ultimate 64bit 
MonitorPowerCaseAudio
LG42SL9500 42" 1080p [Surround Soon] XFX XXX Edition 650w Xigmatec Elysium JVC HA-RX700 [foam mod] 
  hide details  
Reply
post #1674 of 10699
Tried this settings:

BCLK freq 100
Tur Rat: 50
Int PLL OV: Auto
Mem Freq: 1600
DRAM timming: 9-11-9-28-2T

Power Control:
VCore OWM mode: Extreme
VCore Load-Line Calibration: 75%
VRM Freq: 350
VCore Phase Control: Extreme
Vcore Over-current protection: 120%

CPU Manual Volt: 1.450
DRAM Volt: 1.65
VCCSA Volt: Auto
VCCIO Volt: 1.1
CPU PLL Volt: Auto

C3/C6-Disabled
C1E-Disabled
EIST-Disabled

Ran bend for 1h and no problem max temp was 82 core 2, but after the 1h it kind hanged, like i had to stop prime95 to get the sys responding

edit1:ima try setting my CPU PLL volt to 1.7
edit2: did that and got a BSOD 124, increased my vcore to 1.460
Edited by supermiguel - 7/13/11 at 4:37pm
post #1675 of 10699
Thread Starter 
Quote:
Originally Posted by supermiguel View Post
Tried this settings:

BCLK freq 100
Tur Rat: 50
Int PLL OV: Auto
Mem Freq: 1600
DRAM timming: 9-11-9-28-2T

Power Control:
VCore OWM mode: Extreme
VCore Load-Line Calibration: 75%
VRM Freq: 350
VCore Phase Control: Extreme
Vcore Over-current protection: 120%

CPU Manual Volt: 1.450
DRAM Volt: 1.65
VCCSA Volt: Auto
VCCIO Volt: 1.1
CPU PLL Volt: Auto

C3/C6-Disabled
C1E-Disabled
EIST-Disabled

Ran bend for 1h and no problem max temp was 82 core 2, but after the 1h it kind hanged, like i had to stop prime95 to get the sys responding
enable c1e and eist and speedstep, it doesn't effect the overclock, try bumping the vcore one more and increase the vccio to 1.125 also try lowerng the pll voltage.

good luck
it looks alive
(17 items)
 
Sandy Transformed
(69 photos)
 
CPUMotherboardGraphicsRAM
i5 2500K [5ghz 1.44v 24/7] Asus Maximus IV Extreme SLI GTX 460 @ 920/1840/4100 [1.11v] 4GB Dominator GT @ 2133mhz CL8 [1.65v] 
Hard DriveHard DriveCoolingOS
Intel X25-M G2 80GB 3x Samsung F3 500GB RAID 0 EK Supreme HF Full Copper Windows 7 Ultimate 64bit 
MonitorPowerCaseAudio
LG42SL9500 42" 1080p [Surround Soon] XFX XXX Edition 650w Xigmatec Elysium JVC HA-RX700 [foam mod] 
  hide details  
Reply
it looks alive
(17 items)
 
Sandy Transformed
(69 photos)
 
CPUMotherboardGraphicsRAM
i5 2500K [5ghz 1.44v 24/7] Asus Maximus IV Extreme SLI GTX 460 @ 920/1840/4100 [1.11v] 4GB Dominator GT @ 2133mhz CL8 [1.65v] 
Hard DriveHard DriveCoolingOS
Intel X25-M G2 80GB 3x Samsung F3 500GB RAID 0 EK Supreme HF Full Copper Windows 7 Ultimate 64bit 
MonitorPowerCaseAudio
LG42SL9500 42" 1080p [Surround Soon] XFX XXX Edition 650w Xigmatec Elysium JVC HA-RX700 [foam mod] 
  hide details  
Reply
post #1676 of 10699
Quote:
Originally Posted by munaim1 View Post
enable c1e and eist and speedstep, it doesn't effect the overclock, try bumping the vcore one more and increase the vccio to 1.125 also try lowerng the pll voltage.

good luck
how low should i set my pll?
i made it 1.7 and vccio to 1.125 and it failed after 15 minutes. will bump the vcore a bit
Edited by supermiguel - 7/13/11 at 5:34pm
post #1677 of 10699
Thread Starter 
Quote:
Originally Posted by supermiguel View Post
how low should i set my pll?
i made it 1.7 and vccio to 1.125 and it failed after 15 minutes. will bump the vcore a bit
leave pll on auto for now, and just raise the vccio to 1.125 and bump the vcore up a notch. Hopefully that should get you to maybe 3/4hours, from there we can try a few different things.
it looks alive
(17 items)
 
Sandy Transformed
(69 photos)
 
CPUMotherboardGraphicsRAM
i5 2500K [5ghz 1.44v 24/7] Asus Maximus IV Extreme SLI GTX 460 @ 920/1840/4100 [1.11v] 4GB Dominator GT @ 2133mhz CL8 [1.65v] 
Hard DriveHard DriveCoolingOS
Intel X25-M G2 80GB 3x Samsung F3 500GB RAID 0 EK Supreme HF Full Copper Windows 7 Ultimate 64bit 
MonitorPowerCaseAudio
LG42SL9500 42" 1080p [Surround Soon] XFX XXX Edition 650w Xigmatec Elysium JVC HA-RX700 [foam mod] 
  hide details  
Reply
it looks alive
(17 items)
 
Sandy Transformed
(69 photos)
 
CPUMotherboardGraphicsRAM
i5 2500K [5ghz 1.44v 24/7] Asus Maximus IV Extreme SLI GTX 460 @ 920/1840/4100 [1.11v] 4GB Dominator GT @ 2133mhz CL8 [1.65v] 
Hard DriveHard DriveCoolingOS
Intel X25-M G2 80GB 3x Samsung F3 500GB RAID 0 EK Supreme HF Full Copper Windows 7 Ultimate 64bit 
MonitorPowerCaseAudio
LG42SL9500 42" 1080p [Surround Soon] XFX XXX Edition 650w Xigmatec Elysium JVC HA-RX700 [foam mod] 
  hide details  
Reply
post #1678 of 10699
Quote:
Originally Posted by munaim1 View Post
leave pll on auto for now, and just raise the vccio to 1.125 and bump the vcore up a notch. Hopefully that should get you to maybe 3/4hours, from there we can try a few different things.
did just that, vcore: 1.460 and i get a 0x101 after 1 minute of bend, lowered the vcore to 1.455 and same 0x101 after 1 minute of bend, lower it again to 1.450 and same 0x101.

Even made it 1.48 and same BSOD after 1 minute of bend.. Weird
Edited by supermiguel - 7/13/11 at 6:06pm
post #1679 of 10699
Thread Starter 
if your getting 101 error then you need to increase the vcore not reduce it. Using the same settings that got you to an hour, bump the vcore up twice and leave everything else on auto. You can adjust the vccio and pll later on.
it looks alive
(17 items)
 
Sandy Transformed
(69 photos)
 
CPUMotherboardGraphicsRAM
i5 2500K [5ghz 1.44v 24/7] Asus Maximus IV Extreme SLI GTX 460 @ 920/1840/4100 [1.11v] 4GB Dominator GT @ 2133mhz CL8 [1.65v] 
Hard DriveHard DriveCoolingOS
Intel X25-M G2 80GB 3x Samsung F3 500GB RAID 0 EK Supreme HF Full Copper Windows 7 Ultimate 64bit 
MonitorPowerCaseAudio
LG42SL9500 42" 1080p [Surround Soon] XFX XXX Edition 650w Xigmatec Elysium JVC HA-RX700 [foam mod] 
  hide details  
Reply
it looks alive
(17 items)
 
Sandy Transformed
(69 photos)
 
CPUMotherboardGraphicsRAM
i5 2500K [5ghz 1.44v 24/7] Asus Maximus IV Extreme SLI GTX 460 @ 920/1840/4100 [1.11v] 4GB Dominator GT @ 2133mhz CL8 [1.65v] 
Hard DriveHard DriveCoolingOS
Intel X25-M G2 80GB 3x Samsung F3 500GB RAID 0 EK Supreme HF Full Copper Windows 7 Ultimate 64bit 
MonitorPowerCaseAudio
LG42SL9500 42" 1080p [Surround Soon] XFX XXX Edition 650w Xigmatec Elysium JVC HA-RX700 [foam mod] 
  hide details  
Reply
post #1680 of 10699
Quote:
Originally Posted by munaim1 View Post
if your getting 101 error then you need to increase the vcore not reduce it. Using the same settings that got you to an hour, bump the vcore up twice and leave everything else on auto. You can adjust the vccio and pll later on.
i made it 1.490 and same thing... like i can get the system booted at 1.43 and bsod after 1 minute of bend.. u think it wants more?
New Posts  All Forums:Forum Nav:
  Return Home
  Back to Forum: Intel CPUs
  • [Official] The Sandy Stable Club **Guides, Voltages, Temps & BIOS Templates** Inc SPREADSHEET
Overclock.net › Forums › Intel › Intel CPUs › [Official] The Sandy Stable Club **Guides, Voltages, Temps & BIOS Templates** Inc SPREADSHEET