Originally Posted by danielwiley
this should do it. will post all my bios settings later to help everyone learn from my trial and error.
what's the voltage that everyone suggests moving to 1.7 ? I left mine at 1.8 auto for this run. Idk what kind of difference that made. would that lower my temps if I were to change it to the 1.7 everyone seems to be using ?
Excellent, now I can view the whole image without any problems.
Are you talking about the PLL votlage? Im currently using 1.55v, my temps have dropped 3/4 under load (most likely due to the pll voltage (90% sure it is) but could be a result of ambient temps). Im stabilized my overclock using 1.7v and that proved to increase stability, reducing it from 1.8v I mean, however, further testing, I foudn that it's still stable running at 1.55v.
I would recommend working your way up from 1.5v using small increments as possible, it 'should' help temps and stability. Rea the OP regarding the PLL voltage, it should be under the important findings
I'll add your screenshot data in the srpeadsheet now, thanks for contributing to the thread, +rep for your efforts.
It will be avilalbe in the next minute or so.
Finally you can grab the sig and wear it proudly
[CENTER][SIZE="3"][B][THREAD=968053][FONT="Book Antiqua"][:clock:] The Sandy STABLE Club [:clock:][/FONT][/THREAD][/B][/SIZE][/CENTER]