Overclock.net › Forums › Intel › Intel CPUs › [Official] The Sandy Stable Club **Guides, Voltages, Temps & BIOS Templates** Inc SPREADSHEET
New Posts  All Forums:Forum Nav:

[Official] The Sandy Stable Club **Guides, Voltages, Temps & BIOS Templates** Inc SPREADSHEET - Page 309

post #3081 of 10702
Can I join the club.

12hr.png



Yeah my vcore is probably a bit high at that speed compared to others but hey can't win them all tongue.gif. The cpu pll discussion is interesting though and i'll probably fiddle around with that to see if i can drop my vcore.
Edited by Blizzfury - 8/23/11 at 8:32am
post #3082 of 10702
Thread Starter 
Blizzfury

Added to the spreadsheet, welcome to the club thumb.gif

Just a couple things, your vcore is higher than what you set in the BIOS, do you have extreme 100% LLC set? if so I would recommend reducing it to ultra high and increasing the vcore to compensate what is erquired for your overclock, on that note 1.432v does seem a little high, did you try reducing it?

Also temps are actually looking quite good for that vcore, you're the first on the list with the h1000.

Con gratz biggrin.gif


Grab your sig and wear it proudly smile.gif

[php]
[THREAD=968053][post-flame-small.gif] The Sandy STABLE Club [post-flame-small.gif][/THREAD]
[/php]


BIOS TEMPLATES

I have created a sheet for BIOS templates, it could be a reference point to other's including oneself and a quick 'copy and paste' whenever required in other threads/posts etc.

Those that have posted their stable systems please spare a few minutes of your time to do this. One more thing, these are the ones im after:
  • Main BIOS page (The advanced settings main page)

  • Full AI tweaker Page including DRAM Timing control

  • CPU Configuration Page

it looks alive
(17 items)
 
Sandy Transformed
(69 photos)
 
CPUMotherboardGraphicsRAM
i5 2500K [5ghz 1.44v 24/7] Asus Maximus IV Extreme SLI GTX 460 @ 920/1840/4100 [1.11v] 4GB Dominator GT @ 2133mhz CL8 [1.65v] 
Hard DriveHard DriveCoolingOS
Intel X25-M G2 80GB 3x Samsung F3 500GB RAID 0 EK Supreme HF Full Copper Windows 7 Ultimate 64bit 
MonitorPowerCaseAudio
LG42SL9500 42" 1080p [Surround Soon] XFX XXX Edition 650w Xigmatec Elysium JVC HA-RX700 [foam mod] 
  hide details  
Reply
it looks alive
(17 items)
 
Sandy Transformed
(69 photos)
 
CPUMotherboardGraphicsRAM
i5 2500K [5ghz 1.44v 24/7] Asus Maximus IV Extreme SLI GTX 460 @ 920/1840/4100 [1.11v] 4GB Dominator GT @ 2133mhz CL8 [1.65v] 
Hard DriveHard DriveCoolingOS
Intel X25-M G2 80GB 3x Samsung F3 500GB RAID 0 EK Supreme HF Full Copper Windows 7 Ultimate 64bit 
MonitorPowerCaseAudio
LG42SL9500 42" 1080p [Surround Soon] XFX XXX Edition 650w Xigmatec Elysium JVC HA-RX700 [foam mod] 
  hide details  
Reply
post #3083 of 10702
Are my temps ok? 38c Idle, 56c Blend Test. 3.8Ghz Turbo with 1.24vcore.
How do i flash my bios to 1850? I have the file on my desktop.
X79-GCN
(22 items)
 
  
CPUMotherboardGraphicsRAM
Intel 3930K 4.5GHz HT GIGABYTE GA-X79-UP4 AMD R9-290X GEil Evo Potenza DDR3 2400MHz CL10 (4x4GB) 
Hard DriveCoolingCoolingCooling
Samsung 840 Pro 120GB EK Supremacy (CPU) NF F12's P/P (360 Rad)  NF A14's (420 Rad)  
CoolingCoolingCoolingCooling
XSPC Chrome Compression Fittings EK RES X3 150 Primochill PremoFlex Advanced LRT Clear 1/2 ID EK-FC (R9 290X) 
CoolingCoolingCoolingOS
EK D5 Vario Top-X  Phobya G-Changer V2 360mm Phobya G-Changer V2 420mm Win 10 x64 Pro 
MonitorKeyboardPowerCase
BenQ XR3501 35" Curved Corsair Vengeance K90 Seasonic X-1250 Gold (v2) Corsair 900D 
MouseAudio
Logitech G400s Senn HD 598 
  hide details  
Reply
X79-GCN
(22 items)
 
  
CPUMotherboardGraphicsRAM
Intel 3930K 4.5GHz HT GIGABYTE GA-X79-UP4 AMD R9-290X GEil Evo Potenza DDR3 2400MHz CL10 (4x4GB) 
Hard DriveCoolingCoolingCooling
Samsung 840 Pro 120GB EK Supremacy (CPU) NF F12's P/P (360 Rad)  NF A14's (420 Rad)  
CoolingCoolingCoolingCooling
XSPC Chrome Compression Fittings EK RES X3 150 Primochill PremoFlex Advanced LRT Clear 1/2 ID EK-FC (R9 290X) 
CoolingCoolingCoolingOS
EK D5 Vario Top-X  Phobya G-Changer V2 360mm Phobya G-Changer V2 420mm Win 10 x64 Pro 
MonitorKeyboardPowerCase
BenQ XR3501 35" Curved Corsair Vengeance K90 Seasonic X-1250 Gold (v2) Corsair 900D 
MouseAudio
Logitech G400s Senn HD 598 
  hide details  
Reply
post #3084 of 10702
Thread Starter 
Quote:
Originally Posted by BradleyW;14685245 
Are my temps ok? 38c Idle, 56c Blend Test. 3.8Ghz Turbo with 1.24vcore.
How do i flash my bios to 1850? I have the file on my desktop.

sounds normal, you should be able to flash through your HDD. extract the file in the C:\ and then go into the bios and select EZ flash utility and then it's all pretty simple from there.

IMG_9934.png
it looks alive
(17 items)
 
Sandy Transformed
(69 photos)
 
CPUMotherboardGraphicsRAM
i5 2500K [5ghz 1.44v 24/7] Asus Maximus IV Extreme SLI GTX 460 @ 920/1840/4100 [1.11v] 4GB Dominator GT @ 2133mhz CL8 [1.65v] 
Hard DriveHard DriveCoolingOS
Intel X25-M G2 80GB 3x Samsung F3 500GB RAID 0 EK Supreme HF Full Copper Windows 7 Ultimate 64bit 
MonitorPowerCaseAudio
LG42SL9500 42" 1080p [Surround Soon] XFX XXX Edition 650w Xigmatec Elysium JVC HA-RX700 [foam mod] 
  hide details  
Reply
it looks alive
(17 items)
 
Sandy Transformed
(69 photos)
 
CPUMotherboardGraphicsRAM
i5 2500K [5ghz 1.44v 24/7] Asus Maximus IV Extreme SLI GTX 460 @ 920/1840/4100 [1.11v] 4GB Dominator GT @ 2133mhz CL8 [1.65v] 
Hard DriveHard DriveCoolingOS
Intel X25-M G2 80GB 3x Samsung F3 500GB RAID 0 EK Supreme HF Full Copper Windows 7 Ultimate 64bit 
MonitorPowerCaseAudio
LG42SL9500 42" 1080p [Surround Soon] XFX XXX Edition 650w Xigmatec Elysium JVC HA-RX700 [foam mod] 
  hide details  
Reply
post #3085 of 10702
EZ Flash, i forgot all about that. Glad to hear my temps are fine with the silver arrow. Thank you.

Edit: Bios reports 45c idle but realtemp reports 38c at 1.24v. Then again, the CPU is being used to an extent to power the interface ect.

That goes to my next question, does this mean my vid is 1.24v? Is that a good vid?
Edited by BradleyW - 8/23/11 at 8:45am
X79-GCN
(22 items)
 
  
CPUMotherboardGraphicsRAM
Intel 3930K 4.5GHz HT GIGABYTE GA-X79-UP4 AMD R9-290X GEil Evo Potenza DDR3 2400MHz CL10 (4x4GB) 
Hard DriveCoolingCoolingCooling
Samsung 840 Pro 120GB EK Supremacy (CPU) NF F12's P/P (360 Rad)  NF A14's (420 Rad)  
CoolingCoolingCoolingCooling
XSPC Chrome Compression Fittings EK RES X3 150 Primochill PremoFlex Advanced LRT Clear 1/2 ID EK-FC (R9 290X) 
CoolingCoolingCoolingOS
EK D5 Vario Top-X  Phobya G-Changer V2 360mm Phobya G-Changer V2 420mm Win 10 x64 Pro 
MonitorKeyboardPowerCase
BenQ XR3501 35" Curved Corsair Vengeance K90 Seasonic X-1250 Gold (v2) Corsair 900D 
MouseAudio
Logitech G400s Senn HD 598 
  hide details  
Reply
X79-GCN
(22 items)
 
  
CPUMotherboardGraphicsRAM
Intel 3930K 4.5GHz HT GIGABYTE GA-X79-UP4 AMD R9-290X GEil Evo Potenza DDR3 2400MHz CL10 (4x4GB) 
Hard DriveCoolingCoolingCooling
Samsung 840 Pro 120GB EK Supremacy (CPU) NF F12's P/P (360 Rad)  NF A14's (420 Rad)  
CoolingCoolingCoolingCooling
XSPC Chrome Compression Fittings EK RES X3 150 Primochill PremoFlex Advanced LRT Clear 1/2 ID EK-FC (R9 290X) 
CoolingCoolingCoolingOS
EK D5 Vario Top-X  Phobya G-Changer V2 360mm Phobya G-Changer V2 420mm Win 10 x64 Pro 
MonitorKeyboardPowerCase
BenQ XR3501 35" Curved Corsair Vengeance K90 Seasonic X-1250 Gold (v2) Corsair 900D 
MouseAudio
Logitech G400s Senn HD 598 
  hide details  
Reply
post #3086 of 10702
Thread Starter 
Quote:
Originally Posted by BradleyW;14685301 
EZ Flash, i forgot all about that. Glad to hear my temps are fine with the silver arrow. Thank you.

No worries, it would be better if you overclock it and then compare the temps with those in the spreadsheet thumb.gif
it looks alive
(17 items)
 
Sandy Transformed
(69 photos)
 
CPUMotherboardGraphicsRAM
i5 2500K [5ghz 1.44v 24/7] Asus Maximus IV Extreme SLI GTX 460 @ 920/1840/4100 [1.11v] 4GB Dominator GT @ 2133mhz CL8 [1.65v] 
Hard DriveHard DriveCoolingOS
Intel X25-M G2 80GB 3x Samsung F3 500GB RAID 0 EK Supreme HF Full Copper Windows 7 Ultimate 64bit 
MonitorPowerCaseAudio
LG42SL9500 42" 1080p [Surround Soon] XFX XXX Edition 650w Xigmatec Elysium JVC HA-RX700 [foam mod] 
  hide details  
Reply
it looks alive
(17 items)
 
Sandy Transformed
(69 photos)
 
CPUMotherboardGraphicsRAM
i5 2500K [5ghz 1.44v 24/7] Asus Maximus IV Extreme SLI GTX 460 @ 920/1840/4100 [1.11v] 4GB Dominator GT @ 2133mhz CL8 [1.65v] 
Hard DriveHard DriveCoolingOS
Intel X25-M G2 80GB 3x Samsung F3 500GB RAID 0 EK Supreme HF Full Copper Windows 7 Ultimate 64bit 
MonitorPowerCaseAudio
LG42SL9500 42" 1080p [Surround Soon] XFX XXX Edition 650w Xigmatec Elysium JVC HA-RX700 [foam mod] 
  hide details  
Reply
post #3087 of 10702
Someone is saying my temps are too high and they have a similar cooler and at 4.5Ghz. May need to reseat.
Just checked the spreadsheet.
franktitude 4600.2mhz 1.312v 13hrs 72-76-77-72 AIR - Noctua NH-D14 2600k HT
I will use this as a template.
Edited by BradleyW - 8/23/11 at 8:57am
X79-GCN
(22 items)
 
  
CPUMotherboardGraphicsRAM
Intel 3930K 4.5GHz HT GIGABYTE GA-X79-UP4 AMD R9-290X GEil Evo Potenza DDR3 2400MHz CL10 (4x4GB) 
Hard DriveCoolingCoolingCooling
Samsung 840 Pro 120GB EK Supremacy (CPU) NF F12's P/P (360 Rad)  NF A14's (420 Rad)  
CoolingCoolingCoolingCooling
XSPC Chrome Compression Fittings EK RES X3 150 Primochill PremoFlex Advanced LRT Clear 1/2 ID EK-FC (R9 290X) 
CoolingCoolingCoolingOS
EK D5 Vario Top-X  Phobya G-Changer V2 360mm Phobya G-Changer V2 420mm Win 10 x64 Pro 
MonitorKeyboardPowerCase
BenQ XR3501 35" Curved Corsair Vengeance K90 Seasonic X-1250 Gold (v2) Corsair 900D 
MouseAudio
Logitech G400s Senn HD 598 
  hide details  
Reply
X79-GCN
(22 items)
 
  
CPUMotherboardGraphicsRAM
Intel 3930K 4.5GHz HT GIGABYTE GA-X79-UP4 AMD R9-290X GEil Evo Potenza DDR3 2400MHz CL10 (4x4GB) 
Hard DriveCoolingCoolingCooling
Samsung 840 Pro 120GB EK Supremacy (CPU) NF F12's P/P (360 Rad)  NF A14's (420 Rad)  
CoolingCoolingCoolingCooling
XSPC Chrome Compression Fittings EK RES X3 150 Primochill PremoFlex Advanced LRT Clear 1/2 ID EK-FC (R9 290X) 
CoolingCoolingCoolingOS
EK D5 Vario Top-X  Phobya G-Changer V2 360mm Phobya G-Changer V2 420mm Win 10 x64 Pro 
MonitorKeyboardPowerCase
BenQ XR3501 35" Curved Corsair Vengeance K90 Seasonic X-1250 Gold (v2) Corsair 900D 
MouseAudio
Logitech G400s Senn HD 598 
  hide details  
Reply
post #3088 of 10702
Has anyone had better results raising PLL? Also I noticed raising my VTT too much caused problems. I haven't had problems at the stock 1.050 but many people keep saying to raise it... when it comes to these 2 settings I really feel like I am 100% guessing.

Does anyone else feel the 1344 is random, can you guys actually pass it every time?

Also, am I supposed to be running the 1344 with high ram usage like the Blend test? I know munaim1 said just change the 15 to 1 min cycles, but I want to be sure.

EDIT: HOW did I miss this?!?! In bold and red font!!
Quote:
Originally Posted by munaim1;14664224 
Just run a standard blend test or with 90% of your RAM, when you start worrying about particular FFT's there is more to it than people think. THEY ARE NOT CONSISTANT which basically means their not that reliable, however if they work for you then great, but if you get wierd crap happening then leave the FFT's and just concentrate on the blend test.

^^^ my experience ^^^
Edited by donkrx - 8/23/11 at 9:08am
    
CPUMotherboardGraphicsRAM
i5-2500K [24/7: 4.9ghz 1.47v] ASRock P67 Extreme 4 (B3) EVGA Geforce 570 [890/2200 1.1v] G.Skill Ripjaws 2x4GB 1600Mhz 
Hard DriveMonitorPowerCase
WD Caviar Black 1TB HP f2105 1680x1050 Corsair TX750 V2 (backup Antec BP550W) Antec 902 
Mouse
Logitech G500 
  hide details  
Reply
    
CPUMotherboardGraphicsRAM
i5-2500K [24/7: 4.9ghz 1.47v] ASRock P67 Extreme 4 (B3) EVGA Geforce 570 [890/2200 1.1v] G.Skill Ripjaws 2x4GB 1600Mhz 
Hard DriveMonitorPowerCase
WD Caviar Black 1TB HP f2105 1680x1050 Corsair TX750 V2 (backup Antec BP550W) Antec 902 
Mouse
Logitech G500 
  hide details  
Reply
post #3089 of 10702
Thread Starter 
Quote:
Originally Posted by donkrx;14685535 
Has anyone had better results raising PLL? Also I noticed raising my VTT too much caused problems. I haven't had problems at the stock 1.050 but many people keep saying to raise it... when it comes to these 2 settings I really feel like I am 100% guessing.

Does anyone else feel the 1344 is random, can you guys actually pass it every time?

Also, am I supposed to be running the 1344 with high ram usage like the Blend test? I know munaim1 said just change the 15 to 1 min cycles, but I want to be sure.

I don't think many have raised PLL voltage, VTT (VCCCIO) should only be used if your overclocking your RAM, or when you have populated all four dimm slots, under those conditions it can help with stability, other than that it should be left alone, but again raising it a little to around 1.125/1.15v can help.

I have tried to explain how those FFTs can be random, you can pass one day and then fail the next with exactly the same settings. At that point my advice would be just do a normal custom blend test with your available RAM.

1344 with all RAM would be better, better you're increasing the chances of bsoding therefore more 'tweaking' may be required. Those FFT's are apparently the hardest, so try not to create scenerios were you're trying to make it fail, instead make it a goal to pass the 12hour custom blend with all you RAM, before going OCD on those FFTs tongue.gif
it looks alive
(17 items)
 
Sandy Transformed
(69 photos)
 
CPUMotherboardGraphicsRAM
i5 2500K [5ghz 1.44v 24/7] Asus Maximus IV Extreme SLI GTX 460 @ 920/1840/4100 [1.11v] 4GB Dominator GT @ 2133mhz CL8 [1.65v] 
Hard DriveHard DriveCoolingOS
Intel X25-M G2 80GB 3x Samsung F3 500GB RAID 0 EK Supreme HF Full Copper Windows 7 Ultimate 64bit 
MonitorPowerCaseAudio
LG42SL9500 42" 1080p [Surround Soon] XFX XXX Edition 650w Xigmatec Elysium JVC HA-RX700 [foam mod] 
  hide details  
Reply
it looks alive
(17 items)
 
Sandy Transformed
(69 photos)
 
CPUMotherboardGraphicsRAM
i5 2500K [5ghz 1.44v 24/7] Asus Maximus IV Extreme SLI GTX 460 @ 920/1840/4100 [1.11v] 4GB Dominator GT @ 2133mhz CL8 [1.65v] 
Hard DriveHard DriveCoolingOS
Intel X25-M G2 80GB 3x Samsung F3 500GB RAID 0 EK Supreme HF Full Copper Windows 7 Ultimate 64bit 
MonitorPowerCaseAudio
LG42SL9500 42" 1080p [Surround Soon] XFX XXX Edition 650w Xigmatec Elysium JVC HA-RX700 [foam mod] 
  hide details  
Reply
post #3090 of 10702
Quote:
Originally Posted by munaim1;14685240 
Just a couple things, your vcore is higher than what you set in the BIOS, do you have extreme 100% LLC set? if so I would recommend reducing it to ultra high and increasing the vcore to compensate what is erquired for your overclock, on that note 1.432v does seem a little high, did you try reducing it?

Also temps are actually looking quite good for that vcore, you're the first on the list with the h1000.

Con gratz biggrin.gif

Thanks!

Just checked, LLC is set to Ultra high but the vcore was actually 1.430 in the bios haha. I could had sworn it was at 1.425 headscratch.gif

As for the high vcore I went about 9hrs with blend and 7gb ram at 1.420 before blue screen, so I just bumped the vcore (twice apparently tongue.gif).
New Posts  All Forums:Forum Nav:
  Return Home
  Back to Forum: Intel CPUs
  • [Official] The Sandy Stable Club **Guides, Voltages, Temps & BIOS Templates** Inc SPREADSHEET
Overclock.net › Forums › Intel › Intel CPUs › [Official] The Sandy Stable Club **Guides, Voltages, Temps & BIOS Templates** Inc SPREADSHEET