Overclock.net › Forums › Intel › Intel CPUs › [Official] The Sandy Stable Club **Guides, Voltages, Temps & BIOS Templates** Inc SPREADSHEET
New Posts  All Forums:Forum Nav:

[Official] The Sandy Stable Club **Guides, Voltages, Temps & BIOS Templates** Inc SPREADSHEET - Page 388

post #3871 of 10702
Quote:
Originally Posted by munaim1 View Post
thanks for the confirmation.

Just wanted to ask, hows the GEN3 working for you??? I've worked with a couple and have had some pretty good overclocks and no problems what so ever.

Pretty silly asking you the question in the stable club lol, especially when I've seen how well you have you been doing with the mobo but would still like to know how your experience has been with it.

Thanks bud
You know, I like it, but there are some strange quirks with it. For example, when I reset my cmos, on the first boot I have the option to disable c3 and c6 states. If I reboot again though, the c6 option disappears.

Also, I updated my bios to version 1.1 yesterday, and on first boot it wouldnt post with my xbox 360 controller plugged in, and my mouse no longer works in the uefi.

Lastly, I had my oc stable at 4.8 with 1.395v, but then I reset my cmos, put all the same settings in, and couldn't get it stable on that voltage and even a bit higher. (I settled for 4.5 because. after all, it's all I really need and I love the temps)

How much of this is my fault, like forgetting a setting or something, and how much is the board I don't know. Just quirky issues. Other than that though it's been a solid overclocker.
Edited by fuloran1 - 9/15/11 at 10:30am
post #3872 of 10702
Looks like the high temps are anomalies during certain portions of the custom blend:



Uploaded with ImageShack.us


Here are the temps jacked-up:




Uploaded with ImageShack.us

Temps be damned...here is my submission:




Uploaded with ImageShack.us
Super-Storm Sandy
(15 items)
 
  
CPUMotherboardGraphicsRAM
i7 3820 @ 4.43 ghz ASUS Sabertooth X79 Sparkle Calibre GTX 670 SLI 16 GB Corsair Dominator CL9 2133 Mhz @ 2200 Mhz 
Hard DriveOptical DriveCoolingOS
Crucial M4 128 GB Lite-On LightScribe 24X SATA DVD+/-RW Dual Layer D Thermaltake Water Pro 2.0 Windows 8 Pro 
MonitorKeyboardPowerCase
3x Dell UltraSharp U2412M 5970 x 1200 Steelseries Thermaltake Toughpower XT TPX-775M 775W Corsair 600T 
MouseMouse PadAudio
Logitech G400 wired basic black onboard realtek 
  hide details  
Reply
Super-Storm Sandy
(15 items)
 
  
CPUMotherboardGraphicsRAM
i7 3820 @ 4.43 ghz ASUS Sabertooth X79 Sparkle Calibre GTX 670 SLI 16 GB Corsair Dominator CL9 2133 Mhz @ 2200 Mhz 
Hard DriveOptical DriveCoolingOS
Crucial M4 128 GB Lite-On LightScribe 24X SATA DVD+/-RW Dual Layer D Thermaltake Water Pro 2.0 Windows 8 Pro 
MonitorKeyboardPowerCase
3x Dell UltraSharp U2412M 5970 x 1200 Steelseries Thermaltake Toughpower XT TPX-775M 775W Corsair 600T 
MouseMouse PadAudio
Logitech G400 wired basic black onboard realtek 
  hide details  
Reply
post #3873 of 10702
Quote:
Originally Posted by spacin9guild View Post
Looks like the high temps are anomalies during certain portions of the custom blend:



Uploaded with ImageShack.us


Here are the temps jacked-up:



Uploaded with ImageShack.us

Temps be damned...here is my submission:
NOPE...
ur temps are a bit high...but its normal for shorter FTT length Prime95 tests to put out MORE heat ... and to ramp up Vcore a bit as i have noticed...

Am i ?
Zeus
(16 items)
 
  
CPUMotherboardGraphicsRAM
i5 2500k 5 Ghz @ 1.488 V 24/7 Asrock p67 extreme 4 B3 Gainward GTX 570 GS GLH @ 850/2100 @ 1.00V 2x4 Gb G:SKILL Sniper @ 1600 9-9-9-24 t1 @ 1.260 V 
Hard DriveOptical DriveCoolingCooling
RAID-2xWD Sata3 Blue 500 Gb + 1xWD Sata3 Green 2TB none RAD: EK XTC 420 CPU Block: EK-Supreme HF - Full Nickel-EN 
CoolingOSMonitorKeyboard
GPU Block: EK Universal EN Win7 Professional 64Bit LG Flatron M2362D 23"[1920x1080] Steelseries 6GV2 
PowerCaseMouseMouse Pad
XFX PRO 550W CoolerMaster CM690 II Nvidia Edition Razer DeathAdder 3500Dpi Left hand edition Razer Goliathus Speed 
  hide details  
Reply
Zeus
(16 items)
 
  
CPUMotherboardGraphicsRAM
i5 2500k 5 Ghz @ 1.488 V 24/7 Asrock p67 extreme 4 B3 Gainward GTX 570 GS GLH @ 850/2100 @ 1.00V 2x4 Gb G:SKILL Sniper @ 1600 9-9-9-24 t1 @ 1.260 V 
Hard DriveOptical DriveCoolingCooling
RAID-2xWD Sata3 Blue 500 Gb + 1xWD Sata3 Green 2TB none RAD: EK XTC 420 CPU Block: EK-Supreme HF - Full Nickel-EN 
CoolingOSMonitorKeyboard
GPU Block: EK Universal EN Win7 Professional 64Bit LG Flatron M2362D 23"[1920x1080] Steelseries 6GV2 
PowerCaseMouseMouse Pad
XFX PRO 550W CoolerMaster CM690 II Nvidia Edition Razer DeathAdder 3500Dpi Left hand edition Razer Goliathus Speed 
  hide details  
Reply
post #3874 of 10702
Here is my submission for the Sandy Stable Club.



How well does this stack up?

Regards,
KK
Edited by Krazy_Karl - 9/15/11 at 2:15pm
i7-Rig
(13 items)
 
  
CPUMotherboardGraphicsRAM
i7-2600K @ 4.7 Ghz Asus P8Z68-V Pro B3 EVGA GTX 570 @ 798/1960 GSkill RipjawX 16GB @ 1600 Mhz 
Hard DriveOSPowerCase
OCZ 120GB Vertex 3 IOPS Windows 7 Ultimate 64 Bit Seasonic X-Series 850W Silverstone FT-01-BW 
  hide details  
Reply
i7-Rig
(13 items)
 
  
CPUMotherboardGraphicsRAM
i7-2600K @ 4.7 Ghz Asus P8Z68-V Pro B3 EVGA GTX 570 @ 798/1960 GSkill RipjawX 16GB @ 1600 Mhz 
Hard DriveOSPowerCase
OCZ 120GB Vertex 3 IOPS Windows 7 Ultimate 64 Bit Seasonic X-Series 850W Silverstone FT-01-BW 
  hide details  
Reply
post #3875 of 10702
Quote:
Originally Posted by Krazy_Karl View Post
Here is my submission for the Sandy Stable Club.



How well does this stack up?

Regards,
KK

look pretty good next time you run it you should setup prime to use more ram around 90%
x99 build
(9 items)
 
htpc
(15 items)
 
 
CPUMotherboardGraphicsRAM
5820k asrock xfatailty evga 980ti sli 16 gb ddr4 
Hard DriveCoolingOSMonitor
samsung evo850 noutla nh-15 win 10 acer XB271HU 
Power
evga 1300 
CPUMotherboardGraphicsRAM
2500k @ 4.8 1.416v stable gigabyte z68 950ti kingston 8GB ddr3 
Hard DriveCoolingOSPower
60g ssd + 96g ssd + 2tb hdd dark knight with 2 fans push pull win 10 corsair 1000 watt 
CaseAudio
custom xfi music 
  hide details  
Reply
x99 build
(9 items)
 
htpc
(15 items)
 
 
CPUMotherboardGraphicsRAM
5820k asrock xfatailty evga 980ti sli 16 gb ddr4 
Hard DriveCoolingOSMonitor
samsung evo850 noutla nh-15 win 10 acer XB271HU 
Power
evga 1300 
CPUMotherboardGraphicsRAM
2500k @ 4.8 1.416v stable gigabyte z68 950ti kingston 8GB ddr3 
Hard DriveCoolingOSPower
60g ssd + 96g ssd + 2tb hdd dark knight with 2 fans push pull win 10 corsair 1000 watt 
CaseAudio
custom xfi music 
  hide details  
Reply
post #3876 of 10702
Quote:
Originally Posted by Rops84 View Post
NOPE...
ur temps are a bit high...but its normal for shorter FTT length Prime95 tests to put out MORE heat ... and to ramp up Vcore a bit as i have noticed...

Am i ?

Well, I guess I wanted it to be known that my temps weren't rocking 88c the whole test.
Super-Storm Sandy
(15 items)
 
  
CPUMotherboardGraphicsRAM
i7 3820 @ 4.43 ghz ASUS Sabertooth X79 Sparkle Calibre GTX 670 SLI 16 GB Corsair Dominator CL9 2133 Mhz @ 2200 Mhz 
Hard DriveOptical DriveCoolingOS
Crucial M4 128 GB Lite-On LightScribe 24X SATA DVD+/-RW Dual Layer D Thermaltake Water Pro 2.0 Windows 8 Pro 
MonitorKeyboardPowerCase
3x Dell UltraSharp U2412M 5970 x 1200 Steelseries Thermaltake Toughpower XT TPX-775M 775W Corsair 600T 
MouseMouse PadAudio
Logitech G400 wired basic black onboard realtek 
  hide details  
Reply
Super-Storm Sandy
(15 items)
 
  
CPUMotherboardGraphicsRAM
i7 3820 @ 4.43 ghz ASUS Sabertooth X79 Sparkle Calibre GTX 670 SLI 16 GB Corsair Dominator CL9 2133 Mhz @ 2200 Mhz 
Hard DriveOptical DriveCoolingOS
Crucial M4 128 GB Lite-On LightScribe 24X SATA DVD+/-RW Dual Layer D Thermaltake Water Pro 2.0 Windows 8 Pro 
MonitorKeyboardPowerCase
3x Dell UltraSharp U2412M 5970 x 1200 Steelseries Thermaltake Toughpower XT TPX-775M 775W Corsair 600T 
MouseMouse PadAudio
Logitech G400 wired basic black onboard realtek 
  hide details  
Reply
post #3877 of 10702
Thread Starter 
spacin9guild

Submission updated, your old screenie will still be avialbe in the old section for your own comparison, nice job bud



Krazy_Karl

Welcome to OCN and the stable club, thank you for contributing. Pretty good overclock, 4.7 with less than 1.4v and HT enabled and the temps below 80c is damn good. well done.

Both submissions have been added, please take the time to add the sig and share your BIOS settings for your stable run.


Grab your sig and wear it proudly

Code:

[CENTER][SIZE="3"][B][THREAD=968053][FONT="Book Antiqua"][:clock:] The Sandy STABLE Club [:clock:][/FONT][/THREAD][/B][/SIZE][/CENTER] 

Quote:
BIOS TEMPLATES

I have created a sheet for BIOS templates, it could be a reference point to other's including oneself and a quick 'copy and paste' whenever required in other threads/posts etc.

Those that have posted their stable systems please spare a few minutes of your time to do this. One more thing, these are the ones im after:
  • Main BIOS page (The advanced settings main page)

  • Full AI tweaker Page including DRAM Timing control

  • CPU Configuration Page


Spreadsheet contains voltage info, temperature info, cooling info, BIOS templates and seperate sheets hava been created for all of those, including one which filters the i5 and i7. This should be helpful to SB users and those looking to get SB, it also helps provide real world data regarding how the coolers are performing, what temps people are getting with the overclocks and at what kind of votlages, I think that it s a great addition to OCN and one that SB and non SB users can benefit from.


Thanks to all that contributed to this thread and spreadsheet, would not have been possible without you guys


We currently have just over 120 members and we are looking for MORE


SO GET POSTING GUYS BUT REMEMBER TO FOLLOW THE RULES!!!!


And again thanks to all those participated, we have some excellent club members here!!!!


Quote:
Need help getting your rig stable??? All you have to do is ask or post your problem here
it looks alive
(17 items)
 
Sandy Transformed
(69 photos)
 
CPUMotherboardGraphicsRAM
i5 2500K [5ghz 1.44v 24/7] Asus Maximus IV Extreme SLI GTX 460 @ 920/1840/4100 [1.11v] 4GB Dominator GT @ 2133mhz CL8 [1.65v] 
Hard DriveHard DriveCoolingOS
Intel X25-M G2 80GB 3x Samsung F3 500GB RAID 0 EK Supreme HF Full Copper Windows 7 Ultimate 64bit 
MonitorPowerCaseAudio
LG42SL9500 42" 1080p [Surround Soon] XFX XXX Edition 650w Xigmatec Elysium JVC HA-RX700 [foam mod] 
  hide details  
Reply
it looks alive
(17 items)
 
Sandy Transformed
(69 photos)
 
CPUMotherboardGraphicsRAM
i5 2500K [5ghz 1.44v 24/7] Asus Maximus IV Extreme SLI GTX 460 @ 920/1840/4100 [1.11v] 4GB Dominator GT @ 2133mhz CL8 [1.65v] 
Hard DriveHard DriveCoolingOS
Intel X25-M G2 80GB 3x Samsung F3 500GB RAID 0 EK Supreme HF Full Copper Windows 7 Ultimate 64bit 
MonitorPowerCaseAudio
LG42SL9500 42" 1080p [Surround Soon] XFX XXX Edition 650w Xigmatec Elysium JVC HA-RX700 [foam mod] 
  hide details  
Reply
post #3878 of 10702
Might have time to increase/stabilise this over the weekend, depends how much work I need to do for college.

Still running at around 1.38-1.39V at idle I think, which needs to be sorted out. Is offset voltage fairly simple to set up? If so, could someone explain to me quickly how to do it? Don't want to spend hours on it as I've got things I should probably be doing first (work ) but if it's not going to take too long to set up I'd happily do it.
Edited by Ellis - 9/15/11 at 3:09pm
post #3879 of 10702
Thread Starter 
Quote:
Originally Posted by Ellis View Post
Might have time to increase/stabilise this over the weekend, depends how much work I need to do for college.

Still running at around 1.38-1.39V at idle I think, which needs to be sorted out. Is offset voltage fairly simple to set up? If so, could someone explain to me quickly how to do it? Don't want to spend hours on it as I've got things I should probably be doing first (work ) but if it's not going to take too long to set up I'd happily do it.
it's pretty simple, I only switched to offset some time last week for the first time and it's amazing.

set the multi to 40 and the offset to +0.05 then load prime and read the voltage via cpu-z whilst under load, then you have a basic idea of how much you will need. continue increasing the OFFSET value to your desired voltage under load and then set the multi back to what you previously had it. you may have to tweak it a little after that.
it looks alive
(17 items)
 
Sandy Transformed
(69 photos)
 
CPUMotherboardGraphicsRAM
i5 2500K [5ghz 1.44v 24/7] Asus Maximus IV Extreme SLI GTX 460 @ 920/1840/4100 [1.11v] 4GB Dominator GT @ 2133mhz CL8 [1.65v] 
Hard DriveHard DriveCoolingOS
Intel X25-M G2 80GB 3x Samsung F3 500GB RAID 0 EK Supreme HF Full Copper Windows 7 Ultimate 64bit 
MonitorPowerCaseAudio
LG42SL9500 42" 1080p [Surround Soon] XFX XXX Edition 650w Xigmatec Elysium JVC HA-RX700 [foam mod] 
  hide details  
Reply
it looks alive
(17 items)
 
Sandy Transformed
(69 photos)
 
CPUMotherboardGraphicsRAM
i5 2500K [5ghz 1.44v 24/7] Asus Maximus IV Extreme SLI GTX 460 @ 920/1840/4100 [1.11v] 4GB Dominator GT @ 2133mhz CL8 [1.65v] 
Hard DriveHard DriveCoolingOS
Intel X25-M G2 80GB 3x Samsung F3 500GB RAID 0 EK Supreme HF Full Copper Windows 7 Ultimate 64bit 
MonitorPowerCaseAudio
LG42SL9500 42" 1080p [Surround Soon] XFX XXX Edition 650w Xigmatec Elysium JVC HA-RX700 [foam mod] 
  hide details  
Reply
post #3880 of 10702
Quote:
Originally Posted by munaim1 View Post
it's pretty simple, I only switched to offset some time last week for the first time and it's amazing.

set the multi to 40 and the offset to +0.05 then load prime and read the voltage via cpu-z whilst under load, then you have a basic idea of how much you will need. continue increasing the OFFSET value to your desired voltage under load and then set the multi back to what you previously had it. you may have to tweak it a little after that.
Will that give him really high Vcore once he sets his MULTI to say 47 and his VID gets higher?... offset works around VID voltage...

I think u where saying to stabilize at 4.0 ghz and than just ramp up MULTI and let the voltage scale up with VID?
Right?

And 2 more qestions...
Has any of U guys played with the Additional Turbo Voltage before?
Does it have any effect while OC-ing these chips?
I keep it on Auto for now...
maybe there is a way to use that setting for something...
Zeus
(16 items)
 
  
CPUMotherboardGraphicsRAM
i5 2500k 5 Ghz @ 1.488 V 24/7 Asrock p67 extreme 4 B3 Gainward GTX 570 GS GLH @ 850/2100 @ 1.00V 2x4 Gb G:SKILL Sniper @ 1600 9-9-9-24 t1 @ 1.260 V 
Hard DriveOptical DriveCoolingCooling
RAID-2xWD Sata3 Blue 500 Gb + 1xWD Sata3 Green 2TB none RAD: EK XTC 420 CPU Block: EK-Supreme HF - Full Nickel-EN 
CoolingOSMonitorKeyboard
GPU Block: EK Universal EN Win7 Professional 64Bit LG Flatron M2362D 23"[1920x1080] Steelseries 6GV2 
PowerCaseMouseMouse Pad
XFX PRO 550W CoolerMaster CM690 II Nvidia Edition Razer DeathAdder 3500Dpi Left hand edition Razer Goliathus Speed 
  hide details  
Reply
Zeus
(16 items)
 
  
CPUMotherboardGraphicsRAM
i5 2500k 5 Ghz @ 1.488 V 24/7 Asrock p67 extreme 4 B3 Gainward GTX 570 GS GLH @ 850/2100 @ 1.00V 2x4 Gb G:SKILL Sniper @ 1600 9-9-9-24 t1 @ 1.260 V 
Hard DriveOptical DriveCoolingCooling
RAID-2xWD Sata3 Blue 500 Gb + 1xWD Sata3 Green 2TB none RAD: EK XTC 420 CPU Block: EK-Supreme HF - Full Nickel-EN 
CoolingOSMonitorKeyboard
GPU Block: EK Universal EN Win7 Professional 64Bit LG Flatron M2362D 23"[1920x1080] Steelseries 6GV2 
PowerCaseMouseMouse Pad
XFX PRO 550W CoolerMaster CM690 II Nvidia Edition Razer DeathAdder 3500Dpi Left hand edition Razer Goliathus Speed 
  hide details  
Reply
New Posts  All Forums:Forum Nav:
  Return Home
  Back to Forum: Intel CPUs
  • [Official] The Sandy Stable Club **Guides, Voltages, Temps & BIOS Templates** Inc SPREADSHEET
Overclock.net › Forums › Intel › Intel CPUs › [Official] The Sandy Stable Club **Guides, Voltages, Temps & BIOS Templates** Inc SPREADSHEET