Overclock.net › Forums › Intel › Intel CPUs › [Official] The Sandy Stable Club **Guides, Voltages, Temps & BIOS Templates** Inc SPREADSHEET
New Posts  All Forums:Forum Nav:

[Official] The Sandy Stable Club **Guides, Voltages, Temps & BIOS Templates** Inc SPREADSHEET - Page 495

post #4941 of 10702
I started out with about 1.350 vcore and auto ~1.830 PLL. Slowly lowered the PLL each time booting and runing 1792's + IBT, ended up at 1.5 without any issues, no crashes no bsods no anything trough the whole process. Then I lowered my vcore to 1.200 because why not in result it wouldnt boot so I upped it to 1.216 and it booted, again ran some tests IBT - no issues, 1792 worker #2 failing 3 minutes in. Added some more vcore 1.224 (which was -0.030v offset), same thing tests worker #2 failing ~5 mins in.
I upped it to 1.248 (-0.010v offset) skipping 1.232(-0.020). IBT - no issues, 1792 for about an hour all workers doing their jobs, good. So I went for a 12h custom blend with 6500mb ram ~89% and here I am

This chip sure got potential I am very impressed by it, the board is great too would recommend to anyone. Might add that I didnt get a single crash or BSOD trough the whole process, not counting the one time it wouldnt boot at low vcore, and believe me I tried everything I even played some sc2 on the IGPU while running prime, stupid I know but whatever Im loving my sandy!

edit: will post bios screenshots soon-ish

Edited by eThix - 10/25/11 at 5:04am
    
CPUMotherboardGraphicsRAM
i5 2500k @ 4.5Ghz 1.248v ASRock Z68 Extreme4 Gen3 MSI GTX 560 Ti Hawk Corsair Vengeance 8GB 1600MHz CL8 
Hard DriveOptical DriveCoolingOS
WD Caviar Black 1TB Lite-On iHAS624 Corsair H100 Windows 7 Ultimate 64bit 
MonitorKeyboardPowerCase
Samsung T220 Logitech G15 Corsair AX850 Corsair 600T SE 
MouseMouse Pad
Logitech G5 Steelseries QcK 
  hide details  
Reply
    
CPUMotherboardGraphicsRAM
i5 2500k @ 4.5Ghz 1.248v ASRock Z68 Extreme4 Gen3 MSI GTX 560 Ti Hawk Corsair Vengeance 8GB 1600MHz CL8 
Hard DriveOptical DriveCoolingOS
WD Caviar Black 1TB Lite-On iHAS624 Corsair H100 Windows 7 Ultimate 64bit 
MonitorKeyboardPowerCase
Samsung T220 Logitech G15 Corsair AX850 Corsair 600T SE 
MouseMouse Pad
Logitech G5 Steelseries QcK 
  hide details  
Reply
post #4942 of 10702
Hey guys
Got my 2500k and stuff today and I've been playing around a bit.
Does anyone know how bad it is to keep your LLC at level 1 (The most stable setting on AsRock's)
I know it was bad on platforms before 1155 (Because of nasty voltage spike when the sudden current is being pulled = lots of wattage going through CPU) but without it my vcore will drop almost 0.1V from idle to load :O Even on level 2!
My bios is 1.10 from the asrock website btw.
Will be OC'in and checking in to this thread
    
CPUMotherboardGraphicsRAM
2500K 5GHz@1.35V Asrock Z68 Extreme3 gen 3 Asus 7850 DC2 Ripjaws 1333-5-7-5 1.5V 
Hard DrivePowerMouse
Samsung F1 320gb Antec TruePower Trio 650W MIE 3.0 <3 
  hide details  
Reply
    
CPUMotherboardGraphicsRAM
2500K 5GHz@1.35V Asrock Z68 Extreme3 gen 3 Asus 7850 DC2 Ripjaws 1333-5-7-5 1.5V 
Hard DrivePowerMouse
Samsung F1 320gb Antec TruePower Trio 650W MIE 3.0 <3 
  hide details  
Reply
post #4943 of 10702
munaim, thanks for adding us in the sheet, but you didn't make a post allowing us newcomers to grab our sig and wear it proudly

Is it possible that you make a post annoucing each new name and congratulating us by officially giving the golden eldorado of a signature that you'd gently copy / paste again just for us? You know, it's like a ritual

* Kiddie wants treat *

lol


EDIT: One question... I dont understand... Now, I have two different BIOS profile settings - one for 4.5 OC (manual Vcore )and one for 4.8 OC (Offset Vcore) and now, when I immediately lauch CPU-z while nothing else is running (ie. after boot), I don't have 1600mhz showing up anymore (idle) but both will instantly and systematically show up 4.5 / 4.8 just like if the computer was on lçoad, which is not because it is on idle. Put it simply the multi will always be stuck to 45 or 48. Any thoughts?
Something to do with all the power savingfeatures I disabled, I guess... Which one?
Edited by DaGoat - 10/25/11 at 11:25am
post #4944 of 10702
Quote:
Originally Posted by DaGoat View Post
munaim, thanks for adding us in the sheet, but you didn't make a post allowing us newcomers to grab our sig and wear it proudly

Is it possible that you make a post annoucing each new name and congratulating us by officially giving the golden eldorado of a signature that you'd gently copy / paste again just for us? You know, it's like a ritual

* Kiddie wants treat *

lol


EDIT: One question... I dont understand... Now, I have two different BIOS profile settings - one for 4.5 OC (manual Vcore )and one for 4.8 OC (Offset Vcore) and now, when I immediately lauch CPU-z while nothing else is running (ie. after boot), I don't have 1600mhz showing up anymore (idle) but both will instantly and systematically show up 4.5 / 4.8 just like if the computer was on lçoad, which is not because it is on idle. Put it simply the multi will always be stuck to 45 or 48. Any thoughts?
Something to do with all the power savingfeatures I disabled, I guess... Which one?
I have the same problem here.
My System
(18 items)
 
  
CPUMotherboardGraphicsRAM
Intel Core i7-2600K Asus P8Z68-V/GEN3 EVGA GTX 1080 Ti FTW3 2x8GB G.Skill Trident X (F3-2400C10D-16GTX) @ 2... 
Hard DriveHard DriveCoolingOS
Samsung 850 EVO 500GB Samsung Spinpoint F3 1TB CPU: Swiftech H220-X Windows 10 x64 Enterprise 
MonitorKeyboardPowerCase
Dell S2716DG Ducky Shine 3 DK9008 MX Brown and Red LED Seasonic P-760 SS-760XP2 Cooler Master HAF 922 
MouseMouse PadAudioAudio
Roccat Savu Steelseries QCK Mass Edifier HCS2330 2.1 Speaker System (using Onboa... HyperX Cloud Revolver Gaming Headset 
Other
APC BR1500GI UPS 
  hide details  
Reply
My System
(18 items)
 
  
CPUMotherboardGraphicsRAM
Intel Core i7-2600K Asus P8Z68-V/GEN3 EVGA GTX 1080 Ti FTW3 2x8GB G.Skill Trident X (F3-2400C10D-16GTX) @ 2... 
Hard DriveHard DriveCoolingOS
Samsung 850 EVO 500GB Samsung Spinpoint F3 1TB CPU: Swiftech H220-X Windows 10 x64 Enterprise 
MonitorKeyboardPowerCase
Dell S2716DG Ducky Shine 3 DK9008 MX Brown and Red LED Seasonic P-760 SS-760XP2 Cooler Master HAF 922 
MouseMouse PadAudioAudio
Roccat Savu Steelseries QCK Mass Edifier HCS2330 2.1 Speaker System (using Onboa... HyperX Cloud Revolver Gaming Headset 
Other
APC BR1500GI UPS 
  hide details  
Reply
post #4945 of 10702
I'm pretty confident it's a disabled power saving feature... Like me, you disabled everything, CPUID, EPU, C1, C3, C6, Speedstep, and all?
post #4946 of 10702
I have all those features enabled.
My System
(18 items)
 
  
CPUMotherboardGraphicsRAM
Intel Core i7-2600K Asus P8Z68-V/GEN3 EVGA GTX 1080 Ti FTW3 2x8GB G.Skill Trident X (F3-2400C10D-16GTX) @ 2... 
Hard DriveHard DriveCoolingOS
Samsung 850 EVO 500GB Samsung Spinpoint F3 1TB CPU: Swiftech H220-X Windows 10 x64 Enterprise 
MonitorKeyboardPowerCase
Dell S2716DG Ducky Shine 3 DK9008 MX Brown and Red LED Seasonic P-760 SS-760XP2 Cooler Master HAF 922 
MouseMouse PadAudioAudio
Roccat Savu Steelseries QCK Mass Edifier HCS2330 2.1 Speaker System (using Onboa... HyperX Cloud Revolver Gaming Headset 
Other
APC BR1500GI UPS 
  hide details  
Reply
My System
(18 items)
 
  
CPUMotherboardGraphicsRAM
Intel Core i7-2600K Asus P8Z68-V/GEN3 EVGA GTX 1080 Ti FTW3 2x8GB G.Skill Trident X (F3-2400C10D-16GTX) @ 2... 
Hard DriveHard DriveCoolingOS
Samsung 850 EVO 500GB Samsung Spinpoint F3 1TB CPU: Swiftech H220-X Windows 10 x64 Enterprise 
MonitorKeyboardPowerCase
Dell S2716DG Ducky Shine 3 DK9008 MX Brown and Red LED Seasonic P-760 SS-760XP2 Cooler Master HAF 922 
MouseMouse PadAudioAudio
Roccat Savu Steelseries QCK Mass Edifier HCS2330 2.1 Speaker System (using Onboa... HyperX Cloud Revolver Gaming Headset 
Other
APC BR1500GI UPS 
  hide details  
Reply
post #4947 of 10702
LOL

OK so it's not speedstep anyway since I enabled it.
Tip: you should really disable CPUID and EPU at least.

But what is it then?
post #4948 of 10702
are you sure its enabled and not Auto?
The Rig
(13 items)
 
  
CPUMotherboardGraphicsRAM
i5 2500K 4.8ghz - 1.33v Asus P8P67 Pro Rev 3.1 MSI GTX460 Hawk Talon Attack 950mhz core 8GB Kingston HyperX Genesis 1600 
Hard DriveOptical DriveOSMonitor
500GB WD Cavair Black, 1TB WD Cavair Green LG Lightscribe DVD Writer, LG Blu-Ray Drive Windows 7 Pro x64 LG 22" lcd monitor (1680x1050) 
KeyboardPowerCaseMouse
Logitech Wireless Corsair HX650 Cooler Master CM690 Logitech Wireless Laser 
  hide details  
Reply
The Rig
(13 items)
 
  
CPUMotherboardGraphicsRAM
i5 2500K 4.8ghz - 1.33v Asus P8P67 Pro Rev 3.1 MSI GTX460 Hawk Talon Attack 950mhz core 8GB Kingston HyperX Genesis 1600 
Hard DriveOptical DriveOSMonitor
500GB WD Cavair Black, 1TB WD Cavair Green LG Lightscribe DVD Writer, LG Blu-Ray Drive Windows 7 Pro x64 LG 22" lcd monitor (1680x1050) 
KeyboardPowerCaseMouse
Logitech Wireless Corsair HX650 Cooler Master CM690 Logitech Wireless Laser 
  hide details  
Reply
post #4949 of 10702
Why would you guys disable them?
PS. my OC with 4.9G@1.35V was stable through 20 minutes of 1792kb FFT length :O
Folding didn't work but that could have been because of something else. I'm too tired to find out the limits today but so far my chip seems nice Right now I'm folding 4.7@1.32V and it has been folding for 4 hours now. I didn't stress test it but I just guessed that this would be stable
    
CPUMotherboardGraphicsRAM
2500K 5GHz@1.35V Asrock Z68 Extreme3 gen 3 Asus 7850 DC2 Ripjaws 1333-5-7-5 1.5V 
Hard DrivePowerMouse
Samsung F1 320gb Antec TruePower Trio 650W MIE 3.0 <3 
  hide details  
Reply
    
CPUMotherboardGraphicsRAM
2500K 5GHz@1.35V Asrock Z68 Extreme3 gen 3 Asus 7850 DC2 Ripjaws 1333-5-7-5 1.5V 
Hard DrivePowerMouse
Samsung F1 320gb Antec TruePower Trio 650W MIE 3.0 <3 
  hide details  
Reply
post #4950 of 10702
Quote:
Originally Posted by Skiivari View Post
Hey guys
Got my 2500k and stuff today and I've been playing around a bit.
Does anyone know how bad it is to keep your LLC at level 1 (The most stable setting on AsRock's)
I know it was bad on platforms before 1155 (Because of nasty voltage spike when the sudden current is being pulled = lots of wattage going through CPU) but without it my vcore will drop almost 0.1V from idle to load :O Even on level 2!
My bios is 1.10 from the asrock website btw.
Will be OC'in and checking in to this thread
Interested in this also. I'm currently using level 3.

What are some tips to getting vcore lower?
La Bestia
(14 items)
 
  
CPUMotherboardGraphicsRAM
i5 2500k @ 5GHz AsRock P67 Extreme4 Gen3 Galaxy GTX 560 Ti GC G. Skill 8gb 1600MHz Sniper Series 
Hard DriveOptical DriveCoolingOS
1TB Samsung Spinpoint Generic Coolermaster Hyper 212+ Windows Ultimate 64bit 
MonitorKeyboardPowerCase
Asus 20in LCD Asus CoolerMaster GX650w CoolerMaster HAF 912 
MouseMouse Pad
Logitech G5 Razer Goliathus 
  hide details  
Reply
La Bestia
(14 items)
 
  
CPUMotherboardGraphicsRAM
i5 2500k @ 5GHz AsRock P67 Extreme4 Gen3 Galaxy GTX 560 Ti GC G. Skill 8gb 1600MHz Sniper Series 
Hard DriveOptical DriveCoolingOS
1TB Samsung Spinpoint Generic Coolermaster Hyper 212+ Windows Ultimate 64bit 
MonitorKeyboardPowerCase
Asus 20in LCD Asus CoolerMaster GX650w CoolerMaster HAF 912 
MouseMouse Pad
Logitech G5 Razer Goliathus 
  hide details  
Reply
New Posts  All Forums:Forum Nav:
  Return Home
  Back to Forum: Intel CPUs
  • [Official] The Sandy Stable Club **Guides, Voltages, Temps & BIOS Templates** Inc SPREADSHEET
Overclock.net › Forums › Intel › Intel CPUs › [Official] The Sandy Stable Club **Guides, Voltages, Temps & BIOS Templates** Inc SPREADSHEET