Originally Posted by Ellis
Struggling a bit with 4.7GHz - I figured this would be where things started to get tricky. Currently: LLC level 6 with voltage set to 1.32V in BIOS, goes up to about 1.36V under load but seems to hit around 1.38V idle (any way to stop this?)
But I keep getting 124 BSoDs when running Prime95. What would you recommend?
LLC 6?? looks like voltage spike to me. Like I explained before, LLC is there to reduce the vdroop and compensate the voltage under load, certain settings, usually the high ones, will spike the voltage above what is set in the BIOS which is NOT
a good idea. Lower the LLC and make sure the load voltage is as close to what you set in the bios as possible, use the llc settings to do that. If you have to increase the vcore rather than the LLC, that only if you require a certain amount of voltage for a specific overclock.
After you done the LLC bit, report back if you continue getting the 124 error we can look into it further.