Overclock.net › Forums › Intel › Intel CPUs › [Official] The Sandy Stable Club **Guides, Voltages, Temps & BIOS Templates** Inc SPREADSHEET
New Posts  All Forums:Forum Nav:

[Official] The Sandy Stable Club **Guides, Voltages, Temps & BIOS Templates** Inc SPREADSHEET - Page 496

post #4951 of 10702
Quote:
Originally Posted by Skiivari;15449875 
Why would you guys disable them?
PS. my OC with 4.9G@1.35V was stable through 20 minutes of 1792kb FFT length :O
Folding didn't work but that could have been because of something else. I'm too tired to find out the limits today but so far my chip seems nice smile.gif Right now I'm folding 4.7@1.32V and it has been folding for 4 hours now. I didn't stress test it but I just guessed that this would be stable biggrin.gif

It could indeed, I hope for you, but 4 hours is far from a good indicator of stability. I already had BSODs after 8 or 10 hours.

12 hours is a safe minimum IMHO. 16 hours is better. 24 hours is tip -top.

MY OC 4.8 Ghz @ 1.37v was stable for 36 minutes of 1792 FFT yet it didn't pass 12 hours blend.
post #4952 of 10702
Hey what's a 009c BSOD please?
post #4953 of 10702
Quote:
Originally Posted by DaGoat;15450088 
Hey what's a 009c BSOD please?

BSOD Codes for SandyBridge
0x124 = add/remove vcore or QPI/VTT voltage (usually Vcore, once it was QPI/VTT)
0x101 = add more vcore
0x50 = RAM timings/Frequency add DDR3 voltage or add QPI/VTT
0x1E = add more vcore
0x3B = add more vcore
0xD1 = add QPI/VTT voltage
“0x9C = QPI/VTT most likely, but increasing vcore has helped in some instances”
0X109 = add DDR3 voltage
0x0A = add QPI/VTT voltage
Sandy
(13 items)
 
  
CPUMotherboardGraphicsRAM
i5 2500K ASUS P8Z68-V Pro HIS IceQ 6970 8 GB GSkill Ripjaws X 
Hard DriveOptical DriveOSMonitor
WD Caviar Black 1 TB Lite-On Windows 7 Professional 64 bit Samsung T240 
KeyboardPowerCaseMouse
Filco Majestouch 2 Tenkeyless with Blues PC Power and Cooling Silencer 760 Watt Coolermaster HAF X Razer Naga 
  hide details  
Reply
Sandy
(13 items)
 
  
CPUMotherboardGraphicsRAM
i5 2500K ASUS P8Z68-V Pro HIS IceQ 6970 8 GB GSkill Ripjaws X 
Hard DriveOptical DriveOSMonitor
WD Caviar Black 1 TB Lite-On Windows 7 Professional 64 bit Samsung T240 
KeyboardPowerCaseMouse
Filco Majestouch 2 Tenkeyless with Blues PC Power and Cooling Silencer 760 Watt Coolermaster HAF X Razer Naga 
  hide details  
Reply
post #4954 of 10702
Thanks.

What's QPI/VTT?
post #4955 of 10702
Quote:
Originally Posted by DaGoat;15450289 
Thanks.

What's QPI/VTT?

VCCIO, what's your ram rated at, and what do you have for VCCIO?
Sandy
(13 items)
 
  
CPUMotherboardGraphicsRAM
i5 2500K ASUS P8Z68-V Pro HIS IceQ 6970 8 GB GSkill Ripjaws X 
Hard DriveOptical DriveOSMonitor
WD Caviar Black 1 TB Lite-On Windows 7 Professional 64 bit Samsung T240 
KeyboardPowerCaseMouse
Filco Majestouch 2 Tenkeyless with Blues PC Power and Cooling Silencer 760 Watt Coolermaster HAF X Razer Naga 
  hide details  
Reply
Sandy
(13 items)
 
  
CPUMotherboardGraphicsRAM
i5 2500K ASUS P8Z68-V Pro HIS IceQ 6970 8 GB GSkill Ripjaws X 
Hard DriveOptical DriveOSMonitor
WD Caviar Black 1 TB Lite-On Windows 7 Professional 64 bit Samsung T240 
KeyboardPowerCaseMouse
Filco Majestouch 2 Tenkeyless with Blues PC Power and Cooling Silencer 760 Watt Coolermaster HAF X Razer Naga 
  hide details  
Reply
post #4956 of 10702
4.5ghz @ manual vcore 1.25, didn't bother going lower, first run overnight--may try lower settings later.
I ran prime on custom blend for about 13+ hours.
post #4957 of 10702
Thread Starter 
qiqi1021, eThix & controL

Added thumb.gif thank you for taking the time to contribute to the thread and spreadsheet. Welcome to the club :

Choose your sig and wear it proudly, Copy and Paste whichever you want smile.gif smile.gif


CLICKME (Click to show)
[THREAD=968053][post-flame-small.gif] The Sandy STABLE Club [post-flame-small.gif][/THREAD]
[php]
[THREAD=968053][post-flame-small.gif] The Sandy STABLE Club [post-flame-small.gif][/THREAD]
[/php]



[THREAD=968053][post-flame-small.gif] The Sandy SUPER STABLE Club [post-flame-small.gif][/THREAD]
[php]
[THREAD=968053][post-flame-small.gif] The Sandy SUPER STABLE Club [post-flame-small.gif][/THREAD]
[/php]


Thanks again thumb.gif
it looks alive
(17 items)
 
Sandy Transformed
(69 photos)
 
CPUMotherboardGraphicsRAM
i5 2500K [5ghz 1.44v 24/7] Asus Maximus IV Extreme SLI GTX 460 @ 920/1840/4100 [1.11v] 4GB Dominator GT @ 2133mhz CL8 [1.65v] 
Hard DriveHard DriveCoolingOS
Intel X25-M G2 80GB 3x Samsung F3 500GB RAID 0 EK Supreme HF Full Copper Windows 7 Ultimate 64bit 
MonitorPowerCaseAudio
LG42SL9500 42" 1080p [Surround Soon] XFX XXX Edition 650w Xigmatec Elysium JVC HA-RX700 [foam mod] 
  hide details  
Reply
it looks alive
(17 items)
 
Sandy Transformed
(69 photos)
 
CPUMotherboardGraphicsRAM
i5 2500K [5ghz 1.44v 24/7] Asus Maximus IV Extreme SLI GTX 460 @ 920/1840/4100 [1.11v] 4GB Dominator GT @ 2133mhz CL8 [1.65v] 
Hard DriveHard DriveCoolingOS
Intel X25-M G2 80GB 3x Samsung F3 500GB RAID 0 EK Supreme HF Full Copper Windows 7 Ultimate 64bit 
MonitorPowerCaseAudio
LG42SL9500 42" 1080p [Surround Soon] XFX XXX Edition 650w Xigmatec Elysium JVC HA-RX700 [foam mod] 
  hide details  
Reply
post #4958 of 10702
Lately im been playing around with offset for vcore. Using same template as TwoCables biggrin.gif

Passed both 1344 and 1792 runs for 1hr.

Latest settings

Ai Tweaker

Ai Overclock Tuner: Manual
BLCK/PCIE Frequency: 100.0
Turbo Ratio: By All Cores
By All Cores: 48
Internal PLL Voltage: Enabled
Memory Frequency: DDR3-1600MHz
DRAM Timing Control: 9-9-9-24-1T
EPU Power Saving MODE: Disabled



Ai Tweaker\ CPU Power Management >

CPU Ratio: Auto
Enhanced Intel SpeedStep Technology: Enabled
Turbo Mode: Enabled
Long Duration Power Limit: Auto
Long Duration Maintained: Auto
Short Duration Power Limit: Auto
Additional Turbo Voltage: Auto
Primary Plane Current Limit: Auto



Ai Tweaker (in the DIGI+ VRM section)

Load-Line Calibration: Ultra High
VRM Frequency: Manual
VRM Fixed Frequency Mode: 350
Phase Control: Extreme
Duty Control: Extreme
CPU Current Capability: 140%
CPU Voltage: Offset Mode
Offset Mode Sign: +
CPU Offset Voltage: 0.040V
DRAM Voltage: 1.5000V
VCCSA Voltage: Auto
VCCIO Voltage: 1.15625V
CPU PLL Voltage: 1.70000V
PCH Voltage: Auto
CPU Spread Spectrum: Enabled



Advanced\ CPU Configuration >

CPU Ratio: Auto
Intel Adaptive Thermal Monitor: Enabled
Active Processor Cores: All
Limit CPUID Maximum: Disabled
Execute Disable Bit: Enabled
Intel Virtualization Technology: Disabled
Enhanced Intel SpeedStep Technology: Enabled
Turbo Mode: Enabled
CPU C1E: Enabled
CPU C3 Report: Auto
CPU C6 Report: Auto
post #4959 of 10702
Here is my overclock. i5 2500k set to 4.7GHz with 1.31V.

Does anyone know why my voltage seems to jump around a bit? It can go as low as 1.30 sometimes and as high as 1.33, even though my VCore is set to Manual at 1.31V.

I would also like to get some opinions on my OC. Thanks!
post #4960 of 10702
Quote:
Originally Posted by mgrman;15450800 
VCCIO, what's your ram rated at, and what do you have for VCCIO?

VCCIO is on Auto and Ram is set at its advised voltage - 1.5v.


Hey munaim, PLEASE can you help us on this problem? You didn't notice us frown.gif
New Posts  All Forums:Forum Nav:
  Return Home
  Back to Forum: Intel CPUs
  • [Official] The Sandy Stable Club **Guides, Voltages, Temps & BIOS Templates** Inc SPREADSHEET
Overclock.net › Forums › Intel › Intel CPUs › [Official] The Sandy Stable Club **Guides, Voltages, Temps & BIOS Templates** Inc SPREADSHEET