Overclock.net › Forums › Intel › Intel CPUs › [Official] The Sandy Stable Club **Guides, Voltages, Temps & BIOS Templates** Inc SPREADSHEET
New Posts  All Forums:Forum Nav:

[Official] The Sandy Stable Club **Guides, Voltages, Temps & BIOS Templates** Inc SPREADSHEET - Page 358

post #3571 of 10702
Thread Starter 
Quote:
Originally Posted by brian19876 View Post
was stable at 4.7 was trying for 4.8 my ram is set to 1600 at 1.6v did not change ram setting going to 4.8 same as 4.7
in that case it's the vcore, continue upping it until you are satisfied with the temps and it's stable.


EDIT:

Wow just realised this thread has gone just over 350 pages lol.... No worries all bit's of important info and findings are linked in the OP so should be eaier to find

May impement my little SB guide in the OP somewhere aswell.
Edited by munaim1 - 9/6/11 at 8:59pm
it looks alive
(17 items)
 
Sandy Transformed
(69 photos)
 
CPUMotherboardGraphicsRAM
i5 2500K [5ghz 1.44v 24/7] Asus Maximus IV Extreme SLI GTX 460 @ 920/1840/4100 [1.11v] 4GB Dominator GT @ 2133mhz CL8 [1.65v] 
Hard DriveHard DriveCoolingOS
Intel X25-M G2 80GB 3x Samsung F3 500GB RAID 0 EK Supreme HF Full Copper Windows 7 Ultimate 64bit 
MonitorPowerCaseAudio
LG42SL9500 42" 1080p [Surround Soon] XFX XXX Edition 650w Xigmatec Elysium JVC HA-RX700 [foam mod] 
  hide details  
Reply
it looks alive
(17 items)
 
Sandy Transformed
(69 photos)
 
CPUMotherboardGraphicsRAM
i5 2500K [5ghz 1.44v 24/7] Asus Maximus IV Extreme SLI GTX 460 @ 920/1840/4100 [1.11v] 4GB Dominator GT @ 2133mhz CL8 [1.65v] 
Hard DriveHard DriveCoolingOS
Intel X25-M G2 80GB 3x Samsung F3 500GB RAID 0 EK Supreme HF Full Copper Windows 7 Ultimate 64bit 
MonitorPowerCaseAudio
LG42SL9500 42" 1080p [Surround Soon] XFX XXX Edition 650w Xigmatec Elysium JVC HA-RX700 [foam mod] 
  hide details  
Reply
post #3572 of 10702
Quote:
Originally Posted by munaim1 View Post
PLL overvoltage? what were your settings for 5.3+
PLL overvoltage was enabled in BIOS, PLL voltage was 1.7, anything more than this wont post, VCCio/VTT/QPI was 1.13v, CPU vcore was at 1.465v,1.472v, & 1.481v. I dint try higher voltages than these.
post #3573 of 10702
x99 build
(9 items)
 
htpc
(15 items)
 
 
CPUMotherboardGraphicsRAM
5820k asrock xfatailty evga 980ti sli 16 gb ddr4 
Hard DriveCoolingOSMonitor
samsung evo850 noutla nh-15 win 10 acer XB271HU 
Power
evga 1300 
CPUMotherboardGraphicsRAM
2500k @ 4.8 1.416v stable gigabyte z68 950ti kingston 8GB ddr3 
Hard DriveCoolingOSPower
60g ssd + 96g ssd + 2tb hdd dark knight with 2 fans push pull win 10 corsair 1000 watt 
CaseAudio
custom xfi music 
  hide details  
Reply
x99 build
(9 items)
 
htpc
(15 items)
 
 
CPUMotherboardGraphicsRAM
5820k asrock xfatailty evga 980ti sli 16 gb ddr4 
Hard DriveCoolingOSMonitor
samsung evo850 noutla nh-15 win 10 acer XB271HU 
Power
evga 1300 
CPUMotherboardGraphicsRAM
2500k @ 4.8 1.416v stable gigabyte z68 950ti kingston 8GB ddr3 
Hard DriveCoolingOSPower
60g ssd + 96g ssd + 2tb hdd dark knight with 2 fans push pull win 10 corsair 1000 watt 
CaseAudio
custom xfi music 
  hide details  
Reply
post #3574 of 10702
Hi everyone biggrin.gif. I have some problems loading into Windows where it just hangs at the Windows logo at even X46 multi. My only solution was to enable PLL over voltage. So reading some of the post regarding PLL over voltage, I understand if u enable PLL over voltage u lose the sleep functionality. Apart from that, any other negative impact from enabling it ?
yarrrrrr!
(13 items)
 
  
CPUMotherboardGraphicsRAM
i7 2600K Asus P8P67 Deluxe XFX HD 7970 Corsair Vengeance 8GB Cas 8 
Hard DriveOptical DriveOSMonitor
1x 120 GB Corsair Force GT SSD / WD green 1 TB Sony Win 7 home 64 U2311 
PowerCase
HX1000 Haf X 
  hide details  
Reply
yarrrrrr!
(13 items)
 
  
CPUMotherboardGraphicsRAM
i7 2600K Asus P8P67 Deluxe XFX HD 7970 Corsair Vengeance 8GB Cas 8 
Hard DriveOptical DriveOSMonitor
1x 120 GB Corsair Force GT SSD / WD green 1 TB Sony Win 7 home 64 U2311 
PowerCase
HX1000 Haf X 
  hide details  
Reply
post #3575 of 10702
Quote:
Originally Posted by brian19876 View Post
You have to add it together and show them to us so we can compare......
i5 2500K GTX570HD
(14 items)
 
  
CPUMotherboardGraphicsRAM
i5 2500K @ 4.8GHz 1.384V AsRock P67 Extreme4 (B3) UEFI3.19 EVGA GTX 570HD SC 930/1950 G.Skill RipjawsX DDR3 PC12800 2x4GB@1866 9-10-9-28 
Hard DriveOptical DriveCoolingOS
Crucial M4 SSD 128GB, 1x 500GB WD, 2x1TB WD Samsung DL DVD Writer Noctua NH-D14 Windows 7 Ultimate 64Bit SP1 
MonitorKeyboardPowerCase
Asus VG248QE Steelseries 6GV2 Rosewill Capstone 650W Corsair 600T White 
MouseMouse Pad
Steelseries Sensei Steelseries Qck Mini 
  hide details  
Reply
i5 2500K GTX570HD
(14 items)
 
  
CPUMotherboardGraphicsRAM
i5 2500K @ 4.8GHz 1.384V AsRock P67 Extreme4 (B3) UEFI3.19 EVGA GTX 570HD SC 930/1950 G.Skill RipjawsX DDR3 PC12800 2x4GB@1866 9-10-9-28 
Hard DriveOptical DriveCoolingOS
Crucial M4 SSD 128GB, 1x 500GB WD, 2x1TB WD Samsung DL DVD Writer Noctua NH-D14 Windows 7 Ultimate 64Bit SP1 
MonitorKeyboardPowerCase
Asus VG248QE Steelseries 6GV2 Rosewill Capstone 650W Corsair 600T White 
MouseMouse Pad
Steelseries Sensei Steelseries Qck Mini 
  hide details  
Reply
post #3576 of 10702
Thread Starter 
Quote:
Originally Posted by devvfata1ity View Post
PLL overvoltage was enabled in BIOS, PLL voltage was 1.7, anything more than this wont post, VCCio/VTT/QPI was 1.13v, CPU vcore was at 1.465v,1.472v, & 1.481v. I dint try higher voltages than these.
You need higher voltage than that.



Quote:
Originally Posted by brian19876 View Post
where is cpu-z and RAM info? please refer to everyone elses screenshot.

Thanks


Quote:
Originally Posted by Flyingtreks View Post
Hi everyone . I have some problems loading into Windows where it just hangs at the Windows logo at even X46 multi. My only solution was to enable PLL over voltage. So reading some of the post regarding PLL over voltage, I understand if u enable PLL over voltage u lose the sleep functionality. Apart from that, any other negative impact from enabling it ?

Nope, just the sleep function gets disrupted, not sure as to when/if a BIOS fix will come for that.
it looks alive
(17 items)
 
Sandy Transformed
(69 photos)
 
CPUMotherboardGraphicsRAM
i5 2500K [5ghz 1.44v 24/7] Asus Maximus IV Extreme SLI GTX 460 @ 920/1840/4100 [1.11v] 4GB Dominator GT @ 2133mhz CL8 [1.65v] 
Hard DriveHard DriveCoolingOS
Intel X25-M G2 80GB 3x Samsung F3 500GB RAID 0 EK Supreme HF Full Copper Windows 7 Ultimate 64bit 
MonitorPowerCaseAudio
LG42SL9500 42" 1080p [Surround Soon] XFX XXX Edition 650w Xigmatec Elysium JVC HA-RX700 [foam mod] 
  hide details  
Reply
it looks alive
(17 items)
 
Sandy Transformed
(69 photos)
 
CPUMotherboardGraphicsRAM
i5 2500K [5ghz 1.44v 24/7] Asus Maximus IV Extreme SLI GTX 460 @ 920/1840/4100 [1.11v] 4GB Dominator GT @ 2133mhz CL8 [1.65v] 
Hard DriveHard DriveCoolingOS
Intel X25-M G2 80GB 3x Samsung F3 500GB RAID 0 EK Supreme HF Full Copper Windows 7 Ultimate 64bit 
MonitorPowerCaseAudio
LG42SL9500 42" 1080p [Surround Soon] XFX XXX Edition 650w Xigmatec Elysium JVC HA-RX700 [foam mod] 
  hide details  
Reply
post #3577 of 10702
I would like to join the club!

This is actually my first Intel build since my Pentium 90 from way back when and I love Intel. This is also my first ever 12 hour P95 test with this overclock.

Basically its a 4.8Ghz OC @1.4v and I'm actually very surprised that I got it stable so quickly considering I didn't do a hell of a whole lot. Munaim1 has a little guide (WHICH HE HASN'T MADE A POST FOR YET!!!!) and I used his suggested settings for the Digi+VRM for my board and most of the other settings where on default already. Just set my multiplier to 48 and voltage to 1.400v (because a few months ago I couldn't get it stable for 10 mins in P95 with anything lower) and boom a 12 hour P95 custom blend of 7200 megs of ram

On the right hand side is my second monitor which is a 15inch which is why it looks smaller.


Ugh I didn't relize that the picture got fuzzy, but its an Asus P8P67 Pro mobo.

Edited by Crabby654 - 9/7/11 at 8:09am
post #3578 of 10702
Thread Starter 
Could you add the pic as an attachement
it looks alive
(17 items)
 
Sandy Transformed
(69 photos)
 
CPUMotherboardGraphicsRAM
i5 2500K [5ghz 1.44v 24/7] Asus Maximus IV Extreme SLI GTX 460 @ 920/1840/4100 [1.11v] 4GB Dominator GT @ 2133mhz CL8 [1.65v] 
Hard DriveHard DriveCoolingOS
Intel X25-M G2 80GB 3x Samsung F3 500GB RAID 0 EK Supreme HF Full Copper Windows 7 Ultimate 64bit 
MonitorPowerCaseAudio
LG42SL9500 42" 1080p [Surround Soon] XFX XXX Edition 650w Xigmatec Elysium JVC HA-RX700 [foam mod] 
  hide details  
Reply
it looks alive
(17 items)
 
Sandy Transformed
(69 photos)
 
CPUMotherboardGraphicsRAM
i5 2500K [5ghz 1.44v 24/7] Asus Maximus IV Extreme SLI GTX 460 @ 920/1840/4100 [1.11v] 4GB Dominator GT @ 2133mhz CL8 [1.65v] 
Hard DriveHard DriveCoolingOS
Intel X25-M G2 80GB 3x Samsung F3 500GB RAID 0 EK Supreme HF Full Copper Windows 7 Ultimate 64bit 
MonitorPowerCaseAudio
LG42SL9500 42" 1080p [Surround Soon] XFX XXX Edition 650w Xigmatec Elysium JVC HA-RX700 [foam mod] 
  hide details  
Reply
post #3579 of 10702
Done!
post #3580 of 10702
Thread Starter 
Quote:
Originally Posted by crabby654 View Post
Done!
thanks bud I'll add it right now, in the mean time:


Grab your sig and wear it proudly

Code:

[CENTER][SIZE="3"][B][THREAD=968053][FONT="Book Antiqua"][:clock:] The Sandy STABLE Club [:clock:][/FONT][/THREAD][/B][/SIZE][/CENTER] 



Quote:
BIOS TEMPLATES

I have created a sheet for BIOS templates, it could be a reference point to other's including oneself and a quick 'copy and paste' whenever required in other threads/posts etc.

Those that have posted their stable systems please spare a few minutes of your time to do this. One more thing, these are the ones im after:
  • Main BIOS page (The advanced settings main page)

  • Full AI tweaker Page including DRAM Timing control

  • CPU Configuration Page



Welcome to the club and also I'll add the guide in OP aswell.
Edited by munaim1 - 9/7/11 at 8:18am
it looks alive
(17 items)
 
Sandy Transformed
(69 photos)
 
CPUMotherboardGraphicsRAM
i5 2500K [5ghz 1.44v 24/7] Asus Maximus IV Extreme SLI GTX 460 @ 920/1840/4100 [1.11v] 4GB Dominator GT @ 2133mhz CL8 [1.65v] 
Hard DriveHard DriveCoolingOS
Intel X25-M G2 80GB 3x Samsung F3 500GB RAID 0 EK Supreme HF Full Copper Windows 7 Ultimate 64bit 
MonitorPowerCaseAudio
LG42SL9500 42" 1080p [Surround Soon] XFX XXX Edition 650w Xigmatec Elysium JVC HA-RX700 [foam mod] 
  hide details  
Reply
it looks alive
(17 items)
 
Sandy Transformed
(69 photos)
 
CPUMotherboardGraphicsRAM
i5 2500K [5ghz 1.44v 24/7] Asus Maximus IV Extreme SLI GTX 460 @ 920/1840/4100 [1.11v] 4GB Dominator GT @ 2133mhz CL8 [1.65v] 
Hard DriveHard DriveCoolingOS
Intel X25-M G2 80GB 3x Samsung F3 500GB RAID 0 EK Supreme HF Full Copper Windows 7 Ultimate 64bit 
MonitorPowerCaseAudio
LG42SL9500 42" 1080p [Surround Soon] XFX XXX Edition 650w Xigmatec Elysium JVC HA-RX700 [foam mod] 
  hide details  
Reply
New Posts  All Forums:Forum Nav:
  Return Home
  Back to Forum: Intel CPUs
  • [Official] The Sandy Stable Club **Guides, Voltages, Temps & BIOS Templates** Inc SPREADSHEET
Overclock.net › Forums › Intel › Intel CPUs › [Official] The Sandy Stable Club **Guides, Voltages, Temps & BIOS Templates** Inc SPREADSHEET