Overclock.net › Forums › Intel › Intel CPUs › [Official] The Sandy Stable Club **Guides, Voltages, Temps & BIOS Templates** Inc SPREADSHEET
New Posts  All Forums:Forum Nav:

[Official] The Sandy Stable Club **Guides, Voltages, Temps & BIOS Templates** Inc SPREADSHEET - Page 228

post #2271 of 10702
Thread Starter 
Quote:
Originally Posted by sintricate View Post
Any advice guys?
1.36 for 4.8ghz is pretty good however I would change a few things round before that though, like changing the bclk back down to 10 and trying to get that high with the multi, you mitgh need PLL overvoltage to get that multi working.

So how it goes when you set it up manually.

I recommend leaving these settings while you mess around with the CPU overclock:

DRAM: STOCK voltage and Timings.
Spread Spectrum - Enable (no need to changte that unless your messing with the BCLK or your bclk is fluctuating - BCLK shouldn't be changed unless your looking to squeeze every last fsb you can for a suicide run or something)

C1E: Enabled
Speedstep: Enabled
C3 Report: AUTO
C6 Report: AUTO
DUTY & Phase Control: Extrme
CPU current Capability: 140% (don't worry about the RED)
it looks alive
(17 items)
 
Sandy Transformed
(69 photos)
 
CPUMotherboardGraphicsRAM
i5 2500K [5ghz 1.44v 24/7] Asus Maximus IV Extreme SLI GTX 460 @ 920/1840/4100 [1.11v] 4GB Dominator GT @ 2133mhz CL8 [1.65v] 
Hard DriveHard DriveCoolingOS
Intel X25-M G2 80GB 3x Samsung F3 500GB RAID 0 EK Supreme HF Full Copper Windows 7 Ultimate 64bit 
MonitorPowerCaseAudio
LG42SL9500 42" 1080p [Surround Soon] XFX XXX Edition 650w Xigmatec Elysium JVC HA-RX700 [foam mod] 
  hide details  
Reply
it looks alive
(17 items)
 
Sandy Transformed
(69 photos)
 
CPUMotherboardGraphicsRAM
i5 2500K [5ghz 1.44v 24/7] Asus Maximus IV Extreme SLI GTX 460 @ 920/1840/4100 [1.11v] 4GB Dominator GT @ 2133mhz CL8 [1.65v] 
Hard DriveHard DriveCoolingOS
Intel X25-M G2 80GB 3x Samsung F3 500GB RAID 0 EK Supreme HF Full Copper Windows 7 Ultimate 64bit 
MonitorPowerCaseAudio
LG42SL9500 42" 1080p [Surround Soon] XFX XXX Edition 650w Xigmatec Elysium JVC HA-RX700 [foam mod] 
  hide details  
Reply
post #2272 of 10702
Is DUTY and Phase control 2 different options? I only see Phase control. I used those settings and I'm running prime right now. So far so good.. *cross fingers*
The SandBox
(14 items)
 
  
CPUMotherboardGraphicsRAM
Intel i7-2600k (5.3GHz Max) ASUS Maximus IV GENE-Z GTX 980 Ti SC+ BP 16GB G.SKILL Sniper 1600MHz 1.25v 4x4GB 
Hard DriveCoolingOSMonitor
Samsung 850 Pro 256 Corsair H80 Windows 7 Ultimate 64bit Asus PA279Q 
PowerCase
SeaSonic X Series X650 Gold Silverstone FT03B 
  hide details  
Reply
The SandBox
(14 items)
 
  
CPUMotherboardGraphicsRAM
Intel i7-2600k (5.3GHz Max) ASUS Maximus IV GENE-Z GTX 980 Ti SC+ BP 16GB G.SKILL Sniper 1600MHz 1.25v 4x4GB 
Hard DriveCoolingOSMonitor
Samsung 850 Pro 256 Corsair H80 Windows 7 Ultimate 64bit Asus PA279Q 
PowerCase
SeaSonic X Series X650 Gold Silverstone FT03B 
  hide details  
Reply
post #2273 of 10702
Quote:
Originally Posted by sintricate View Post
Is DUTY and Phase control 2 different options? I only see Phase control. I used those settings and I'm running prime right now. So far so good.. *cross fingers*
You got 16GB of ram and bringing up bclk to 104 is gonna be stressing ram a lot.
You might going to see problem on your GPU also since the bclk is up.
Or it could damage it.
You should back down the bclk and up the multi.
it is going to be safer and also you'll get better performance, too.
(turning on spread spectrum will make bclk @ 99.8 but it gives you better performance than upping bclk. That's what happened to me.)
i5 2500K GTX570HD
(14 items)
 
  
CPUMotherboardGraphicsRAM
i5 2500K @ 4.8GHz 1.384V AsRock P67 Extreme4 (B3) UEFI3.19 EVGA GTX 570HD SC 930/1950 G.Skill RipjawsX DDR3 PC12800 2x4GB@1866 9-10-9-28 
Hard DriveOptical DriveCoolingOS
Crucial M4 SSD 128GB, 1x 500GB WD, 2x1TB WD Samsung DL DVD Writer Noctua NH-D14 Windows 7 Ultimate 64Bit SP1 
MonitorKeyboardPowerCase
Asus VG248QE Steelseries 6GV2 Rosewill Capstone 650W Corsair 600T White 
MouseMouse Pad
Steelseries Sensei Steelseries Qck Mini 
  hide details  
Reply
i5 2500K GTX570HD
(14 items)
 
  
CPUMotherboardGraphicsRAM
i5 2500K @ 4.8GHz 1.384V AsRock P67 Extreme4 (B3) UEFI3.19 EVGA GTX 570HD SC 930/1950 G.Skill RipjawsX DDR3 PC12800 2x4GB@1866 9-10-9-28 
Hard DriveOptical DriveCoolingOS
Crucial M4 SSD 128GB, 1x 500GB WD, 2x1TB WD Samsung DL DVD Writer Noctua NH-D14 Windows 7 Ultimate 64Bit SP1 
MonitorKeyboardPowerCase
Asus VG248QE Steelseries 6GV2 Rosewill Capstone 650W Corsair 600T White 
MouseMouse Pad
Steelseries Sensei Steelseries Qck Mini 
  hide details  
Reply
post #2274 of 10702
Quote:
Originally Posted by munaim1 View Post
Hey Club members

Need to ask a small favour from you guys, now that you have your overclock stable, it would be greatly beneficial to ALL 1155 users on this forum to post your results in THIS thread.

It's a free to edit spreadsheet that allows you to input your data in and I would appreciate it if you guys could take a look and spare a couple minutes to fill it in.

It also helps non SB users to have a look at which 1155 mobo's are currently doing well and which are more popular than others.

MUCH APPRECIATED

How do I edit the spread sheet?
I can't figure it out....

Even though I'm OC and stuff, I'm a sooo analog/old school guy.
Fact1: I still use CRT! (21inch 75lb beast) never own a LCD anything.
Fact2: Never own any portable MP3 player nor laptop nor smart phone.
Fact3: I own more analog records than CDs.
Fact4: I never use headphones to listen to music/game. Stereo speakers only.
(Non of the 5.1 and stuff. 2.0 is still the best for music or even mono)
Fact4: Surprising but Mac is still my main computer.
i5 2500K GTX570HD
(14 items)
 
  
CPUMotherboardGraphicsRAM
i5 2500K @ 4.8GHz 1.384V AsRock P67 Extreme4 (B3) UEFI3.19 EVGA GTX 570HD SC 930/1950 G.Skill RipjawsX DDR3 PC12800 2x4GB@1866 9-10-9-28 
Hard DriveOptical DriveCoolingOS
Crucial M4 SSD 128GB, 1x 500GB WD, 2x1TB WD Samsung DL DVD Writer Noctua NH-D14 Windows 7 Ultimate 64Bit SP1 
MonitorKeyboardPowerCase
Asus VG248QE Steelseries 6GV2 Rosewill Capstone 650W Corsair 600T White 
MouseMouse Pad
Steelseries Sensei Steelseries Qck Mini 
  hide details  
Reply
i5 2500K GTX570HD
(14 items)
 
  
CPUMotherboardGraphicsRAM
i5 2500K @ 4.8GHz 1.384V AsRock P67 Extreme4 (B3) UEFI3.19 EVGA GTX 570HD SC 930/1950 G.Skill RipjawsX DDR3 PC12800 2x4GB@1866 9-10-9-28 
Hard DriveOptical DriveCoolingOS
Crucial M4 SSD 128GB, 1x 500GB WD, 2x1TB WD Samsung DL DVD Writer Noctua NH-D14 Windows 7 Ultimate 64Bit SP1 
MonitorKeyboardPowerCase
Asus VG248QE Steelseries 6GV2 Rosewill Capstone 650W Corsair 600T White 
MouseMouse Pad
Steelseries Sensei Steelseries Qck Mini 
  hide details  
Reply
post #2275 of 10702
(Based on ASUS P8P67 Pro or higher)
Hey guy's, for those wanting a bit of SB Overclocking help for around 4.8Ghz, set Multi to x48, BCLK to 100, Load-Line Calibration Very High, VRM Frequency Auto, Phase Control Extreme, Under phase control there is another option but i can't remember the name. "Something" control. It checks the Current and makes sure power is spread evenly. Set that to Extreme.

Save the reboot. Test the new overclock with prime95 small FFT for 12 hours min.
X79-GCN
(22 items)
 
  
CPUMotherboardGraphicsRAM
Intel 3930K 4.5GHz HT GIGABYTE GA-X79-UP4 AMD R9-290X GEil Evo Potenza DDR3 2400MHz CL10 (4x4GB) 
Hard DriveCoolingCoolingCooling
Samsung 840 Pro 120GB EK Supremacy (CPU) NF F12's P/P (360 Rad)  NF A14's (420 Rad)  
CoolingCoolingCoolingCooling
XSPC Chrome Compression Fittings EK RES X3 150 Primochill PremoFlex Advanced LRT Clear 1/2 ID EK-FC (R9 290X) 
CoolingCoolingCoolingOS
EK D5 Vario Top-X  Phobya G-Changer V2 360mm Phobya G-Changer V2 420mm Win 10 x64 Pro 
MonitorKeyboardPowerCase
BenQ XR3501 35" Curved Corsair Vengeance K90 Seasonic X-1250 Gold (v2) Corsair 900D 
MouseAudio
Logitech G400s Senn HD 598 
  hide details  
Reply
X79-GCN
(22 items)
 
  
CPUMotherboardGraphicsRAM
Intel 3930K 4.5GHz HT GIGABYTE GA-X79-UP4 AMD R9-290X GEil Evo Potenza DDR3 2400MHz CL10 (4x4GB) 
Hard DriveCoolingCoolingCooling
Samsung 840 Pro 120GB EK Supremacy (CPU) NF F12's P/P (360 Rad)  NF A14's (420 Rad)  
CoolingCoolingCoolingCooling
XSPC Chrome Compression Fittings EK RES X3 150 Primochill PremoFlex Advanced LRT Clear 1/2 ID EK-FC (R9 290X) 
CoolingCoolingCoolingOS
EK D5 Vario Top-X  Phobya G-Changer V2 360mm Phobya G-Changer V2 420mm Win 10 x64 Pro 
MonitorKeyboardPowerCase
BenQ XR3501 35" Curved Corsair Vengeance K90 Seasonic X-1250 Gold (v2) Corsair 900D 
MouseAudio
Logitech G400s Senn HD 598 
  hide details  
Reply
post #2276 of 10702
Quote:
Originally Posted by BradleyW View Post
(Based on ASUS P8P67 Pro or higher)
Hey guy's, for those wanting a bit of SB Overclocking help for around 4.8Ghz, set Multi to x48, BCLK to 100, Load-Line Calibration Very High, VRM Frequency Auto, Phase Control Extreme, Under phase control there is another option but i can't remember the name. "Something" control. It checks the Current and makes sure power is spread evenly. Set that to Extreme.

Save the reboot. Test the new overclock with prime95 small FFT for 12 hours min.
The most important settings aren't there!?
The vcore, vtt(vccio) and dram voltage...
Every systems work differently. Some chip can't even get to 4.8 period.
i5 2500K GTX570HD
(14 items)
 
  
CPUMotherboardGraphicsRAM
i5 2500K @ 4.8GHz 1.384V AsRock P67 Extreme4 (B3) UEFI3.19 EVGA GTX 570HD SC 930/1950 G.Skill RipjawsX DDR3 PC12800 2x4GB@1866 9-10-9-28 
Hard DriveOptical DriveCoolingOS
Crucial M4 SSD 128GB, 1x 500GB WD, 2x1TB WD Samsung DL DVD Writer Noctua NH-D14 Windows 7 Ultimate 64Bit SP1 
MonitorKeyboardPowerCase
Asus VG248QE Steelseries 6GV2 Rosewill Capstone 650W Corsair 600T White 
MouseMouse Pad
Steelseries Sensei Steelseries Qck Mini 
  hide details  
Reply
i5 2500K GTX570HD
(14 items)
 
  
CPUMotherboardGraphicsRAM
i5 2500K @ 4.8GHz 1.384V AsRock P67 Extreme4 (B3) UEFI3.19 EVGA GTX 570HD SC 930/1950 G.Skill RipjawsX DDR3 PC12800 2x4GB@1866 9-10-9-28 
Hard DriveOptical DriveCoolingOS
Crucial M4 SSD 128GB, 1x 500GB WD, 2x1TB WD Samsung DL DVD Writer Noctua NH-D14 Windows 7 Ultimate 64Bit SP1 
MonitorKeyboardPowerCase
Asus VG248QE Steelseries 6GV2 Rosewill Capstone 650W Corsair 600T White 
MouseMouse Pad
Steelseries Sensei Steelseries Qck Mini 
  hide details  
Reply
post #2277 of 10702
Whatever is not listed, leave it to auto and make sure your RAM is running at it's stcok speed, voltage and timings. You also wanna set Multi per core (Cannot be adjusted in OS). Vcore at 1.4V.
X79-GCN
(22 items)
 
  
CPUMotherboardGraphicsRAM
Intel 3930K 4.5GHz HT GIGABYTE GA-X79-UP4 AMD R9-290X GEil Evo Potenza DDR3 2400MHz CL10 (4x4GB) 
Hard DriveCoolingCoolingCooling
Samsung 840 Pro 120GB EK Supremacy (CPU) NF F12's P/P (360 Rad)  NF A14's (420 Rad)  
CoolingCoolingCoolingCooling
XSPC Chrome Compression Fittings EK RES X3 150 Primochill PremoFlex Advanced LRT Clear 1/2 ID EK-FC (R9 290X) 
CoolingCoolingCoolingOS
EK D5 Vario Top-X  Phobya G-Changer V2 360mm Phobya G-Changer V2 420mm Win 10 x64 Pro 
MonitorKeyboardPowerCase
BenQ XR3501 35" Curved Corsair Vengeance K90 Seasonic X-1250 Gold (v2) Corsair 900D 
MouseAudio
Logitech G400s Senn HD 598 
  hide details  
Reply
X79-GCN
(22 items)
 
  
CPUMotherboardGraphicsRAM
Intel 3930K 4.5GHz HT GIGABYTE GA-X79-UP4 AMD R9-290X GEil Evo Potenza DDR3 2400MHz CL10 (4x4GB) 
Hard DriveCoolingCoolingCooling
Samsung 840 Pro 120GB EK Supremacy (CPU) NF F12's P/P (360 Rad)  NF A14's (420 Rad)  
CoolingCoolingCoolingCooling
XSPC Chrome Compression Fittings EK RES X3 150 Primochill PremoFlex Advanced LRT Clear 1/2 ID EK-FC (R9 290X) 
CoolingCoolingCoolingOS
EK D5 Vario Top-X  Phobya G-Changer V2 360mm Phobya G-Changer V2 420mm Win 10 x64 Pro 
MonitorKeyboardPowerCase
BenQ XR3501 35" Curved Corsair Vengeance K90 Seasonic X-1250 Gold (v2) Corsair 900D 
MouseAudio
Logitech G400s Senn HD 598 
  hide details  
Reply
post #2278 of 10702
Quote:
Originally Posted by BradleyW View Post
Whatever is not listed, leave it to auto and make sure your RAM is running at it's stcok speed, voltage and timings. You also wanna set Multi per core (Cannot be adjusted in OS). Vcore at 1.4V.
Please don't recommend people to put Auto voltage...
Since it just gives way too much vcore to force it to be stable...
You always need to find out what the best and lowest vcore you can put into.
Same as vtt and dram.
Anyone can put 1.5vcore and make 4.5 stable (well.. maybe 1.5 is too much) but that is not how OC is done.
You have to make your system stable with right amount of voltages to everything.
i5 2500K GTX570HD
(14 items)
 
  
CPUMotherboardGraphicsRAM
i5 2500K @ 4.8GHz 1.384V AsRock P67 Extreme4 (B3) UEFI3.19 EVGA GTX 570HD SC 930/1950 G.Skill RipjawsX DDR3 PC12800 2x4GB@1866 9-10-9-28 
Hard DriveOptical DriveCoolingOS
Crucial M4 SSD 128GB, 1x 500GB WD, 2x1TB WD Samsung DL DVD Writer Noctua NH-D14 Windows 7 Ultimate 64Bit SP1 
MonitorKeyboardPowerCase
Asus VG248QE Steelseries 6GV2 Rosewill Capstone 650W Corsair 600T White 
MouseMouse Pad
Steelseries Sensei Steelseries Qck Mini 
  hide details  
Reply
i5 2500K GTX570HD
(14 items)
 
  
CPUMotherboardGraphicsRAM
i5 2500K @ 4.8GHz 1.384V AsRock P67 Extreme4 (B3) UEFI3.19 EVGA GTX 570HD SC 930/1950 G.Skill RipjawsX DDR3 PC12800 2x4GB@1866 9-10-9-28 
Hard DriveOptical DriveCoolingOS
Crucial M4 SSD 128GB, 1x 500GB WD, 2x1TB WD Samsung DL DVD Writer Noctua NH-D14 Windows 7 Ultimate 64Bit SP1 
MonitorKeyboardPowerCase
Asus VG248QE Steelseries 6GV2 Rosewill Capstone 650W Corsair 600T White 
MouseMouse Pad
Steelseries Sensei Steelseries Qck Mini 
  hide details  
Reply
post #2279 of 10702
Thread Starter 
Quote:
Originally Posted by Tunagoblin View Post
How do I edit the spread sheet?
I can't figure it out....
Not sure bud, you would have to ask in that thread.


Quote:
Originally Posted by BradleyW View Post
Test the new overclock with prime95 small FFT for 12 hours min.
Yet again:


Quote:
Originally Posted by munaim1 View Post
That's not true, with sandybridge its entirely different. Those that have fold for 24hours have failed prime blend with a few minutes, there are some that can pass AVX linkpack 50 times but fail within a couple minutes of prime blend, hence the creation of this thread and it's RULES.
Basically Blend is the best tester for sandybridge and you would be wasting your time with small ffts.

Best way to overclock sandy's is NOT by jumping straight to a multi and changing voltages here and there. It's a little more than that and usually requires a lot of patience. General consensus is working your way up from stock.
Edited by munaim1 - 8/5/11 at 8:42am
it looks alive
(17 items)
 
Sandy Transformed
(69 photos)
 
CPUMotherboardGraphicsRAM
i5 2500K [5ghz 1.44v 24/7] Asus Maximus IV Extreme SLI GTX 460 @ 920/1840/4100 [1.11v] 4GB Dominator GT @ 2133mhz CL8 [1.65v] 
Hard DriveHard DriveCoolingOS
Intel X25-M G2 80GB 3x Samsung F3 500GB RAID 0 EK Supreme HF Full Copper Windows 7 Ultimate 64bit 
MonitorPowerCaseAudio
LG42SL9500 42" 1080p [Surround Soon] XFX XXX Edition 650w Xigmatec Elysium JVC HA-RX700 [foam mod] 
  hide details  
Reply
it looks alive
(17 items)
 
Sandy Transformed
(69 photos)
 
CPUMotherboardGraphicsRAM
i5 2500K [5ghz 1.44v 24/7] Asus Maximus IV Extreme SLI GTX 460 @ 920/1840/4100 [1.11v] 4GB Dominator GT @ 2133mhz CL8 [1.65v] 
Hard DriveHard DriveCoolingOS
Intel X25-M G2 80GB 3x Samsung F3 500GB RAID 0 EK Supreme HF Full Copper Windows 7 Ultimate 64bit 
MonitorPowerCaseAudio
LG42SL9500 42" 1080p [Surround Soon] XFX XXX Edition 650w Xigmatec Elysium JVC HA-RX700 [foam mod] 
  hide details  
Reply
post #2280 of 10702
Quote:
Originally Posted by munaim1 View Post
1.36 for 4.8ghz is pretty good however I would change a few things round before that though, like changing the bclk back down to 10 and trying to get that high with the multi, you mitgh need PLL overvoltage to get that multi working.

So how it goes when you set it up manually.

I recommend leaving these settings while you mess around with the CPU overclock:

DRAM: STOCK voltage and Timings.
Spread Spectrum - Enable (no need to changte that unless your messing with the BCLK or your bclk is fluctuating - BCLK shouldn't be changed unless your looking to squeeze every last fsb you can for a suicide run or something)

C1E: Enabled
Speedstep: Enabled
C3 Report: AUTO
C6 Report: AUTO
DUTY & Phase Control: Extrme
CPU current Capability: 140% (don't worry about the RED)
I would not use spread spec at all. Mainly because you don't get pretty even numbers, and sometimes it might cause instability if it goes over 100blck.

Also, I won't use LLC at all. I would put it at Extreme, because at ultra high, it will actually run higher voltages on idle, and you will have to conpensate for the load voltage, because it will be lower. When you put it to extreme, you should put the voltage maybe 1 level down, because it will jump up under load.
Edited by tryceo - 8/5/11 at 9:36am
Project Chloe
(16 items)
 
  
CPUMotherboardGraphicsRAM
i5-2500k 4.4GHz 1.280v Fatal1ty Z68 Professional Gen3 MSI R6950 Twin Frozr III Corsair Vengence 8GB 1600MHz 
Hard DriveHard DriveOptical DriveOS
OCZ Vertex 4 Samsung Spinpoint F3 Asus 24X DVD Burner Windows 7 Ultimate 64bit 
MonitorMonitorKeyboardPower
ASUS VE228H ASUS VE228H Razor Blackwidow  Corsair 850HX 
CaseMouseMouse PadAudio
HAF X Logitech G500 Razer Goliathus Logitech G930 
  hide details  
Reply
Project Chloe
(16 items)
 
  
CPUMotherboardGraphicsRAM
i5-2500k 4.4GHz 1.280v Fatal1ty Z68 Professional Gen3 MSI R6950 Twin Frozr III Corsair Vengence 8GB 1600MHz 
Hard DriveHard DriveOptical DriveOS
OCZ Vertex 4 Samsung Spinpoint F3 Asus 24X DVD Burner Windows 7 Ultimate 64bit 
MonitorMonitorKeyboardPower
ASUS VE228H ASUS VE228H Razor Blackwidow  Corsair 850HX 
CaseMouseMouse PadAudio
HAF X Logitech G500 Razer Goliathus Logitech G930 
  hide details  
Reply
New Posts  All Forums:Forum Nav:
  Return Home
  Back to Forum: Intel CPUs
  • [Official] The Sandy Stable Club **Guides, Voltages, Temps & BIOS Templates** Inc SPREADSHEET
Overclock.net › Forums › Intel › Intel CPUs › [Official] The Sandy Stable Club **Guides, Voltages, Temps & BIOS Templates** Inc SPREADSHEET