Overclock.net › Forums › Intel › Intel CPUs › [Official] The Sandy Stable Club **Guides, Voltages, Temps & BIOS Templates** Inc SPREADSHEET
New Posts  All Forums:Forum Nav:

[Official] The Sandy Stable Club **Guides, Voltages, Temps & BIOS Templates** Inc SPREADSHEET - Page 436

post #4351 of 10702
Quote:
Originally Posted by bradleyg5 View Post
Hey guys, I just got a p8p67 deluxe and 2500k. I'm doing my first long run of prime. I'm at 103bus and 46multi at 1.41 I'm cooling with a 212+

Maybe answered before but I was a bit shocked by the real temp application showing such a huge variation between cores. I'm seeing a pattern in the results where the middle two cores always run hottest.

Basically I had been running a pretty tame fan profile that sits low until it hits about 74 degrees than ramps up to 100% on both fans(I have sythe 1900rpm on the pull side as well) but 75 degrees on the first core(which seems to be what asus measures can mean mid 80s on the 2nd core.

So basically it said on the site that you shouldn't run them in the 80s. so should I be more aggressive with my fan profile to insure that none of the cores ever hit 80?

could this unevenness also be a result of a bad mounting?(mine seems a little worse than average)

basically whats the deal with the variation.
Could be a few things. Your mounting could be 1. The way the chip it's self is touching the heat spreader. Not all chips make great contact with the heat spreader and causes the cores to vary. If you had no overclock and looked at idle and load, your temps would all be sitting the same or very close I bet. My cores varry. If I turn off my overclock then they all go to about the same under load and at idle.

Now it seems that you are new as the question your asking. I have a question for you. Why are you running your Blck at 103? This is not 1st gen Core i series. You really should not be changing your blck with Sandy bridge. You can, but not really recommended.
Red X9
(20 items)
 
  
CPUMotherboardGraphicsGraphics
4790K @ 5ghz 1.350v 75c max load temps Asus Maximus VI Formula Evga Gtx Titan X @ 1500mhz / 7800mhz +112mv EK Acetal / Nickel / Nickel back plate 
RAMHard DriveHard DriveOptical Drive
Corsair Vengence Pro 32gig 2400mhz c11 red (4x8... 6x 256gig (1.5tb) in Raid 0 , OS / Gaming Drive 2 x Liteon 256gig (512gig) storage drives Asus Dvd-RW 
CoolingCoolingCoolingOS
2x 360mm Alphacool XT45 / 1x 480mm Alphacool Mo... EK X-Res 140 D5 vario Pump/Res combo + EK X-top... EK Supreme HF cpu / EK Acetal / Nickel with Nic... Windows 8.1 64bit 
MonitorMonitorKeyboardPower
Asus ROG Swift 27" 144hz with G-Sync Samsung 65" 7150  Logitech G510s Corsair AX1200 
CaseMouseMouse PadAudio
Thermaltake Core X9 custom painted Red and Black Logitech G602 Wireless Corsair Aluminum Core 2 sided  Bose Companion 5 
  hide details  
Reply
Red X9
(20 items)
 
  
CPUMotherboardGraphicsGraphics
4790K @ 5ghz 1.350v 75c max load temps Asus Maximus VI Formula Evga Gtx Titan X @ 1500mhz / 7800mhz +112mv EK Acetal / Nickel / Nickel back plate 
RAMHard DriveHard DriveOptical Drive
Corsair Vengence Pro 32gig 2400mhz c11 red (4x8... 6x 256gig (1.5tb) in Raid 0 , OS / Gaming Drive 2 x Liteon 256gig (512gig) storage drives Asus Dvd-RW 
CoolingCoolingCoolingOS
2x 360mm Alphacool XT45 / 1x 480mm Alphacool Mo... EK X-Res 140 D5 vario Pump/Res combo + EK X-top... EK Supreme HF cpu / EK Acetal / Nickel with Nic... Windows 8.1 64bit 
MonitorMonitorKeyboardPower
Asus ROG Swift 27" 144hz with G-Sync Samsung 65" 7150  Logitech G510s Corsair AX1200 
CaseMouseMouse PadAudio
Thermaltake Core X9 custom painted Red and Black Logitech G602 Wireless Corsair Aluminum Core 2 sided  Bose Companion 5 
  hide details  
Reply
post #4352 of 10702
I couldn't get 47x multiplier stable. lets me get to 4.7ghz around 1.4vcore
Home desktop
(13 items)
 
  
CPUMotherboardGraphicsRAM
phenom II 945 ASIs M2N-SLI GTX460 patriot 6400 8GB 4x2gb 
Hard DriveOptical DriveOSMonitor
WD 7200rpm black 1TB DVD rw vista 64bit BenQ 24' 
KeyboardPowerCaseMouse
razer arctosa cosair 750w ultra tax razer death adder 
Mouse Pad
steel series roll pad 
  hide details  
Reply
Home desktop
(13 items)
 
  
CPUMotherboardGraphicsRAM
phenom II 945 ASIs M2N-SLI GTX460 patriot 6400 8GB 4x2gb 
Hard DriveOptical DriveOSMonitor
WD 7200rpm black 1TB DVD rw vista 64bit BenQ 24' 
KeyboardPowerCaseMouse
razer arctosa cosair 750w ultra tax razer death adder 
Mouse Pad
steel series roll pad 
  hide details  
Reply
post #4353 of 10702
Quote:
Originally Posted by bradleyg5 View Post
I couldn't get 47x multiplier stable. lets me get to 4.7ghz around 1.4vcore
Did you enable Cpu Pll overvoltage in the bios?
Red X9
(20 items)
 
  
CPUMotherboardGraphicsGraphics
4790K @ 5ghz 1.350v 75c max load temps Asus Maximus VI Formula Evga Gtx Titan X @ 1500mhz / 7800mhz +112mv EK Acetal / Nickel / Nickel back plate 
RAMHard DriveHard DriveOptical Drive
Corsair Vengence Pro 32gig 2400mhz c11 red (4x8... 6x 256gig (1.5tb) in Raid 0 , OS / Gaming Drive 2 x Liteon 256gig (512gig) storage drives Asus Dvd-RW 
CoolingCoolingCoolingOS
2x 360mm Alphacool XT45 / 1x 480mm Alphacool Mo... EK X-Res 140 D5 vario Pump/Res combo + EK X-top... EK Supreme HF cpu / EK Acetal / Nickel with Nic... Windows 8.1 64bit 
MonitorMonitorKeyboardPower
Asus ROG Swift 27" 144hz with G-Sync Samsung 65" 7150  Logitech G510s Corsair AX1200 
CaseMouseMouse PadAudio
Thermaltake Core X9 custom painted Red and Black Logitech G602 Wireless Corsair Aluminum Core 2 sided  Bose Companion 5 
  hide details  
Reply
Red X9
(20 items)
 
  
CPUMotherboardGraphicsGraphics
4790K @ 5ghz 1.350v 75c max load temps Asus Maximus VI Formula Evga Gtx Titan X @ 1500mhz / 7800mhz +112mv EK Acetal / Nickel / Nickel back plate 
RAMHard DriveHard DriveOptical Drive
Corsair Vengence Pro 32gig 2400mhz c11 red (4x8... 6x 256gig (1.5tb) in Raid 0 , OS / Gaming Drive 2 x Liteon 256gig (512gig) storage drives Asus Dvd-RW 
CoolingCoolingCoolingOS
2x 360mm Alphacool XT45 / 1x 480mm Alphacool Mo... EK X-Res 140 D5 vario Pump/Res combo + EK X-top... EK Supreme HF cpu / EK Acetal / Nickel with Nic... Windows 8.1 64bit 
MonitorMonitorKeyboardPower
Asus ROG Swift 27" 144hz with G-Sync Samsung 65" 7150  Logitech G510s Corsair AX1200 
CaseMouseMouse PadAudio
Thermaltake Core X9 custom painted Red and Black Logitech G602 Wireless Corsair Aluminum Core 2 sided  Bose Companion 5 
  hide details  
Reply
post #4354 of 10702
Quote:
Originally Posted by DerComissar View Post
Congratulations!
Out of curiosity, what did you end up setting for your Vdroop? The Low Vdroop setting?
Are you using the 45x multi, and what voltage for the vcore? If you did go to 1.400v., then you should be able to lower it now for 4.5GHz, and still be stable.
For my Dram Voltage, I used the 1.507v. setting in the bios, as there was no exact 1.5v. option.
From what I've read, you should be able to use C1E without it affecting your stability. I may even try that myself once I'm satisfied that my system is stable. Or not

I don't see what you mean by your timings are off in CPU-Z?
Here's a screenshot of my current CPU-Z readings:

That is what I get in CPU-Z, with my memory set in the bios as: 8,8,8,24 1T at 1600MHz.
The "Memory" tab of CPU-Z reports my memory settings correctly, as I have set them in the bios. Yours should too?
My Vdroop is on low. The only options my BIOS gives me is low and auto.
I'm using a 45x multi, and I'm still trying to find my minimum stable voltage. It was 20hours stable at 1.36V, but I would like to bring the voltage down as much as posible.

As for my memory, it does show 9-9-9-24 2T in the Memory tab in CPU-Z, but int the SPD tab it is off for JEDEC #5, #6 and XMP-600 (it shows 10-10-10-27, 11-11-11-30 and 9-9-9-25 respectively). Is this something else and normal, or should they all be saying 9-9-9-24? Also should I switch my command rate to 1T or leave it at 2T?
White Walker
(15 items)
 
  
CPUMotherboardGraphicsRAM
i5 2500K @ 4.5 GHz MSI P67A-G43 Sapphire R9 Fury Nitro G.SKILL Ripjaws X 16GB DDR3-1600 
Hard DriveHard DriveCoolingOS
Adata S511 120GB SSD 1 TB WD Caviar Black 7200RPM CM Hyper 212+ Windows 7 Ultimate 
MonitorPowerCaseMouse
Dell U2711 Corsair TX650 V2 Corsair 600T White Logitech MX-518 
Audio
Asus Xonar STX 
  hide details  
Reply
White Walker
(15 items)
 
  
CPUMotherboardGraphicsRAM
i5 2500K @ 4.5 GHz MSI P67A-G43 Sapphire R9 Fury Nitro G.SKILL Ripjaws X 16GB DDR3-1600 
Hard DriveHard DriveCoolingOS
Adata S511 120GB SSD 1 TB WD Caviar Black 7200RPM CM Hyper 212+ Windows 7 Ultimate 
MonitorPowerCaseMouse
Dell U2711 Corsair TX650 V2 Corsair 600T White Logitech MX-518 
Audio
Asus Xonar STX 
  hide details  
Reply
post #4355 of 10702
Quote:
Originally Posted by jdip View Post
My Vdroop is on low. The only options my BIOS gives me is low and auto.
I'm using a 45x multi, and I'm still trying to find my minimum stable voltage. It was 20hours stable at 1.36V, but I would like to bring the voltage down as much as posible.

As for my memory, it does show 9-9-9-24 2T in the Memory tab in CPU-Z, but int the SPD tab it is off for JEDEC #5, #6 and XMP-600 (it shows 10-10-10-27, 11-11-11-30 and 9-9-9-25 respectively). Is this something else and normal, or should they all be saying 9-9-9-24? Also should I switch my command rate to 1T or leave it at 2T?
The low setting is the one to use. You're doing great! I wish I could run mine that low. If you lower it more, great, but if not, that's a decent voltage.

That spd tab is just a bunch of ratings for your memory at different frequencies for the values it reads. Since you're doing so well at your current memory settings, I'd leave them where you have them set now.
The command rate doesn't make that big of a difference, if it's stable at 2T that's fine. I may have to bump mine down if I don't pass 12 hours of P95 Blend. I ran this set at these settings with my P55 setup, but Sandy Bridge may be a different story
S8 Build
(11 items)
 
  
CPUMotherboardGraphicsRAM
5775C ASUS Maximus VII Hero Titan Xp GSkill DDR3-2133 16GB  
Hard DriveCoolingOSMonitor
Samsung 850 EVO 500GB Air until the loop upgrade Win10 Pro Acer Predator XB271HU 
KeyboardPowerCase
Ducky One TKL UK/ISO Custom EVGA SuperNOVA 1200P2 CaseLabs S8 White 
  hide details  
Reply
S8 Build
(11 items)
 
  
CPUMotherboardGraphicsRAM
5775C ASUS Maximus VII Hero Titan Xp GSkill DDR3-2133 16GB  
Hard DriveCoolingOSMonitor
Samsung 850 EVO 500GB Air until the loop upgrade Win10 Pro Acer Predator XB271HU 
KeyboardPowerCase
Ducky One TKL UK/ISO Custom EVGA SuperNOVA 1200P2 CaseLabs S8 White 
  hide details  
Reply
post #4356 of 10702
Quote:
Originally Posted by DerComissar View Post
The low setting is the one to use. You're doing great! I wish I could run mine that low. If you lower it more, great, but if not, that's a decent voltage.

That spd tab is just a bunch of ratings for your memory at different frequencies for the values it reads. Since you're doing so well at your current memory settings, I'd leave them where you have them set now.
The command rate doesn't make that big of a difference, if it's stable at 2T that's fine. I may have to bump mine down if I don't pass 12 hours of P95 Blend. I ran this set at these settings with my P55 setup, but Sandy Bridge may be a different story
Thanks for the input.

I lowered my vCore to 1.35 and got a crash, but I had also changed my timings to manual, so I will turn XMP back on and switch DRAM to auto since at 1.36 it was stable at those settings. If it crashes, then I will change back to manual and bump up the vCore and then leave it at that
White Walker
(15 items)
 
  
CPUMotherboardGraphicsRAM
i5 2500K @ 4.5 GHz MSI P67A-G43 Sapphire R9 Fury Nitro G.SKILL Ripjaws X 16GB DDR3-1600 
Hard DriveHard DriveCoolingOS
Adata S511 120GB SSD 1 TB WD Caviar Black 7200RPM CM Hyper 212+ Windows 7 Ultimate 
MonitorPowerCaseMouse
Dell U2711 Corsair TX650 V2 Corsair 600T White Logitech MX-518 
Audio
Asus Xonar STX 
  hide details  
Reply
White Walker
(15 items)
 
  
CPUMotherboardGraphicsRAM
i5 2500K @ 4.5 GHz MSI P67A-G43 Sapphire R9 Fury Nitro G.SKILL Ripjaws X 16GB DDR3-1600 
Hard DriveHard DriveCoolingOS
Adata S511 120GB SSD 1 TB WD Caviar Black 7200RPM CM Hyper 212+ Windows 7 Ultimate 
MonitorPowerCaseMouse
Dell U2711 Corsair TX650 V2 Corsair 600T White Logitech MX-518 
Audio
Asus Xonar STX 
  hide details  
Reply
post #4357 of 10702
guys I need to know how to set up prime 95 for OC testing and then submitting to the club

I have 8GB RAM, 5200MB Free, so I set up a custom blend run, for 5200MB RAM, and then, do I touch min and max FFT size or do I leave it at 8k and 4096k respectively?

Just wondering because i'm going to leave it on all night while I'm sleeping and I'd like to know how to set up a custom blend via Prime 95.

Thanks guys
Dell Optiplex 745
(10 items)
 
  
CPUMotherboardGraphicsRAM
Q6600 (incoming) Dell proprietary Intel Q965 Express Chipset XFX HD 5770 (incoming) 4GB Patriot DDR2 800 
Hard DriveOptical DriveCoolingOS
Hitachi Deskstar 160GB 7200RPM DVDRW Stock Windows XP 32 (for the time being) 
MonitorPower
Dell 22" 1680x1050 Corsair CX430 
  hide details  
Reply
Dell Optiplex 745
(10 items)
 
  
CPUMotherboardGraphicsRAM
Q6600 (incoming) Dell proprietary Intel Q965 Express Chipset XFX HD 5770 (incoming) 4GB Patriot DDR2 800 
Hard DriveOptical DriveCoolingOS
Hitachi Deskstar 160GB 7200RPM DVDRW Stock Windows XP 32 (for the time being) 
MonitorPower
Dell 22" 1680x1050 Corsair CX430 
  hide details  
Reply
post #4358 of 10702
Thread Starter 
Quote:
Originally Posted by jam3s View Post
guys I need to know how to set up prime 95 for OC testing and then submitting to the club

I have 8GB RAM, 5200MB Free, so I set up a custom blend run, for 5200MB RAM, and then, do I touch min and max FFT size or do I leave it at 8k and 4096k respectively?

Just wondering because i'm going to leave it on all night while I'm sleeping and I'd like to know how to set up a custom blend via Prime 95.

Thanks guys
Yeah that's it, leave the FFTs alone, 90% of available RAM is good enough so no need to use all of it.

One last thing that some people forget, make sure you run realtemp the same time as prime.
it looks alive
(17 items)
 
Sandy Transformed
(69 photos)
 
CPUMotherboardGraphicsRAM
i5 2500K [5ghz 1.44v 24/7] Asus Maximus IV Extreme SLI GTX 460 @ 920/1840/4100 [1.11v] 4GB Dominator GT @ 2133mhz CL8 [1.65v] 
Hard DriveHard DriveCoolingOS
Intel X25-M G2 80GB 3x Samsung F3 500GB RAID 0 EK Supreme HF Full Copper Windows 7 Ultimate 64bit 
MonitorPowerCaseAudio
LG42SL9500 42" 1080p [Surround Soon] XFX XXX Edition 650w Xigmatec Elysium JVC HA-RX700 [foam mod] 
  hide details  
Reply
it looks alive
(17 items)
 
Sandy Transformed
(69 photos)
 
CPUMotherboardGraphicsRAM
i5 2500K [5ghz 1.44v 24/7] Asus Maximus IV Extreme SLI GTX 460 @ 920/1840/4100 [1.11v] 4GB Dominator GT @ 2133mhz CL8 [1.65v] 
Hard DriveHard DriveCoolingOS
Intel X25-M G2 80GB 3x Samsung F3 500GB RAID 0 EK Supreme HF Full Copper Windows 7 Ultimate 64bit 
MonitorPowerCaseAudio
LG42SL9500 42" 1080p [Surround Soon] XFX XXX Edition 650w Xigmatec Elysium JVC HA-RX700 [foam mod] 
  hide details  
Reply
post #4359 of 10702
Quote:
Originally Posted by munaim1 View Post
Yeah that's it, leave the FFTs alone, 90% of available RAM is good enough so no need to use all of it.

One last thing that some people forget, make sure you run realtemp the same time as prime.
shoot. I forgot. Let me restart it
Dell Optiplex 745
(10 items)
 
  
CPUMotherboardGraphicsRAM
Q6600 (incoming) Dell proprietary Intel Q965 Express Chipset XFX HD 5770 (incoming) 4GB Patriot DDR2 800 
Hard DriveOptical DriveCoolingOS
Hitachi Deskstar 160GB 7200RPM DVDRW Stock Windows XP 32 (for the time being) 
MonitorPower
Dell 22" 1680x1050 Corsair CX430 
  hide details  
Reply
Dell Optiplex 745
(10 items)
 
  
CPUMotherboardGraphicsRAM
Q6600 (incoming) Dell proprietary Intel Q965 Express Chipset XFX HD 5770 (incoming) 4GB Patriot DDR2 800 
Hard DriveOptical DriveCoolingOS
Hitachi Deskstar 160GB 7200RPM DVDRW Stock Windows XP 32 (for the time being) 
MonitorPower
Dell 22" 1680x1050 Corsair CX430 
  hide details  
Reply
post #4360 of 10702
could you please update my profile
K2mil-PC
(21 items)
 
  
CPUMotherboardGraphicsRAM
INTEL CORE I5 2500K @ 4.5 Ghz ASRock Extreme 7 (G3) Asus 1070 Strix OC 16GB @ 1600 |CORSAIR CMZ8GX3M2A1600C9B 
Hard DriveHard DriveHard DriveCooling
Intel 730 SSD 240 GB SATA III Samsung SSD  WD Blue 1TB Zalman CNPS9900 MAX 
OSMonitorKeyboardPower
Windows 10 x64 ASUS ROG Swift PG278Q Logitech K800 Corsair 850i Modular 
CaseMouseMouse PadAudio
Corsair Obsidian 650d Corsair M60 Saitek Cyborg Astro A30 
OtherOtherOtherOther
Saitek X65F HOTAS Saitek Pro Ruder Pedals Saitek Pro Flight Instrument Panel  Trackir 5 
Other
Sound Blaster Z 
  hide details  
Reply
K2mil-PC
(21 items)
 
  
CPUMotherboardGraphicsRAM
INTEL CORE I5 2500K @ 4.5 Ghz ASRock Extreme 7 (G3) Asus 1070 Strix OC 16GB @ 1600 |CORSAIR CMZ8GX3M2A1600C9B 
Hard DriveHard DriveHard DriveCooling
Intel 730 SSD 240 GB SATA III Samsung SSD  WD Blue 1TB Zalman CNPS9900 MAX 
OSMonitorKeyboardPower
Windows 10 x64 ASUS ROG Swift PG278Q Logitech K800 Corsair 850i Modular 
CaseMouseMouse PadAudio
Corsair Obsidian 650d Corsair M60 Saitek Cyborg Astro A30 
OtherOtherOtherOther
Saitek X65F HOTAS Saitek Pro Ruder Pedals Saitek Pro Flight Instrument Panel  Trackir 5 
Other
Sound Blaster Z 
  hide details  
Reply
New Posts  All Forums:Forum Nav:
  Return Home
  Back to Forum: Intel CPUs
  • [Official] The Sandy Stable Club **Guides, Voltages, Temps & BIOS Templates** Inc SPREADSHEET
Overclock.net › Forums › Intel › Intel CPUs › [Official] The Sandy Stable Club **Guides, Voltages, Temps & BIOS Templates** Inc SPREADSHEET