Overclock.net › Forums › Intel › Intel CPUs › [Official] The Sandy Stable Club **Guides, Voltages, Temps & BIOS Templates** Inc SPREADSHEET
New Posts  All Forums:Forum Nav:

[Official] The Sandy Stable Club **Guides, Voltages, Temps & BIOS Templates** Inc SPREADSHEET - Page 30

post #291 of 10701
Quote:
Originally Posted by ChickenInferno View Post
No. In fact asus boards were automatically setting themselves to 103mhz with the first several bioses. Overclocking tends to be much easier at 100mhz though. Usually anyone messing with raising the baseclock can simply just raise the multiplier one.
Thanks buddy
I am thinking of dropping it back down to 100, but mainly to get my RAM back to 1600MHz from 1648MHz
I Like Smileys :)
(16 items)
 
Sony Vaio 1512
(9 items)
 
 
CPUMotherboardGraphicsRAM
Intel Core i7-2600K 4.6GHz Asus P8P67 Pro Bios 3207 MSI GTX 970 GAMING 4G Ripjaws-X 16GB 1600MHz 
Hard DriveHard DriveOptical DriveCooling
80GB Intel & 128GB 830  2 x WD640 Caviar Black LG DVD-RW Noctua NH-D14  
OSMonitorKeyboardPower
Windows 7 HP 64bit Acer 5906x1080 3D Logitech G15 Corsair TX850W 
CaseMouseMouse PadAudio
Antec Dark Fleet DF-85 Logitec G700 Razer Goliathus Sharkoon X-Tatic 5.1 Headset 
CPUMotherboardGraphicsRAM
Intel® Core™ i5-3210M Laptop  HD 4000 Corsair Vengeance 8GB  
Hard DriveOptical DriveOSMonitor
Samsung 840 250GB DVD Multi Windows 8 15.5 inch display (1366 x 768) 
Keyboard
LED Back lit 
  hide details  
Reply
I Like Smileys :)
(16 items)
 
Sony Vaio 1512
(9 items)
 
 
CPUMotherboardGraphicsRAM
Intel Core i7-2600K 4.6GHz Asus P8P67 Pro Bios 3207 MSI GTX 970 GAMING 4G Ripjaws-X 16GB 1600MHz 
Hard DriveHard DriveOptical DriveCooling
80GB Intel & 128GB 830  2 x WD640 Caviar Black LG DVD-RW Noctua NH-D14  
OSMonitorKeyboardPower
Windows 7 HP 64bit Acer 5906x1080 3D Logitech G15 Corsair TX850W 
CaseMouseMouse PadAudio
Antec Dark Fleet DF-85 Logitec G700 Razer Goliathus Sharkoon X-Tatic 5.1 Headset 
CPUMotherboardGraphicsRAM
Intel® Core™ i5-3210M Laptop  HD 4000 Corsair Vengeance 8GB  
Hard DriveOptical DriveOSMonitor
Samsung 840 250GB DVD Multi Windows 8 15.5 inch display (1366 x 768) 
Keyboard
LED Back lit 
  hide details  
Reply
post #292 of 10701
Well, I ended up backing my overclock down to 4.6GHz. At 4.7GHz, it was stable for normal usage, but BSOD'd sometime overnight during my Prime run. That was a 1.36v and Prime was pushing temps in the low 70s. So I decided to back it down a notch instead of pushing more voltage.

So now I'm at 46x, 1.330v vCore (or was it 1.335v? I'll verify it then), 1.750v PLL, and VTT back to Auto. It's 2 and a half hours into Prime, so I'm hoping it holds steady.
post #293 of 10701
Quote:
Originally Posted by Lost-boi View Post
WTF, you have a 2500k also at 4.6 but I need .1v more to be stable. WTF?
Why do I always get the power hungry chips!

Is the only voltage you touched the CPU voltage?
Yup, I set vcore to 1.3 and set my LLC to extreme.
My System
(13 items)
 
  
CPUMotherboardGraphicsRAM
i3 530 @ 4.0 EVGA H55 Sapphire 6850 OCZ 
Hard DriveOSMonitorKeyboard
Intel G2 80GB/Samsung F3 Windows 7 Ultimate 20" HP 2011x Logictech G15 
PowerCaseMouse
Coolermaster 900 UCP Coolermaster HAF 932 Logictech G5 
  hide details  
Reply
My System
(13 items)
 
  
CPUMotherboardGraphicsRAM
i3 530 @ 4.0 EVGA H55 Sapphire 6850 OCZ 
Hard DriveOSMonitorKeyboard
Intel G2 80GB/Samsung F3 Windows 7 Ultimate 20" HP 2011x Logictech G15 
PowerCaseMouse
Coolermaster 900 UCP Coolermaster HAF 932 Logictech G5 
  hide details  
Reply
post #294 of 10701
Quote:
Originally Posted by Swifty220 View Post
Yup, I set vcore to 1.3 and set my LLC to extreme.
I only have the option to turn LLC to enabled on my board.

Quote:
Originally Posted by cory1234 View Post
I wouldn't worry about it. He is running water which can affect the voltage required.
Im on water too
Mighty Mini
(13 items)
 
  
CPUMotherboardGraphicsRAM
2500k Z68 Gene Asus 970 Strix 8gigs Corsair Vengeance 
Hard DriveOptical DriveOSMonitor
Kingston HyperX 120gig Seagate Cuda 1TB W10 Acer 23" 1080p 
KeyboardPowerCaseMouse
G15 HX1000W NZXT Vulcan G9X 
  hide details  
Reply
Mighty Mini
(13 items)
 
  
CPUMotherboardGraphicsRAM
2500k Z68 Gene Asus 970 Strix 8gigs Corsair Vengeance 
Hard DriveOptical DriveOSMonitor
Kingston HyperX 120gig Seagate Cuda 1TB W10 Acer 23" 1080p 
KeyboardPowerCaseMouse
G15 HX1000W NZXT Vulcan G9X 
  hide details  
Reply
post #295 of 10701
Lost-boi

I was having problems with mine failing after 4-5 hours of prime, but it wouldn't fail on linx, even after 100 passes. I figured my ram timings were too tight (even though they were running at stock). I loosend mine to 9-9-9-28 and now she is over 9 hours prime stable and 20 passes of linx stable. That is good enough for me.
My System
(13 items)
 
  
CPUMotherboardGraphicsRAM
i3 530 @ 4.0 EVGA H55 Sapphire 6850 OCZ 
Hard DriveOSMonitorKeyboard
Intel G2 80GB/Samsung F3 Windows 7 Ultimate 20" HP 2011x Logictech G15 
PowerCaseMouse
Coolermaster 900 UCP Coolermaster HAF 932 Logictech G5 
  hide details  
Reply
My System
(13 items)
 
  
CPUMotherboardGraphicsRAM
i3 530 @ 4.0 EVGA H55 Sapphire 6850 OCZ 
Hard DriveOSMonitorKeyboard
Intel G2 80GB/Samsung F3 Windows 7 Ultimate 20" HP 2011x Logictech G15 
PowerCaseMouse
Coolermaster 900 UCP Coolermaster HAF 932 Logictech G5 
  hide details  
Reply
post #296 of 10701
Hey anyone have any recommendations for my settings I'm currently at 4.7 GHz
I'm using an ASUS P8P67 Pro board B3 Stepping with Bios 1305 or whatever the B3 boards came with.
VCCSA Voltage: 0.92500v
VCCIO Voltage: 1.00000v
CPU PLL Voltage: 1.80625v
Auto PLL Overvoltage: Auto
PCH Voltage: 1.10v
VRM Frequency: 360 or 350
Duty Control: Extreme
Phase Control: Extreme
Digi + VRM Load Line Calibration: Extreme
Digi + VRM Current Capability: 130%
CPU Multi 46/47
CPU BCLK: 102.1/100
CPU voltage: 1.425 in bios 1.44 idle, and 1.448v under load
DDR Voltage: 1.5v
Spread Spectrum: enabled

I had 47x with a BCLK of 100 the other day worked just fine but crapped out on a big adv unit so I switched to higher bclk and lower multi

Temps are 71C max while folding 78-80C max while using Prime 95 I'm using a 3-5 year old tube of Artic Silver 5 it was opened used and left 3/4 full with cap on it and has been sitting on the shelf for a couple years.
Edited by phazer11 - 4/1/11 at 7:53am
     
CPUGraphicsRAMHard Drive
Intel Core i7-3630QM NVIDIA GTX 670MX  DDR3 1600 MHz SDRAM 1TB 5400 RPM HGST Travelstar HDD 
Hard DriveOptical DriveOSMonitor
Corsair Neutron GTX 240GB Super-Multi DVD Writer Microsoft Windows 8 64-bit 17.3" HD LED-Backlit Display 
Mouse
Touchpad 
  hide details  
Reply
     
CPUGraphicsRAMHard Drive
Intel Core i7-3630QM NVIDIA GTX 670MX  DDR3 1600 MHz SDRAM 1TB 5400 RPM HGST Travelstar HDD 
Hard DriveOptical DriveOSMonitor
Corsair Neutron GTX 240GB Super-Multi DVD Writer Microsoft Windows 8 64-bit 17.3" HD LED-Backlit Display 
Mouse
Touchpad 
  hide details  
Reply
post #297 of 10701
Quote:
Originally Posted by Swifty220 View Post
Lost-boi

I was having problems with mine failing after 4-5 hours of prime, but it wouldn't fail on linx, even after 100 passes. I figured my ram timings were too tight (even though they were running at stock). I loosend mine to 9-9-9-28 and now she is over 9 hours prime stable and 20 passes of linx stable. That is good enough for me.
Mine stock are 9-9-9-24.
What does my ram timing have to do with my CPU needing higher voltage?
Mighty Mini
(13 items)
 
  
CPUMotherboardGraphicsRAM
2500k Z68 Gene Asus 970 Strix 8gigs Corsair Vengeance 
Hard DriveOptical DriveOSMonitor
Kingston HyperX 120gig Seagate Cuda 1TB W10 Acer 23" 1080p 
KeyboardPowerCaseMouse
G15 HX1000W NZXT Vulcan G9X 
  hide details  
Reply
Mighty Mini
(13 items)
 
  
CPUMotherboardGraphicsRAM
2500k Z68 Gene Asus 970 Strix 8gigs Corsair Vengeance 
Hard DriveOptical DriveOSMonitor
Kingston HyperX 120gig Seagate Cuda 1TB W10 Acer 23" 1080p 
KeyboardPowerCaseMouse
G15 HX1000W NZXT Vulcan G9X 
  hide details  
Reply
post #298 of 10701
Maybe they were saying it helped keep it stable at a lower voltage?
     
CPUGraphicsRAMHard Drive
Intel Core i7-3630QM NVIDIA GTX 670MX  DDR3 1600 MHz SDRAM 1TB 5400 RPM HGST Travelstar HDD 
Hard DriveOptical DriveOSMonitor
Corsair Neutron GTX 240GB Super-Multi DVD Writer Microsoft Windows 8 64-bit 17.3" HD LED-Backlit Display 
Mouse
Touchpad 
  hide details  
Reply
     
CPUGraphicsRAMHard Drive
Intel Core i7-3630QM NVIDIA GTX 670MX  DDR3 1600 MHz SDRAM 1TB 5400 RPM HGST Travelstar HDD 
Hard DriveOptical DriveOSMonitor
Corsair Neutron GTX 240GB Super-Multi DVD Writer Microsoft Windows 8 64-bit 17.3" HD LED-Backlit Display 
Mouse
Touchpad 
  hide details  
Reply
post #299 of 10701
Quote:
Originally Posted by Swifty220 View Post
Lost-boi

I was having problems with mine failing after 4-5 hours of prime, but it wouldn't fail on linx, even after 100 passes. I figured my ram timings were too tight (even though they were running at stock). I loosend mine to 9-9-9-28 and now she is over 9 hours prime stable and 20 passes of linx stable. That is good enough for me.
What were the timings before?
Scorpion
(14 items)
 
  
CPUMotherboardGraphicsRAM
Intel Core i7 2500K Gigabyte GA-Z68X-UD3H-B3 MSI GeForce GTX 580 Lightning Corsair Vengeance 8GB DDR3-1600 CL9 
Hard DriveOptical DriveOSMonitor
OCZ Agility 2 120GB Samsung SH-S223L DVD-RW Windows 7 Professional 64-Bit AOC e2243Fwk 21.5" LED 
KeyboardPowerCaseMouse
XArmor U9 Mechanical Corsair HX850 Corsair Carbide Series 500R Logitech G500 
Mouse PadAudio
Nova Gaming Winner 3 Realtek ALC889 Codec 
  hide details  
Reply
Scorpion
(14 items)
 
  
CPUMotherboardGraphicsRAM
Intel Core i7 2500K Gigabyte GA-Z68X-UD3H-B3 MSI GeForce GTX 580 Lightning Corsair Vengeance 8GB DDR3-1600 CL9 
Hard DriveOptical DriveOSMonitor
OCZ Agility 2 120GB Samsung SH-S223L DVD-RW Windows 7 Professional 64-Bit AOC e2243Fwk 21.5" LED 
KeyboardPowerCaseMouse
XArmor U9 Mechanical Corsair HX850 Corsair Carbide Series 500R Logitech G500 
Mouse PadAudio
Nova Gaming Winner 3 Realtek ALC889 Codec 
  hide details  
Reply
post #300 of 10701
IDK though hopefully it'd be somewhere around like mine is 9-9-9-24-2T
     
CPUGraphicsRAMHard Drive
Intel Core i7-3630QM NVIDIA GTX 670MX  DDR3 1600 MHz SDRAM 1TB 5400 RPM HGST Travelstar HDD 
Hard DriveOptical DriveOSMonitor
Corsair Neutron GTX 240GB Super-Multi DVD Writer Microsoft Windows 8 64-bit 17.3" HD LED-Backlit Display 
Mouse
Touchpad 
  hide details  
Reply
     
CPUGraphicsRAMHard Drive
Intel Core i7-3630QM NVIDIA GTX 670MX  DDR3 1600 MHz SDRAM 1TB 5400 RPM HGST Travelstar HDD 
Hard DriveOptical DriveOSMonitor
Corsair Neutron GTX 240GB Super-Multi DVD Writer Microsoft Windows 8 64-bit 17.3" HD LED-Backlit Display 
Mouse
Touchpad 
  hide details  
Reply
New Posts  All Forums:Forum Nav:
  Return Home
  Back to Forum: Intel CPUs
  • [Official] The Sandy Stable Club **Guides, Voltages, Temps & BIOS Templates** Inc SPREADSHEET
Overclock.net › Forums › Intel › Intel CPUs › [Official] The Sandy Stable Club **Guides, Voltages, Temps & BIOS Templates** Inc SPREADSHEET