Overclock.net › Forums › Intel › Intel CPUs › [Official] The Sandy Stable Club **Guides, Voltages, Temps & BIOS Templates** Inc SPREADSHEET
New Posts  All Forums:Forum Nav:

[Official] The Sandy Stable Club **Guides, Voltages, Temps & BIOS Templates** Inc SPREADSHEET - Page 223

post #2221 of 10698
Quote:
Originally Posted by The Viper;14455451 
Yo bro what r u saying...with spread spectrum enabled you can run with lower volts then when you have it disabled???

I was testing all day today and found out I needed the same voltage setting in UEFI as before.
But in windows, prime and LinX load and the idle voltage moves differently than before.
Made my load voltage a bit lower somehow...
Still seems to be stable with LinX all ram + ffts 1334, 1792 runs with 6500mb ram.
But now I got 4.79 instead of 4.8, though.
I have to run long Prime blend over night.

Also I got to 5.411 with ss on. stock ram timings.
1937059.png

SuperPi @5.388 1M 7.010s
Should be in 6s if it's healthy but this isn't stable at all....
[ATTACH]222930[/ATTACH]
Edited by Tunagoblin - 8/3/11 at 7:55pm
i5 2500K GTX570HD
(14 items)
 
  
CPUMotherboardGraphicsRAM
i5 2500K @ 4.8GHz 1.384V AsRock P67 Extreme4 (B3) UEFI3.19 EVGA GTX 570HD SC 930/1950 G.Skill RipjawsX DDR3 PC12800 2x4GB@1866 9-10-9-28 
Hard DriveOptical DriveCoolingOS
Crucial M4 SSD 128GB, 1x 500GB WD, 2x1TB WD Samsung DL DVD Writer Noctua NH-D14 Windows 7 Ultimate 64Bit SP1 
MonitorKeyboardPowerCase
Asus VG248QE Steelseries 6GV2 Rosewill Capstone 650W Corsair 600T White 
MouseMouse Pad
Steelseries Sensei Steelseries Qck Mini 
  hide details  
Reply
i5 2500K GTX570HD
(14 items)
 
  
CPUMotherboardGraphicsRAM
i5 2500K @ 4.8GHz 1.384V AsRock P67 Extreme4 (B3) UEFI3.19 EVGA GTX 570HD SC 930/1950 G.Skill RipjawsX DDR3 PC12800 2x4GB@1866 9-10-9-28 
Hard DriveOptical DriveCoolingOS
Crucial M4 SSD 128GB, 1x 500GB WD, 2x1TB WD Samsung DL DVD Writer Noctua NH-D14 Windows 7 Ultimate 64Bit SP1 
MonitorKeyboardPowerCase
Asus VG248QE Steelseries 6GV2 Rosewill Capstone 650W Corsair 600T White 
MouseMouse Pad
Steelseries Sensei Steelseries Qck Mini 
  hide details  
Reply
post #2222 of 10698
Thread Starter 
Quote:
Originally Posted by Tunagoblin;14455579 
I was testing all day today and found out I needed the same voltage setting in UEFI as before.
But in windows, prime and LinX load and the idle voltage moves differently than before.
Made my load voltage a bit lower somehow...
Still seems to be stable with LinX all ram + ffts 1334, 1792 runs with 6500mb ram.
But now I got 4.79 instead of 4.8, though.
I have to run long Prime blend over night.

Also I got to 5.411 with ss on. stock ram timings.
1937059.png

SuperPi @5.388 1M 7.010s
Should be in 6s if it's healthy but this isn't stable at all....
[ATTACH]222930[/ATTACH]


Very nice bud. thumb.gif

I may just open a cpu-z section on the spredsheet lol Suicide runs tongue.gif
it looks alive
(17 items)
 
Sandy Transformed
(69 photos)
 
CPUMotherboardGraphicsRAM
i5 2500K [5ghz 1.44v 24/7] Asus Maximus IV Extreme SLI GTX 460 @ 920/1840/4100 [1.11v] 4GB Dominator GT @ 2133mhz CL8 [1.65v] 
Hard DriveHard DriveCoolingOS
Intel X25-M G2 80GB 3x Samsung F3 500GB RAID 0 EK Supreme HF Full Copper Windows 7 Ultimate 64bit 
MonitorPowerCaseAudio
LG42SL9500 42" 1080p [Surround Soon] XFX XXX Edition 650w Xigmatec Elysium JVC HA-RX700 [foam mod] 
  hide details  
Reply
it looks alive
(17 items)
 
Sandy Transformed
(69 photos)
 
CPUMotherboardGraphicsRAM
i5 2500K [5ghz 1.44v 24/7] Asus Maximus IV Extreme SLI GTX 460 @ 920/1840/4100 [1.11v] 4GB Dominator GT @ 2133mhz CL8 [1.65v] 
Hard DriveHard DriveCoolingOS
Intel X25-M G2 80GB 3x Samsung F3 500GB RAID 0 EK Supreme HF Full Copper Windows 7 Ultimate 64bit 
MonitorPowerCaseAudio
LG42SL9500 42" 1080p [Surround Soon] XFX XXX Edition 650w Xigmatec Elysium JVC HA-RX700 [foam mod] 
  hide details  
Reply
post #2223 of 10698
Quote:
Originally Posted by Tunagoblin;14455579 
Made my load voltage a bit lower somehow...

ok got it...so turning Spread Spectrum on gave u a lower load voltage, I noticed that too.

BTW: very nice SS run...good to see some suicide runs:)
My System
(13 items)
 
  
CPUMotherboardGraphicsRAM
2600k@4.8 ASUS P8P67 WS Revolution evga GTX 780 2x4gb G.Skill RipjawsX 
Hard DriveOSMonitorPower
Samsung 840 EVO Win 7 64 ASUS Corsair 850 HX 
Case
CM Storm Sniper Bk Ed. 
  hide details  
Reply
My System
(13 items)
 
  
CPUMotherboardGraphicsRAM
2600k@4.8 ASUS P8P67 WS Revolution evga GTX 780 2x4gb G.Skill RipjawsX 
Hard DriveOSMonitorPower
Samsung 840 EVO Win 7 64 ASUS Corsair 850 HX 
Case
CM Storm Sniper Bk Ed. 
  hide details  
Reply
post #2224 of 10698
Quote:
Originally Posted by munaim1;14455647 
Very nice bud. thumb.gif

I may just open a cpu-z section on the spredsheet lol Suicide runs tongue.gif

Man, the SB is hell of a chip.
Haven't had any chip that's more playable than this one.
Feel like playing super mario with 99 lives. tongue.gif
Well, I hope my chip won't go wheee.gif any time soon, though.
i5 2500K GTX570HD
(14 items)
 
  
CPUMotherboardGraphicsRAM
i5 2500K @ 4.8GHz 1.384V AsRock P67 Extreme4 (B3) UEFI3.19 EVGA GTX 570HD SC 930/1950 G.Skill RipjawsX DDR3 PC12800 2x4GB@1866 9-10-9-28 
Hard DriveOptical DriveCoolingOS
Crucial M4 SSD 128GB, 1x 500GB WD, 2x1TB WD Samsung DL DVD Writer Noctua NH-D14 Windows 7 Ultimate 64Bit SP1 
MonitorKeyboardPowerCase
Asus VG248QE Steelseries 6GV2 Rosewill Capstone 650W Corsair 600T White 
MouseMouse Pad
Steelseries Sensei Steelseries Qck Mini 
  hide details  
Reply
i5 2500K GTX570HD
(14 items)
 
  
CPUMotherboardGraphicsRAM
i5 2500K @ 4.8GHz 1.384V AsRock P67 Extreme4 (B3) UEFI3.19 EVGA GTX 570HD SC 930/1950 G.Skill RipjawsX DDR3 PC12800 2x4GB@1866 9-10-9-28 
Hard DriveOptical DriveCoolingOS
Crucial M4 SSD 128GB, 1x 500GB WD, 2x1TB WD Samsung DL DVD Writer Noctua NH-D14 Windows 7 Ultimate 64Bit SP1 
MonitorKeyboardPowerCase
Asus VG248QE Steelseries 6GV2 Rosewill Capstone 650W Corsair 600T White 
MouseMouse Pad
Steelseries Sensei Steelseries Qck Mini 
  hide details  
Reply
post #2225 of 10698
I'm just trying to get my PC stable right now, I have a question. Is getting max temps of 88C or so occasionally during Prime95 blend bad if I test the CPU for 12 hours?

It never gets that hot during normal use, it never tops the high 70's (at worst) then.

I'm just afraid to run my CPU in the high 70's and low 80's for 12 hours.
Plastic Shuriken
(17 items)
 
  
CPUMotherboardGraphicsRAM
Intel i5-2500k 4.4GHz ASRock P67 PRO3 NVIDIA GeForce GTX 560 Ti 8GB Corsair Vengeance 1600MHz 
Hard DriveHard DriveHard DriveHard Drive
128GB Crucial M4 SSD 1TB Seagate Barracuda 2TB Western Digital Caviar Black 500GB Samsung Spinpoint F3 
CoolingOSMonitorPower
Xigmatek Gaia  Windows 7 Ultimate 64-bit Samsung P2350 XFX PRO550W 
CaseMouse
Cooler Master CM 690II Advanced Logitech VX Nano 
  hide details  
Reply
Plastic Shuriken
(17 items)
 
  
CPUMotherboardGraphicsRAM
Intel i5-2500k 4.4GHz ASRock P67 PRO3 NVIDIA GeForce GTX 560 Ti 8GB Corsair Vengeance 1600MHz 
Hard DriveHard DriveHard DriveHard Drive
128GB Crucial M4 SSD 1TB Seagate Barracuda 2TB Western Digital Caviar Black 500GB Samsung Spinpoint F3 
CoolingOSMonitorPower
Xigmatek Gaia  Windows 7 Ultimate 64-bit Samsung P2350 XFX PRO550W 
CaseMouse
Cooler Master CM 690II Advanced Logitech VX Nano 
  hide details  
Reply
post #2226 of 10698
Thread Starter 
Quote:
Originally Posted by EliteGamer83;14456708 
I'm just trying to get my PC stable right now, I have a question. Is getting max temps of 88C or so occasionally during Prime95 blend bad if I test the CPU for 12 hours?

It never gets that hot during normal use, it never tops the high 70's (at worst) then.

I'm just afraid to run my CPU in the high 70's and low 80's for 12 hours.


Should be fine for stress testing, there are quite a few that got higher lol low 90s.
it looks alive
(17 items)
 
Sandy Transformed
(69 photos)
 
CPUMotherboardGraphicsRAM
i5 2500K [5ghz 1.44v 24/7] Asus Maximus IV Extreme SLI GTX 460 @ 920/1840/4100 [1.11v] 4GB Dominator GT @ 2133mhz CL8 [1.65v] 
Hard DriveHard DriveCoolingOS
Intel X25-M G2 80GB 3x Samsung F3 500GB RAID 0 EK Supreme HF Full Copper Windows 7 Ultimate 64bit 
MonitorPowerCaseAudio
LG42SL9500 42" 1080p [Surround Soon] XFX XXX Edition 650w Xigmatec Elysium JVC HA-RX700 [foam mod] 
  hide details  
Reply
it looks alive
(17 items)
 
Sandy Transformed
(69 photos)
 
CPUMotherboardGraphicsRAM
i5 2500K [5ghz 1.44v 24/7] Asus Maximus IV Extreme SLI GTX 460 @ 920/1840/4100 [1.11v] 4GB Dominator GT @ 2133mhz CL8 [1.65v] 
Hard DriveHard DriveCoolingOS
Intel X25-M G2 80GB 3x Samsung F3 500GB RAID 0 EK Supreme HF Full Copper Windows 7 Ultimate 64bit 
MonitorPowerCaseAudio
LG42SL9500 42" 1080p [Surround Soon] XFX XXX Edition 650w Xigmatec Elysium JVC HA-RX700 [foam mod] 
  hide details  
Reply
post #2227 of 10698
Add me please, I forgot to write my cooler type in the sticky note so Im adding a picture of my cooler

DSC03499.jpg
    
CPUMotherboardGraphicsGraphics
Intel® Core™ i7-5960X @ 4.5 GHz Asus Rampage V Extreme Asus GTX 1080 Strix Asus GTX 1080 Strix 
RAMHard DriveHard DriveHard Drive
16GB Dominator Platinum 3000 DDR4 Samsung 950 Pro NVM Express Seagate Barracuda XT 3TB 6.0Gb/s Intel 750 Series 1.2 Tb PCIE SSD 
CoolingOSMonitorKeyboard
Custom Loop EKWB  Windows 10 Home ASUS PB287Q UHD 4K Razer Black Widow Chroma 
PowerCaseMouseMouse Pad
Corsair AX1200i  Thermaltake Core W100 Razer Deathadder Chroma Corsair MM200 
AudioOther
Logitech Z323 2.1 Sound System Headphones Razer Kraken Pro White 
  hide details  
Reply
    
CPUMotherboardGraphicsGraphics
Intel® Core™ i7-5960X @ 4.5 GHz Asus Rampage V Extreme Asus GTX 1080 Strix Asus GTX 1080 Strix 
RAMHard DriveHard DriveHard Drive
16GB Dominator Platinum 3000 DDR4 Samsung 950 Pro NVM Express Seagate Barracuda XT 3TB 6.0Gb/s Intel 750 Series 1.2 Tb PCIE SSD 
CoolingOSMonitorKeyboard
Custom Loop EKWB  Windows 10 Home ASUS PB287Q UHD 4K Razer Black Widow Chroma 
PowerCaseMouseMouse Pad
Corsair AX1200i  Thermaltake Core W100 Razer Deathadder Chroma Corsair MM200 
AudioOther
Logitech Z323 2.1 Sound System Headphones Razer Kraken Pro White 
  hide details  
Reply
post #2228 of 10698
I think I am going to start from scratch, having some strange issues here. After multiple 12+ hour blend tests coming back stable, as soon as I disabled c6 last night I had a bsod in a bc2 session. I did a memtest (esc'd out of it early) and when the os came up it no longer recognized my video or usb headset drivers. I'm gonna reinstall my os tonight and work with a mild oc of 4.0 for maybe a week or so and see if I have any issues.

What I don't understand is how I can be having issues after ,multiple blend tests confirming stability...unless I am indeed having conflict issues because I did not reinstall my os after my board/proc/ram upgrade. I have done hardware upgrades many times in the past without issue, maybe this time something is conflicting and messing me up.
Edited by fuloran1 - 8/4/11 at 6:22am
post #2229 of 10698
Thread Starter 
mfranco702

Added to spreadsheet, nice overclock bud thumb.gif Thanks for contributing to the thread.


Grab your sig here, copy and paste it:

[php]
[THREAD=968053][post-flame-small.gif] The Sandy STABLE Club [post-flame-small.gif][/THREAD]
[/php]


Quote:
Originally Posted by fuloran1;14459814 
I did not reinstall my os after my board/proc/ram upgrade.

eek.gifeek.gif

It's always recommended to reinstall OS between platform changes and mobo changes so that issues like the ones that your having don't arise. That could more than likely be the root of your problem.
Edited by munaim1 - 8/4/11 at 9:32am
it looks alive
(17 items)
 
Sandy Transformed
(69 photos)
 
CPUMotherboardGraphicsRAM
i5 2500K [5ghz 1.44v 24/7] Asus Maximus IV Extreme SLI GTX 460 @ 920/1840/4100 [1.11v] 4GB Dominator GT @ 2133mhz CL8 [1.65v] 
Hard DriveHard DriveCoolingOS
Intel X25-M G2 80GB 3x Samsung F3 500GB RAID 0 EK Supreme HF Full Copper Windows 7 Ultimate 64bit 
MonitorPowerCaseAudio
LG42SL9500 42" 1080p [Surround Soon] XFX XXX Edition 650w Xigmatec Elysium JVC HA-RX700 [foam mod] 
  hide details  
Reply
it looks alive
(17 items)
 
Sandy Transformed
(69 photos)
 
CPUMotherboardGraphicsRAM
i5 2500K [5ghz 1.44v 24/7] Asus Maximus IV Extreme SLI GTX 460 @ 920/1840/4100 [1.11v] 4GB Dominator GT @ 2133mhz CL8 [1.65v] 
Hard DriveHard DriveCoolingOS
Intel X25-M G2 80GB 3x Samsung F3 500GB RAID 0 EK Supreme HF Full Copper Windows 7 Ultimate 64bit 
MonitorPowerCaseAudio
LG42SL9500 42" 1080p [Surround Soon] XFX XXX Edition 650w Xigmatec Elysium JVC HA-RX700 [foam mod] 
  hide details  
Reply
post #2230 of 10698
Quote:
Originally Posted by munaim1;14461603 
eek.gifeek.gif

It's always recommended to reinstall OS between platform changes and mobo changes so that issues like the ones that your having don't arise. That could more than likely be the root of your problem.

Heh, yeah I know it's "recommended", but honestly, I have upgraded many times without doing so and haven't had issues. I think that this time though, with upgrading to a whole new platform and all, it is giving me some issues. No worries, I will be reinstalling a fresh OS tonight.
New Posts  All Forums:Forum Nav:
  Return Home
  Back to Forum: Intel CPUs
  • [Official] The Sandy Stable Club **Guides, Voltages, Temps & BIOS Templates** Inc SPREADSHEET
Overclock.net › Forums › Intel › Intel CPUs › [Official] The Sandy Stable Club **Guides, Voltages, Temps & BIOS Templates** Inc SPREADSHEET