Overclock.net › Forums › Intel › Intel CPUs › [Official] The Sandy Stable Club **Guides, Voltages, Temps & BIOS Templates** Inc SPREADSHEET
New Posts  All Forums:Forum Nav:

[Official] The Sandy Stable Club **Guides, Voltages, Temps & BIOS Templates** Inc SPREADSHEET - Page 410

post #4091 of 10702
Thread Starter 
Quote:
Originally Posted by Ellis;15026776 
I haven't changed the PLL voltage at all since I set it to 1.7V at some point.

Also, something I remembered quite recently was that when I tested with 1.1V VTT I used 1792 FFTs (which is when it lasted 1 hour), and when I increased the VTT to 1.15V I was going out for several hours, so I thought I'd just use Blend. That's when it lasted for 4 hours. Not sure if there's a difference there.

Anyway, I'll test again with the same settings tonight, and see what happens. If it's crashed by the time I wake up I'll increase the VTT a little bit and try again whilst I'm at college.

Leave the PLL voltage where it is now and continue tweaking the VTT. Apparently the 1792 is one of the hardest FFT's for Sandy so running a standard blend may not be consistant especially when your doing tests.

If the the 1344 or 1792 start showing signs of inconsistancy, scrap them and use the custom blend with 90% of available RAM. Start again from 1.15v then work up or down and see which value increases stability. I would say that around 1.125v should be enough VTT, PLL is a weird one, start working your way up from 1.5v. Do one thing at a time and record the data in notepad or something. Leave vcore where it is and hopefully without increasing it we can tweak the other's to get the ctable settings.


Quote:
Originally Posted by $ilent;15026967 
Add me please? wink.gif


Sorry bud, but what happend to realtemp? those temps won't be like that after a 12hour blend run. please run realtemp the same time as prime blend. refer to rule 2:

***REALTEMP must show the duration of how long it's running!!!***




@ everyone in the stable club please post some more BIOS templates.
Quote:
BIOS TEMPLATES

I have created a sheet for BIOS templates, it could be a reference point to other's including oneself and a quick 'copy and paste' whenever required in other threads/posts etc.

Those that have posted their stable systems please spare a few minutes of your time to do this. One more thing, these are the ones im after:
  • Main BIOS page (The advanced settings main page)

  • Full AI tweaker Page including DRAM Timing control

  • CPU Configuration Page


Edited by munaim1 - 9/22/11 at 11:15am
it looks alive
(17 items)
 
Sandy Transformed
(69 photos)
 
CPUMotherboardGraphicsRAM
i5 2500K [5ghz 1.44v 24/7] Asus Maximus IV Extreme SLI GTX 460 @ 920/1840/4100 [1.11v] 4GB Dominator GT @ 2133mhz CL8 [1.65v] 
Hard DriveHard DriveCoolingOS
Intel X25-M G2 80GB 3x Samsung F3 500GB RAID 0 EK Supreme HF Full Copper Windows 7 Ultimate 64bit 
MonitorPowerCaseAudio
LG42SL9500 42" 1080p [Surround Soon] XFX XXX Edition 650w Xigmatec Elysium JVC HA-RX700 [foam mod] 
  hide details  
Reply
it looks alive
(17 items)
 
Sandy Transformed
(69 photos)
 
CPUMotherboardGraphicsRAM
i5 2500K [5ghz 1.44v 24/7] Asus Maximus IV Extreme SLI GTX 460 @ 920/1840/4100 [1.11v] 4GB Dominator GT @ 2133mhz CL8 [1.65v] 
Hard DriveHard DriveCoolingOS
Intel X25-M G2 80GB 3x Samsung F3 500GB RAID 0 EK Supreme HF Full Copper Windows 7 Ultimate 64bit 
MonitorPowerCaseAudio
LG42SL9500 42" 1080p [Surround Soon] XFX XXX Edition 650w Xigmatec Elysium JVC HA-RX700 [foam mod] 
  hide details  
Reply
post #4092 of 10702
Right, here we go! I accidentally reset my RealTemp when trying to drag it, but the Prime95 test shows 12 hours. I also apologise for the full-size image, but it needs to be!

validationy.jpg

Edit: Screenshot optimised.
Edited by Smo - 9/22/11 at 1:06pm
My System
(17 items)
 
  
CPUMotherboardGraphicsRAM
[i7 2600k - 5.XGHz @ X.XXv] [ASUS P8P67 Pro B3] [2x MSI 7970s in Crossfire @ 1125/1650] [8GB G.Skill Ripjaws X 2x4GB] 
Hard DriveHard DriveCoolingCooling
[2TB Hitachi] [Crucial M4 SSD 64GB] [Antec Kuhler H20 920] [Lian-Li BZ BZ-502B] 
CoolingOSMonitorKeyboard
[G.Skill Turbulence II RAM Cooler] [Windows 7 Ultimate 64bit] [2x BenQ XL2410T @ 120Hz] [Razer Lycosa] 
PowerCaseMouseMouse Pad
[Corsair AX1200] [Silverstone Raven RV02-EW] [Razer DeathAdder] [Razer Goliathus] 
  hide details  
Reply
My System
(17 items)
 
  
CPUMotherboardGraphicsRAM
[i7 2600k - 5.XGHz @ X.XXv] [ASUS P8P67 Pro B3] [2x MSI 7970s in Crossfire @ 1125/1650] [8GB G.Skill Ripjaws X 2x4GB] 
Hard DriveHard DriveCoolingCooling
[2TB Hitachi] [Crucial M4 SSD 64GB] [Antec Kuhler H20 920] [Lian-Li BZ BZ-502B] 
CoolingOSMonitorKeyboard
[G.Skill Turbulence II RAM Cooler] [Windows 7 Ultimate 64bit] [2x BenQ XL2410T @ 120Hz] [Razer Lycosa] 
PowerCaseMouseMouse Pad
[Corsair AX1200] [Silverstone Raven RV02-EW] [Razer DeathAdder] [Razer Goliathus] 
  hide details  
Reply
post #4093 of 10702
ahh ill leave it then, cba running another 12 hr blend lol
Current rig
(11 items)
 
  
Reply
Current rig
(11 items)
 
  
Reply
post #4094 of 10702
Thread Starter 
wow smo 56k warning bud but nice desktop nevertheless.

Added, realtemp didn't reset, shows 11:44 which is fine for 12hours smile.gif

Thanks for contributing to the thread, now care to post you bios settings as intructed above while you wait until the spreadsheet refresh's?


Grab your sig and wear it proudly smile.gif

[php]
[THREAD=968053][post-flame-small.gif] The Sandy STABLE Club [post-flame-small.gif][/THREAD]
[/php]
Edited by munaim1 - 9/22/11 at 12:43pm
it looks alive
(17 items)
 
Sandy Transformed
(69 photos)
 
CPUMotherboardGraphicsRAM
i5 2500K [5ghz 1.44v 24/7] Asus Maximus IV Extreme SLI GTX 460 @ 920/1840/4100 [1.11v] 4GB Dominator GT @ 2133mhz CL8 [1.65v] 
Hard DriveHard DriveCoolingOS
Intel X25-M G2 80GB 3x Samsung F3 500GB RAID 0 EK Supreme HF Full Copper Windows 7 Ultimate 64bit 
MonitorPowerCaseAudio
LG42SL9500 42" 1080p [Surround Soon] XFX XXX Edition 650w Xigmatec Elysium JVC HA-RX700 [foam mod] 
  hide details  
Reply
it looks alive
(17 items)
 
Sandy Transformed
(69 photos)
 
CPUMotherboardGraphicsRAM
i5 2500K [5ghz 1.44v 24/7] Asus Maximus IV Extreme SLI GTX 460 @ 920/1840/4100 [1.11v] 4GB Dominator GT @ 2133mhz CL8 [1.65v] 
Hard DriveHard DriveCoolingOS
Intel X25-M G2 80GB 3x Samsung F3 500GB RAID 0 EK Supreme HF Full Copper Windows 7 Ultimate 64bit 
MonitorPowerCaseAudio
LG42SL9500 42" 1080p [Surround Soon] XFX XXX Edition 650w Xigmatec Elysium JVC HA-RX700 [foam mod] 
  hide details  
Reply
post #4095 of 10702
Quote:
Originally Posted by munaim1;15028544 
wow smo 56k warning bud but nice desktop nevertheless.

Added, realtemp didn't reset, shows 11:44 which is fine for 12hours smile.gif

Thanks for contributing to the thread, now care to post you bios settings as intructed above while you wait until the spreadsheet refresh's?


Grab your sig and wear it proudly smile.gif

[php]
[THREAD=968053][post-flame-small.gif] The Sandy STABLE Club [post-flame-small.gif][/THREAD]
[/php]

Yeah sure, sorry! If it helps I can optimise the image a bit, I left it high-res for proof.

So starting with the basics it's an i5 2500k overclocked to 4.7GHz @ 1.424v and cooled by an Antec Kuhler H2O 920 with Coolermaster Sickleflows in Push/Pull at 50% speed.

My BIOS settings are;
Quote:
Multiplier: 47x
LLC: Ultra High
VRM Freq: 350
Phase: Extreme
Duty: Extreme
CCC: 140%
Offset: +0.085
VCCIO: Auto
PLL: 1.55v
C3/C6: Disabled
PLL Overvoltage: Enabled

I'm very tempted to bump the BUS speed to see if I can manage something like 47x102 at the same voltage.
My System
(17 items)
 
  
CPUMotherboardGraphicsRAM
[i7 2600k - 5.XGHz @ X.XXv] [ASUS P8P67 Pro B3] [2x MSI 7970s in Crossfire @ 1125/1650] [8GB G.Skill Ripjaws X 2x4GB] 
Hard DriveHard DriveCoolingCooling
[2TB Hitachi] [Crucial M4 SSD 64GB] [Antec Kuhler H20 920] [Lian-Li BZ BZ-502B] 
CoolingOSMonitorKeyboard
[G.Skill Turbulence II RAM Cooler] [Windows 7 Ultimate 64bit] [2x BenQ XL2410T @ 120Hz] [Razer Lycosa] 
PowerCaseMouseMouse Pad
[Corsair AX1200] [Silverstone Raven RV02-EW] [Razer DeathAdder] [Razer Goliathus] 
  hide details  
Reply
My System
(17 items)
 
  
CPUMotherboardGraphicsRAM
[i7 2600k - 5.XGHz @ X.XXv] [ASUS P8P67 Pro B3] [2x MSI 7970s in Crossfire @ 1125/1650] [8GB G.Skill Ripjaws X 2x4GB] 
Hard DriveHard DriveCoolingCooling
[2TB Hitachi] [Crucial M4 SSD 64GB] [Antec Kuhler H20 920] [Lian-Li BZ BZ-502B] 
CoolingOSMonitorKeyboard
[G.Skill Turbulence II RAM Cooler] [Windows 7 Ultimate 64bit] [2x BenQ XL2410T @ 120Hz] [Razer Lycosa] 
PowerCaseMouseMouse Pad
[Corsair AX1200] [Silverstone Raven RV02-EW] [Razer DeathAdder] [Razer Goliathus] 
  hide details  
Reply
post #4096 of 10702
Thread Starter 
Quote:
Originally Posted by Smo;15028715 
Yeah sure, sorry! If it helps I can optimise the image a bit, I left it high-res for proof.

So starting with the basics it's an i5 2500k overclocked to 4.7GHz @ 1.424v and cooled by an Antec Kuhler H2O 920 with Coolermaster Sickleflows in Push/Pull at 50% speed.

My BIOS settings are;



I'm very tempted to bump the BUS speed to see if I can manage something like 47x102 at the same voltage.

It might help if you crop it a little lol


When you can, please a couple screenshots of you BIOS. Thanks again. I would advise against playing around with the BCLK, it will more than likely cause instability, only should be upped if you're trying to squeeze every last mhz you an from it (suicide runs).
it looks alive
(17 items)
 
Sandy Transformed
(69 photos)
 
CPUMotherboardGraphicsRAM
i5 2500K [5ghz 1.44v 24/7] Asus Maximus IV Extreme SLI GTX 460 @ 920/1840/4100 [1.11v] 4GB Dominator GT @ 2133mhz CL8 [1.65v] 
Hard DriveHard DriveCoolingOS
Intel X25-M G2 80GB 3x Samsung F3 500GB RAID 0 EK Supreme HF Full Copper Windows 7 Ultimate 64bit 
MonitorPowerCaseAudio
LG42SL9500 42" 1080p [Surround Soon] XFX XXX Edition 650w Xigmatec Elysium JVC HA-RX700 [foam mod] 
  hide details  
Reply
it looks alive
(17 items)
 
Sandy Transformed
(69 photos)
 
CPUMotherboardGraphicsRAM
i5 2500K [5ghz 1.44v 24/7] Asus Maximus IV Extreme SLI GTX 460 @ 920/1840/4100 [1.11v] 4GB Dominator GT @ 2133mhz CL8 [1.65v] 
Hard DriveHard DriveCoolingOS
Intel X25-M G2 80GB 3x Samsung F3 500GB RAID 0 EK Supreme HF Full Copper Windows 7 Ultimate 64bit 
MonitorPowerCaseAudio
LG42SL9500 42" 1080p [Surround Soon] XFX XXX Edition 650w Xigmatec Elysium JVC HA-RX700 [foam mod] 
  hide details  
Reply
post #4097 of 10702
Quote:
Originally Posted by munaim1;15028794 
It might help if you crop it a little lol


When you can, please a couple screenshots of you BIOS. Thanks again. I would advise against playing around with the BCLK, it will more than likely cause instability, only should be upped if you're trying to squeeze every last mhz you an from it (suicide runs).

I've just halfed the size of the screenshot (in terms of bandwidth).

I'll have a look around for my USB stick, see if I can get some shots of my BIOS. I know it's around here somewhere...
My System
(17 items)
 
  
CPUMotherboardGraphicsRAM
[i7 2600k - 5.XGHz @ X.XXv] [ASUS P8P67 Pro B3] [2x MSI 7970s in Crossfire @ 1125/1650] [8GB G.Skill Ripjaws X 2x4GB] 
Hard DriveHard DriveCoolingCooling
[2TB Hitachi] [Crucial M4 SSD 64GB] [Antec Kuhler H20 920] [Lian-Li BZ BZ-502B] 
CoolingOSMonitorKeyboard
[G.Skill Turbulence II RAM Cooler] [Windows 7 Ultimate 64bit] [2x BenQ XL2410T @ 120Hz] [Razer Lycosa] 
PowerCaseMouseMouse Pad
[Corsair AX1200] [Silverstone Raven RV02-EW] [Razer DeathAdder] [Razer Goliathus] 
  hide details  
Reply
My System
(17 items)
 
  
CPUMotherboardGraphicsRAM
[i7 2600k - 5.XGHz @ X.XXv] [ASUS P8P67 Pro B3] [2x MSI 7970s in Crossfire @ 1125/1650] [8GB G.Skill Ripjaws X 2x4GB] 
Hard DriveHard DriveCoolingCooling
[2TB Hitachi] [Crucial M4 SSD 64GB] [Antec Kuhler H20 920] [Lian-Li BZ BZ-502B] 
CoolingOSMonitorKeyboard
[G.Skill Turbulence II RAM Cooler] [Windows 7 Ultimate 64bit] [2x BenQ XL2410T @ 120Hz] [Razer Lycosa] 
PowerCaseMouseMouse Pad
[Corsair AX1200] [Silverstone Raven RV02-EW] [Razer DeathAdder] [Razer Goliathus] 
  hide details  
Reply
post #4098 of 10702
Thread Starter 
Quote:
Originally Posted by Smo;15028845 
I've just halfed the size of the screenshot (in terms of bandwidth).

I'll have a look around for my USB stick, see if I can get some shots of my BIOS. I know it's around here somewhere...

cool thanks. smile.gif
it looks alive
(17 items)
 
Sandy Transformed
(69 photos)
 
CPUMotherboardGraphicsRAM
i5 2500K [5ghz 1.44v 24/7] Asus Maximus IV Extreme SLI GTX 460 @ 920/1840/4100 [1.11v] 4GB Dominator GT @ 2133mhz CL8 [1.65v] 
Hard DriveHard DriveCoolingOS
Intel X25-M G2 80GB 3x Samsung F3 500GB RAID 0 EK Supreme HF Full Copper Windows 7 Ultimate 64bit 
MonitorPowerCaseAudio
LG42SL9500 42" 1080p [Surround Soon] XFX XXX Edition 650w Xigmatec Elysium JVC HA-RX700 [foam mod] 
  hide details  
Reply
it looks alive
(17 items)
 
Sandy Transformed
(69 photos)
 
CPUMotherboardGraphicsRAM
i5 2500K [5ghz 1.44v 24/7] Asus Maximus IV Extreme SLI GTX 460 @ 920/1840/4100 [1.11v] 4GB Dominator GT @ 2133mhz CL8 [1.65v] 
Hard DriveHard DriveCoolingOS
Intel X25-M G2 80GB 3x Samsung F3 500GB RAID 0 EK Supreme HF Full Copper Windows 7 Ultimate 64bit 
MonitorPowerCaseAudio
LG42SL9500 42" 1080p [Surround Soon] XFX XXX Edition 650w Xigmatec Elysium JVC HA-RX700 [foam mod] 
  hide details  
Reply
post #4099 of 10702
Quote:
Originally Posted by munaim1;15022403 
load load, idle or random bsod right? It's quite common with Sandybridge.

maybe. but i haven't had a single 124-bsod when either using stock settings or running at 4ghz.
i really hope i could fix it by doing something else than upping the core voltage because i wouldn't want the cores to get any hotter under load.
Quote:
How have you set your C states? read the first post of the thread under Random / Idle BSODS & Tips
section and that should hopefully fix the problem for you.

well... it talks about either having everything enabled OR some stuff disabled when using offset voltage. but i don't use offset voltage, have everything enabled but still got that crash.
Quote:
Originally Posted by Rops84;15023133 
I had the same porblem as u and i might be eable to help u but u need to post all ur settings.
U can post screenshots of ASrock AXTU(harware monitoring+overclocking) and let me know which LLC setting u use.

there you go:

1109211832301.jpg

1109211832421.jpg

1109211833201.jpg

1109211833351.jpg

1109211833561.jpg
My System
(13 items)
 
  
CPUMotherboardGraphicsRAM
i7-2600K @ 4.49Ghz ASRock P67 Extreme4 Gen3 SLI Geforce GTX 570 16GB Corsair CMZ16GX3M4A1600C9 
Hard DriveOptical DriveOSMonitor
Crucial M4-CT064M4SSD2 LG GH22NS70 Windows 7 Ultimate x64 IBM Thinkvision C220P 
PowerCaseMouse
RaidMax RX-850AE Rosewill Challenger X7 XL-750BK 
  hide details  
Reply
My System
(13 items)
 
  
CPUMotherboardGraphicsRAM
i7-2600K @ 4.49Ghz ASRock P67 Extreme4 Gen3 SLI Geforce GTX 570 16GB Corsair CMZ16GX3M4A1600C9 
Hard DriveOptical DriveOSMonitor
Crucial M4-CT064M4SSD2 LG GH22NS70 Windows 7 Ultimate x64 IBM Thinkvision C220P 
PowerCaseMouse
RaidMax RX-850AE Rosewill Challenger X7 XL-750BK 
  hide details  
Reply
post #4100 of 10702
Thread Starter 
Quote:
Originally Posted by sh4dow;15031635 
maybe. but i haven't had a single 124-bsod when either using stock settings or running at 4ghz.
i really hope i could fix it by doing something else than upping the core voltage because i wouldn't want the cores to get any hotter under load.

well... it talks about either having everything enabled OR some stuff disabled when using offset voltage. but i don't use offset voltage, have everything enabled but still got that crash.

When do you get the bsod? during stress testing, watching youtube etc?
it looks alive
(17 items)
 
Sandy Transformed
(69 photos)
 
CPUMotherboardGraphicsRAM
i5 2500K [5ghz 1.44v 24/7] Asus Maximus IV Extreme SLI GTX 460 @ 920/1840/4100 [1.11v] 4GB Dominator GT @ 2133mhz CL8 [1.65v] 
Hard DriveHard DriveCoolingOS
Intel X25-M G2 80GB 3x Samsung F3 500GB RAID 0 EK Supreme HF Full Copper Windows 7 Ultimate 64bit 
MonitorPowerCaseAudio
LG42SL9500 42" 1080p [Surround Soon] XFX XXX Edition 650w Xigmatec Elysium JVC HA-RX700 [foam mod] 
  hide details  
Reply
it looks alive
(17 items)
 
Sandy Transformed
(69 photos)
 
CPUMotherboardGraphicsRAM
i5 2500K [5ghz 1.44v 24/7] Asus Maximus IV Extreme SLI GTX 460 @ 920/1840/4100 [1.11v] 4GB Dominator GT @ 2133mhz CL8 [1.65v] 
Hard DriveHard DriveCoolingOS
Intel X25-M G2 80GB 3x Samsung F3 500GB RAID 0 EK Supreme HF Full Copper Windows 7 Ultimate 64bit 
MonitorPowerCaseAudio
LG42SL9500 42" 1080p [Surround Soon] XFX XXX Edition 650w Xigmatec Elysium JVC HA-RX700 [foam mod] 
  hide details  
Reply
New Posts  All Forums:Forum Nav:
  Return Home
  Back to Forum: Intel CPUs
  • [Official] The Sandy Stable Club **Guides, Voltages, Temps & BIOS Templates** Inc SPREADSHEET
Overclock.net › Forums › Intel › Intel CPUs › [Official] The Sandy Stable Club **Guides, Voltages, Temps & BIOS Templates** Inc SPREADSHEET