Overclock.net › Forums › Intel › Intel CPUs › [Official] The Sandy Stable Club **Guides, Voltages, Temps & BIOS Templates** Inc SPREADSHEET
New Posts  All Forums:Forum Nav:

[Official] The Sandy Stable Club **Guides, Voltages, Temps & BIOS Templates** Inc SPREADSHEET - Page 357

post #3561 of 10701
Thread Starter 
eosgreen do this:

Clear cmos, set the vccio to 1.125v and dram voltage to 1.65v and run prime blend custom blend with 1792 & 1344 and 90% of your available RAM. That should show signs of instability on the RAM. Run it for 15 mins each and screenshot it and post back here. Make sure the clock speed and everything eles is on stock. If it runs fine then we won't need to mess around with the DRAM voltage or the VCCIO.

EDIT:

Also make sure to set the stock timings.

I'll be back in an hour. hopefully you should be done by then.
Edited by munaim1 - 9/6/11 at 3:19pm
it looks alive
(17 items)
 
Sandy Transformed
(69 photos)
 
CPUMotherboardGraphicsRAM
i5 2500K [5ghz 1.44v 24/7] Asus Maximus IV Extreme SLI GTX 460 @ 920/1840/4100 [1.11v] 4GB Dominator GT @ 2133mhz CL8 [1.65v] 
Hard DriveHard DriveCoolingOS
Intel X25-M G2 80GB 3x Samsung F3 500GB RAID 0 EK Supreme HF Full Copper Windows 7 Ultimate 64bit 
MonitorPowerCaseAudio
LG42SL9500 42" 1080p [Surround Soon] XFX XXX Edition 650w Xigmatec Elysium JVC HA-RX700 [foam mod] 
  hide details  
Reply
it looks alive
(17 items)
 
Sandy Transformed
(69 photos)
 
CPUMotherboardGraphicsRAM
i5 2500K [5ghz 1.44v 24/7] Asus Maximus IV Extreme SLI GTX 460 @ 920/1840/4100 [1.11v] 4GB Dominator GT @ 2133mhz CL8 [1.65v] 
Hard DriveHard DriveCoolingOS
Intel X25-M G2 80GB 3x Samsung F3 500GB RAID 0 EK Supreme HF Full Copper Windows 7 Ultimate 64bit 
MonitorPowerCaseAudio
LG42SL9500 42" 1080p [Surround Soon] XFX XXX Edition 650w Xigmatec Elysium JVC HA-RX700 [foam mod] 
  hide details  
Reply
post #3562 of 10701
Quote:
Originally Posted by munaim1 View Post
eosgreen do this:

Clear cmos, set the vccio to 1.125v and dram voltage to 1.65v and run prime blend custom blend with 1792 & 1344 and 90% of your available RAM. That should show signs of instability on the RAM. Run it for 15 mins each and screenshot it and post back here. Make sure the clock speed and everything eles is on stock. If it runs fine then we won't need to mess around with the DRAM voltage or the VCCIO.

EDIT:

Also make sure to set the stock timings.
i have been stable on many OC's they just need lots of voltage

also if vccio is not 1.15 wont that be bad for the chip since i want to be with .5v?
Almost done...
(13 items)
 
  
CPUMotherboardGraphicsRAM
i5 2500K 4.6ghz P67 Sabertooth Asus 560 ti 4g Dominator Ram w/EKBlock 
Hard DriveOptical DriveOSMonitor
Corsair 120g force 3 ssd - Caviar Black WD 500g Asus Windows 7 21.5 Inch 1920/1080 
PowerCaseMouseMouse Pad
Corsair AX850w M8 Spawn Qck 
  hide details  
Reply
Almost done...
(13 items)
 
  
CPUMotherboardGraphicsRAM
i5 2500K 4.6ghz P67 Sabertooth Asus 560 ti 4g Dominator Ram w/EKBlock 
Hard DriveOptical DriveOSMonitor
Corsair 120g force 3 ssd - Caviar Black WD 500g Asus Windows 7 21.5 Inch 1920/1080 
PowerCaseMouseMouse Pad
Corsair AX850w M8 Spawn Qck 
  hide details  
Reply
post #3563 of 10701
Thread Starter 
Quote:
Originally Posted by eosgreen View Post
i have been stable on many OC's they just need lots of voltage

also if vccio is not 1.15 wont that be bad for the chip since i want to be with .5v?
not to worry, just do the above first then we can determine if that's the case and not something else. It's upto you if you still want to though.
it looks alive
(17 items)
 
Sandy Transformed
(69 photos)
 
CPUMotherboardGraphicsRAM
i5 2500K [5ghz 1.44v 24/7] Asus Maximus IV Extreme SLI GTX 460 @ 920/1840/4100 [1.11v] 4GB Dominator GT @ 2133mhz CL8 [1.65v] 
Hard DriveHard DriveCoolingOS
Intel X25-M G2 80GB 3x Samsung F3 500GB RAID 0 EK Supreme HF Full Copper Windows 7 Ultimate 64bit 
MonitorPowerCaseAudio
LG42SL9500 42" 1080p [Surround Soon] XFX XXX Edition 650w Xigmatec Elysium JVC HA-RX700 [foam mod] 
  hide details  
Reply
it looks alive
(17 items)
 
Sandy Transformed
(69 photos)
 
CPUMotherboardGraphicsRAM
i5 2500K [5ghz 1.44v 24/7] Asus Maximus IV Extreme SLI GTX 460 @ 920/1840/4100 [1.11v] 4GB Dominator GT @ 2133mhz CL8 [1.65v] 
Hard DriveHard DriveCoolingOS
Intel X25-M G2 80GB 3x Samsung F3 500GB RAID 0 EK Supreme HF Full Copper Windows 7 Ultimate 64bit 
MonitorPowerCaseAudio
LG42SL9500 42" 1080p [Surround Soon] XFX XXX Edition 650w Xigmatec Elysium JVC HA-RX700 [foam mod] 
  hide details  
Reply
post #3564 of 10701
Quote:
Originally Posted by munaim1 View Post
not to worry, just do the above first then we can determine if that's the case and not something else. It's upto you if you still want to though.
gonna do it now i was just told never to break the .5v so i get worried easily over that stuff
Almost done...
(13 items)
 
  
CPUMotherboardGraphicsRAM
i5 2500K 4.6ghz P67 Sabertooth Asus 560 ti 4g Dominator Ram w/EKBlock 
Hard DriveOptical DriveOSMonitor
Corsair 120g force 3 ssd - Caviar Black WD 500g Asus Windows 7 21.5 Inch 1920/1080 
PowerCaseMouseMouse Pad
Corsair AX850w M8 Spawn Qck 
  hide details  
Reply
Almost done...
(13 items)
 
  
CPUMotherboardGraphicsRAM
i5 2500K 4.6ghz P67 Sabertooth Asus 560 ti 4g Dominator Ram w/EKBlock 
Hard DriveOptical DriveOSMonitor
Corsair 120g force 3 ssd - Caviar Black WD 500g Asus Windows 7 21.5 Inch 1920/1080 
PowerCaseMouseMouse Pad
Corsair AX850w M8 Spawn Qck 
  hide details  
Reply
post #3565 of 10701
Thread Starter 
Quote:
Originally Posted by eosgreen View Post
gonna do it now i was just told never to break the .5v so i get worried easily over that stuff
The reason why I am telling you to do this is so that you won't have to touch the VCCIO later on and also because you set it 1.15v but it's actually receiving 1.81v which is way too high.

So please set the VCCIO to 1.125v, set the dram votlage to 1.65v and set the timings to it's stock and set the multi to 45 and the vcore to Manual and 1.3v and change all this:

PLL voltage to 1.45v
PLL overvoltage - disable (enable for higher multi's if you cannot boot)

and leave everything the way it is as you have shown in the screenshots.

Run prime blend 1344 for 15mins with 90% of your available RAM and report back with a screenshot showing cpu-z and prime blend and realtemp. If you get a bsod let me know what the error code is.
it looks alive
(17 items)
 
Sandy Transformed
(69 photos)
 
CPUMotherboardGraphicsRAM
i5 2500K [5ghz 1.44v 24/7] Asus Maximus IV Extreme SLI GTX 460 @ 920/1840/4100 [1.11v] 4GB Dominator GT @ 2133mhz CL8 [1.65v] 
Hard DriveHard DriveCoolingOS
Intel X25-M G2 80GB 3x Samsung F3 500GB RAID 0 EK Supreme HF Full Copper Windows 7 Ultimate 64bit 
MonitorPowerCaseAudio
LG42SL9500 42" 1080p [Surround Soon] XFX XXX Edition 650w Xigmatec Elysium JVC HA-RX700 [foam mod] 
  hide details  
Reply
it looks alive
(17 items)
 
Sandy Transformed
(69 photos)
 
CPUMotherboardGraphicsRAM
i5 2500K [5ghz 1.44v 24/7] Asus Maximus IV Extreme SLI GTX 460 @ 920/1840/4100 [1.11v] 4GB Dominator GT @ 2133mhz CL8 [1.65v] 
Hard DriveHard DriveCoolingOS
Intel X25-M G2 80GB 3x Samsung F3 500GB RAID 0 EK Supreme HF Full Copper Windows 7 Ultimate 64bit 
MonitorPowerCaseAudio
LG42SL9500 42" 1080p [Surround Soon] XFX XXX Edition 650w Xigmatec Elysium JVC HA-RX700 [foam mod] 
  hide details  
Reply
post #3566 of 10701
does anyone know if i should leave

cpu over current protection set to auto
x99 build
(9 items)
 
htpc
(15 items)
 
 
CPUMotherboardGraphicsRAM
5820k asrock xfatailty evga 980ti sli 16 gb ddr4 
Hard DriveCoolingOSMonitor
samsung evo850 noutla nh-15 win 10 acer XB271HU 
Power
evga 1300 
CPUMotherboardGraphicsRAM
2500k @ 4.8 1.416v stable gigabyte z68 950ti kingston 8GB ddr3 
Hard DriveCoolingOSPower
60g ssd + 96g ssd + 2tb hdd dark knight with 2 fans push pull win 10 corsair 1000 watt 
CaseAudio
custom xfi music 
  hide details  
Reply
x99 build
(9 items)
 
htpc
(15 items)
 
 
CPUMotherboardGraphicsRAM
5820k asrock xfatailty evga 980ti sli 16 gb ddr4 
Hard DriveCoolingOSMonitor
samsung evo850 noutla nh-15 win 10 acer XB271HU 
Power
evga 1300 
CPUMotherboardGraphicsRAM
2500k @ 4.8 1.416v stable gigabyte z68 950ti kingston 8GB ddr3 
Hard DriveCoolingOSPower
60g ssd + 96g ssd + 2tb hdd dark knight with 2 fans push pull win 10 corsair 1000 watt 
CaseAudio
custom xfi music 
  hide details  
Reply
post #3567 of 10701
Thread Starter 
Quote:
Originally Posted by brian19876 View Post
does anyone know if i should leave

cpu over current protection set to auto
I believe so, however best place to ask is here: http://www.overclock.net/intel-mothe...-club-111.html

I'm not so familiar with giga mobo's.
it looks alive
(17 items)
 
Sandy Transformed
(69 photos)
 
CPUMotherboardGraphicsRAM
i5 2500K [5ghz 1.44v 24/7] Asus Maximus IV Extreme SLI GTX 460 @ 920/1840/4100 [1.11v] 4GB Dominator GT @ 2133mhz CL8 [1.65v] 
Hard DriveHard DriveCoolingOS
Intel X25-M G2 80GB 3x Samsung F3 500GB RAID 0 EK Supreme HF Full Copper Windows 7 Ultimate 64bit 
MonitorPowerCaseAudio
LG42SL9500 42" 1080p [Surround Soon] XFX XXX Edition 650w Xigmatec Elysium JVC HA-RX700 [foam mod] 
  hide details  
Reply
it looks alive
(17 items)
 
Sandy Transformed
(69 photos)
 
CPUMotherboardGraphicsRAM
i5 2500K [5ghz 1.44v 24/7] Asus Maximus IV Extreme SLI GTX 460 @ 920/1840/4100 [1.11v] 4GB Dominator GT @ 2133mhz CL8 [1.65v] 
Hard DriveHard DriveCoolingOS
Intel X25-M G2 80GB 3x Samsung F3 500GB RAID 0 EK Supreme HF Full Copper Windows 7 Ultimate 64bit 
MonitorPowerCaseAudio
LG42SL9500 42" 1080p [Surround Soon] XFX XXX Edition 650w Xigmatec Elysium JVC HA-RX700 [foam mod] 
  hide details  
Reply
post #3568 of 10701
thanks for all you help i have one more question about prime if i get a rounding error on a worker during prime with 1344 fft is that vcore
x99 build
(9 items)
 
htpc
(15 items)
 
 
CPUMotherboardGraphicsRAM
5820k asrock xfatailty evga 980ti sli 16 gb ddr4 
Hard DriveCoolingOSMonitor
samsung evo850 noutla nh-15 win 10 acer XB271HU 
Power
evga 1300 
CPUMotherboardGraphicsRAM
2500k @ 4.8 1.416v stable gigabyte z68 950ti kingston 8GB ddr3 
Hard DriveCoolingOSPower
60g ssd + 96g ssd + 2tb hdd dark knight with 2 fans push pull win 10 corsair 1000 watt 
CaseAudio
custom xfi music 
  hide details  
Reply
x99 build
(9 items)
 
htpc
(15 items)
 
 
CPUMotherboardGraphicsRAM
5820k asrock xfatailty evga 980ti sli 16 gb ddr4 
Hard DriveCoolingOSMonitor
samsung evo850 noutla nh-15 win 10 acer XB271HU 
Power
evga 1300 
CPUMotherboardGraphicsRAM
2500k @ 4.8 1.416v stable gigabyte z68 950ti kingston 8GB ddr3 
Hard DriveCoolingOSPower
60g ssd + 96g ssd + 2tb hdd dark knight with 2 fans push pull win 10 corsair 1000 watt 
CaseAudio
custom xfi music 
  hide details  
Reply
post #3569 of 10701
Thread Starter 
Quote:
Originally Posted by brian19876 View Post
thanks for all you help i have one more question about prime if i get a rounding error on a worker during prime with 1344 fft is that vcore
IIRC that's the RAM. whats your RAM settings? and are you running prime with 90% of your RAM?

EDIT:

Could also be vcore, no way of knowing, unlesss you're tweaking the RAM.
Edited by munaim1 - 9/6/11 at 8:49pm
it looks alive
(17 items)
 
Sandy Transformed
(69 photos)
 
CPUMotherboardGraphicsRAM
i5 2500K [5ghz 1.44v 24/7] Asus Maximus IV Extreme SLI GTX 460 @ 920/1840/4100 [1.11v] 4GB Dominator GT @ 2133mhz CL8 [1.65v] 
Hard DriveHard DriveCoolingOS
Intel X25-M G2 80GB 3x Samsung F3 500GB RAID 0 EK Supreme HF Full Copper Windows 7 Ultimate 64bit 
MonitorPowerCaseAudio
LG42SL9500 42" 1080p [Surround Soon] XFX XXX Edition 650w Xigmatec Elysium JVC HA-RX700 [foam mod] 
  hide details  
Reply
it looks alive
(17 items)
 
Sandy Transformed
(69 photos)
 
CPUMotherboardGraphicsRAM
i5 2500K [5ghz 1.44v 24/7] Asus Maximus IV Extreme SLI GTX 460 @ 920/1840/4100 [1.11v] 4GB Dominator GT @ 2133mhz CL8 [1.65v] 
Hard DriveHard DriveCoolingOS
Intel X25-M G2 80GB 3x Samsung F3 500GB RAID 0 EK Supreme HF Full Copper Windows 7 Ultimate 64bit 
MonitorPowerCaseAudio
LG42SL9500 42" 1080p [Surround Soon] XFX XXX Edition 650w Xigmatec Elysium JVC HA-RX700 [foam mod] 
  hide details  
Reply
post #3570 of 10701
was stable at 4.7 was trying for 4.8 my ram is set to 1600 at 1.6v did not change ram setting going to 4.8 same as 4.7
x99 build
(9 items)
 
htpc
(15 items)
 
 
CPUMotherboardGraphicsRAM
5820k asrock xfatailty evga 980ti sli 16 gb ddr4 
Hard DriveCoolingOSMonitor
samsung evo850 noutla nh-15 win 10 acer XB271HU 
Power
evga 1300 
CPUMotherboardGraphicsRAM
2500k @ 4.8 1.416v stable gigabyte z68 950ti kingston 8GB ddr3 
Hard DriveCoolingOSPower
60g ssd + 96g ssd + 2tb hdd dark knight with 2 fans push pull win 10 corsair 1000 watt 
CaseAudio
custom xfi music 
  hide details  
Reply
x99 build
(9 items)
 
htpc
(15 items)
 
 
CPUMotherboardGraphicsRAM
5820k asrock xfatailty evga 980ti sli 16 gb ddr4 
Hard DriveCoolingOSMonitor
samsung evo850 noutla nh-15 win 10 acer XB271HU 
Power
evga 1300 
CPUMotherboardGraphicsRAM
2500k @ 4.8 1.416v stable gigabyte z68 950ti kingston 8GB ddr3 
Hard DriveCoolingOSPower
60g ssd + 96g ssd + 2tb hdd dark knight with 2 fans push pull win 10 corsair 1000 watt 
CaseAudio
custom xfi music 
  hide details  
Reply
New Posts  All Forums:Forum Nav:
  Return Home
  Back to Forum: Intel CPUs
  • [Official] The Sandy Stable Club **Guides, Voltages, Temps & BIOS Templates** Inc SPREADSHEET
Overclock.net › Forums › Intel › Intel CPUs › [Official] The Sandy Stable Club **Guides, Voltages, Temps & BIOS Templates** Inc SPREADSHEET