Overclock.net › Forums › Intel › Intel CPUs › [Official] The Sandy Stable Club **Guides, Voltages, Temps & BIOS Templates** Inc SPREADSHEET
New Posts  All Forums:Forum Nav:

[Official] The Sandy Stable Club **Guides, Voltages, Temps & BIOS Templates** Inc SPREADSHEET - Page 541

post #5401 of 10699
Quote:
Originally Posted by Thryack;15623556 
about 2 hours and 20 mins without errors, 1.320v and changed a few things on ram.
going to sleep now, will post results in a few hours.

2hrs not enough:p, this club is mininum 12hrs:D
post #5402 of 10699
I changed up my OC a little bit, I changed to Offset Voltage, instead of Manual Voltage, same speed, similar volts, and higher temps. (I also have my case fully assembled, last time I had no front, or side panels on).

48ghz1448.png

I think I'm going to try lowering my CPU PLL, see if maybe I can OC a little higher with the same vcore.
post #5403 of 10699
Quote:
Originally Posted by McLaren_F1;15624966 
2hrs not enough:p, this club is mininum 12hrs:D

I know, I just left it overnight.
fnh4ht.png
So far so good biggrin.gif, I'll probably get to 12h with these settings.
temps worry me a bit though, is it fine if it gets 75c max?
My Rig
(17 items)
 
  
CPUMotherboardGraphicsRAM
i5 2500k @ 4.8 GHZ 1.33v  ASUS P8P67 PRO 3.0 Sapphire AMD Radeon HD 7950 1000/1575 1.149v 12 GB Kingston DDR3 1600 MHZ 
Hard DriveHard DriveOptical DriveCooling
Kingston 96GB SSD  Caviar Green 1TB storage  Plextor PX-L890 SA 24x DVD-RW Noctua NH-D14 
OSMonitorKeyboardPower
Windows 7 Professional 64 bit IPS Dell Ultrasharp U2412M 24" Logitech G110 Corsair AX1200  
CaseMouseMouse PadAudio
Cooler Master HAF X Razer Deathadder Razer Goliathus Asus Xonar DG 
Audio
JVC HA-RX900  
  hide details  
Reply
My Rig
(17 items)
 
  
CPUMotherboardGraphicsRAM
i5 2500k @ 4.8 GHZ 1.33v  ASUS P8P67 PRO 3.0 Sapphire AMD Radeon HD 7950 1000/1575 1.149v 12 GB Kingston DDR3 1600 MHZ 
Hard DriveHard DriveOptical DriveCooling
Kingston 96GB SSD  Caviar Green 1TB storage  Plextor PX-L890 SA 24x DVD-RW Noctua NH-D14 
OSMonitorKeyboardPower
Windows 7 Professional 64 bit IPS Dell Ultrasharp U2412M 24" Logitech G110 Corsair AX1200  
CaseMouseMouse PadAudio
Cooler Master HAF X Razer Deathadder Razer Goliathus Asus Xonar DG 
Audio
JVC HA-RX900  
  hide details  
Reply
post #5404 of 10699
Yeah, that's fine for a max temp using p95. Chances are you won't reach temps that high during normal PC use, at least I don't typically come close to my prime95 temps. Nice volts on that 4.8ghz, mine needs 1.45v or so to be stable at that speed frown.gif

[edit]
Oh, and you should have used RealTemp 3.67, or higher for entry to the club, not sure if that's still a requirement I guess.
post #5405 of 10699
Quote:
Originally Posted by anubis1127;15629036 
Yeah, that's fine for a max temp using p95. Chances are you won't reach temps that high during normal PC use, at least I don't typically come close to my prime95 temps. Nice volts on that 4.8ghz, mine needs 1.45v or so to be stable at that speed frown.gif

[edit]
Oh, and you should have used RealTemp 3.67, or higher for entry to the club, not sure if that's still a requirement I guess.

You're right frown.gif let's hope they still accept me..
My Rig
(17 items)
 
  
CPUMotherboardGraphicsRAM
i5 2500k @ 4.8 GHZ 1.33v  ASUS P8P67 PRO 3.0 Sapphire AMD Radeon HD 7950 1000/1575 1.149v 12 GB Kingston DDR3 1600 MHZ 
Hard DriveHard DriveOptical DriveCooling
Kingston 96GB SSD  Caviar Green 1TB storage  Plextor PX-L890 SA 24x DVD-RW Noctua NH-D14 
OSMonitorKeyboardPower
Windows 7 Professional 64 bit IPS Dell Ultrasharp U2412M 24" Logitech G110 Corsair AX1200  
CaseMouseMouse PadAudio
Cooler Master HAF X Razer Deathadder Razer Goliathus Asus Xonar DG 
Audio
JVC HA-RX900  
  hide details  
Reply
My Rig
(17 items)
 
  
CPUMotherboardGraphicsRAM
i5 2500k @ 4.8 GHZ 1.33v  ASUS P8P67 PRO 3.0 Sapphire AMD Radeon HD 7950 1000/1575 1.149v 12 GB Kingston DDR3 1600 MHZ 
Hard DriveHard DriveOptical DriveCooling
Kingston 96GB SSD  Caviar Green 1TB storage  Plextor PX-L890 SA 24x DVD-RW Noctua NH-D14 
OSMonitorKeyboardPower
Windows 7 Professional 64 bit IPS Dell Ultrasharp U2412M 24" Logitech G110 Corsair AX1200  
CaseMouseMouse PadAudio
Cooler Master HAF X Razer Deathadder Razer Goliathus Asus Xonar DG 
Audio
JVC HA-RX900  
  hide details  
Reply
post #5406 of 10699
Probs not, they're pretty anal about it. Has to be Realtemp 3.67 with the clock showing 12+ hours, the time in Prime95 isn't enough doh.gif
COST EFFECTIVE
(18 items)
 
  
CPUMotherboardGraphicsRAM
Intel Core i5 2500K @ 4.4GHz 1.24v Asus P8P67 Vanilla ASUS GTX660Ti DirectCU OC @ 1,250MHz/7,000MHz G.Skill Eco 1600Mhz 7-8-7-24 
Hard DriveHard DriveOptical DriveCooling
WD Caviar Blue 1TB (WD10EZEX) Intel 520 120GB LG SuperMulti CoolerMaster Hyper 212+ 
OSMonitorKeyboardPower
Windows 7 Home Premium x64 BenQ E2420HD Filco Majestouch 2 Tenkeyless w/ MX blues Seasonic SS-650HT 
CaseMouseMouse PadAudio
Corsair 500R Logitech G400 Steelseries QCK Asus Xonar DG 
AudioOther
Fiio E17 Alpen Beyerdynamic DT770 + Zalman clip-on mic 
  hide details  
Reply
COST EFFECTIVE
(18 items)
 
  
CPUMotherboardGraphicsRAM
Intel Core i5 2500K @ 4.4GHz 1.24v Asus P8P67 Vanilla ASUS GTX660Ti DirectCU OC @ 1,250MHz/7,000MHz G.Skill Eco 1600Mhz 7-8-7-24 
Hard DriveHard DriveOptical DriveCooling
WD Caviar Blue 1TB (WD10EZEX) Intel 520 120GB LG SuperMulti CoolerMaster Hyper 212+ 
OSMonitorKeyboardPower
Windows 7 Home Premium x64 BenQ E2420HD Filco Majestouch 2 Tenkeyless w/ MX blues Seasonic SS-650HT 
CaseMouseMouse PadAudio
Corsair 500R Logitech G400 Steelseries QCK Asus Xonar DG 
AudioOther
Fiio E17 Alpen Beyerdynamic DT770 + Zalman clip-on mic 
  hide details  
Reply
post #5407 of 10699
Quote:
Originally Posted by Rops84;15622392 
Ok, i tried asking in the MOBO club but no response there...

I have ASrock Extreme4 MOBO and a bit of a problem with OCing.

Well, the lowest i can set my CPU PLL voltage 1.586 V...and my chip needs less to be stable @1.4 Vcore @ 5 Ghz(it can boot @ multi x52 without the CPU PLL overvoltage).
I know this cause i v seen such a pattern while OC this chip and the lower the PLL goes he is more stable and needs less of other voltages.

Than I tried raising Vcore to 1.5V but have not achieved any stability. Second worker fails no matter what i do(NO BSOD just a #2 worker fail in prime95).

So my question is;
Is there any way to mod a BIOS to be able to output less of the CPU PLL voltage? And if it is, where can i find it?

Please help me if u can!!!

If your bios wont go any lower than 1.586v PLL,how on earth do you come to the conclusion you need less.??.smile.gif
CORSAIR WC
(14 items)
 
  
CPUMotherboardGraphicsRAM
HASWELL-E 5960x (3423B529)Costa Rica + 5960X (J...  GIGABYTE X99 SOC Champion/ ASUS RAMPAGE V EXTR... 2X NVIDIA GTX 980 Ti's 16 GIG G-SKILL DDR4 3200/3300/3400 KITS 
Hard DriveOptical DriveCoolingOS
OCZ VERTEX 450 128GB SSD OCZ AGILITY 4 256GB S... LG BD RE-WRITER1 X SAMSUNG 20X KOOLANCE 380I BLOCK 2X XSPC 360 RADS 1X XSPC 12...  WINDOWS 10 X64 BUILD 11099 
MonitorKeyboardPowerCase
2X AOC 28" LED SAITEK ECLIPSE II SUPER FLOWER 1300W GOLD CORSAIR OBSIDIAN 900D 
Mouse
LOGITECH MX1000 LASER 
  hide details  
Reply
CORSAIR WC
(14 items)
 
  
CPUMotherboardGraphicsRAM
HASWELL-E 5960x (3423B529)Costa Rica + 5960X (J...  GIGABYTE X99 SOC Champion/ ASUS RAMPAGE V EXTR... 2X NVIDIA GTX 980 Ti's 16 GIG G-SKILL DDR4 3200/3300/3400 KITS 
Hard DriveOptical DriveCoolingOS
OCZ VERTEX 450 128GB SSD OCZ AGILITY 4 256GB S... LG BD RE-WRITER1 X SAMSUNG 20X KOOLANCE 380I BLOCK 2X XSPC 360 RADS 1X XSPC 12...  WINDOWS 10 X64 BUILD 11099 
MonitorKeyboardPowerCase
2X AOC 28" LED SAITEK ECLIPSE II SUPER FLOWER 1300W GOLD CORSAIR OBSIDIAN 900D 
Mouse
LOGITECH MX1000 LASER 
  hide details  
Reply
post #5408 of 10699
Quote:
Originally Posted by Rops84;15622392 
Ok, i tried asking in the MOBO club but no response there...

I have ASrock Extreme4 MOBO and a bit of a problem with OCing.

Well, the lowest i can set my CPU PLL voltage 1.586 V...and my chip needs less to be stable @1.4 Vcore @ 5 Ghz(it can boot @ multi x52 without the CPU PLL overvoltage).
I know this cause i v seen such a pattern while OC this chip and the lower the PLL goes he is more stable and needs less of other voltages.

Than I tried raising Vcore to 1.5V but have not achieved any stability. Second worker fails no matter what i do(NO BSOD just a #2 worker fail in prime95).

So my question is;
Is there any way to mod a BIOS to be able to output less of the CPU PLL voltage? And if it is, where can i find it?

Please help me if u can!!!

If your bios wont go any lower than 1.586v PLL,how on earth do you come to the conclusion you need less.??.smile.gif

EDIT
Sorry,double post
CORSAIR WC
(14 items)
 
  
CPUMotherboardGraphicsRAM
HASWELL-E 5960x (3423B529)Costa Rica + 5960X (J...  GIGABYTE X99 SOC Champion/ ASUS RAMPAGE V EXTR... 2X NVIDIA GTX 980 Ti's 16 GIG G-SKILL DDR4 3200/3300/3400 KITS 
Hard DriveOptical DriveCoolingOS
OCZ VERTEX 450 128GB SSD OCZ AGILITY 4 256GB S... LG BD RE-WRITER1 X SAMSUNG 20X KOOLANCE 380I BLOCK 2X XSPC 360 RADS 1X XSPC 12...  WINDOWS 10 X64 BUILD 11099 
MonitorKeyboardPowerCase
2X AOC 28" LED SAITEK ECLIPSE II SUPER FLOWER 1300W GOLD CORSAIR OBSIDIAN 900D 
Mouse
LOGITECH MX1000 LASER 
  hide details  
Reply
CORSAIR WC
(14 items)
 
  
CPUMotherboardGraphicsRAM
HASWELL-E 5960x (3423B529)Costa Rica + 5960X (J...  GIGABYTE X99 SOC Champion/ ASUS RAMPAGE V EXTR... 2X NVIDIA GTX 980 Ti's 16 GIG G-SKILL DDR4 3200/3300/3400 KITS 
Hard DriveOptical DriveCoolingOS
OCZ VERTEX 450 128GB SSD OCZ AGILITY 4 256GB S... LG BD RE-WRITER1 X SAMSUNG 20X KOOLANCE 380I BLOCK 2X XSPC 360 RADS 1X XSPC 12...  WINDOWS 10 X64 BUILD 11099 
MonitorKeyboardPowerCase
2X AOC 28" LED SAITEK ECLIPSE II SUPER FLOWER 1300W GOLD CORSAIR OBSIDIAN 900D 
Mouse
LOGITECH MX1000 LASER 
  hide details  
Reply
post #5409 of 10699
Ok I had realtemp running for 5 hours then I clicked show desktop and it disappeared.. frown.gif
256z6eg.png
if that's not enough proof then w/e, I'm happy with the results biggrin.gif
edit: My bad it's 1.33v not 1.32v
My Rig
(17 items)
 
  
CPUMotherboardGraphicsRAM
i5 2500k @ 4.8 GHZ 1.33v  ASUS P8P67 PRO 3.0 Sapphire AMD Radeon HD 7950 1000/1575 1.149v 12 GB Kingston DDR3 1600 MHZ 
Hard DriveHard DriveOptical DriveCooling
Kingston 96GB SSD  Caviar Green 1TB storage  Plextor PX-L890 SA 24x DVD-RW Noctua NH-D14 
OSMonitorKeyboardPower
Windows 7 Professional 64 bit IPS Dell Ultrasharp U2412M 24" Logitech G110 Corsair AX1200  
CaseMouseMouse PadAudio
Cooler Master HAF X Razer Deathadder Razer Goliathus Asus Xonar DG 
Audio
JVC HA-RX900  
  hide details  
Reply
My Rig
(17 items)
 
  
CPUMotherboardGraphicsRAM
i5 2500k @ 4.8 GHZ 1.33v  ASUS P8P67 PRO 3.0 Sapphire AMD Radeon HD 7950 1000/1575 1.149v 12 GB Kingston DDR3 1600 MHZ 
Hard DriveHard DriveOptical DriveCooling
Kingston 96GB SSD  Caviar Green 1TB storage  Plextor PX-L890 SA 24x DVD-RW Noctua NH-D14 
OSMonitorKeyboardPower
Windows 7 Professional 64 bit IPS Dell Ultrasharp U2412M 24" Logitech G110 Corsair AX1200  
CaseMouseMouse PadAudio
Cooler Master HAF X Razer Deathadder Razer Goliathus Asus Xonar DG 
Audio
JVC HA-RX900  
  hide details  
Reply
post #5410 of 10699
Quote:
Originally Posted by moorhen2;15631011 
If your bios wont go any lower than 1.586v PLL,how on earth do you come to the conclusion you need less.??.smile.gif

EDIT
Sorry,double post

Ok, iv been OCing this chip for almost 6 months now and i see some patterns in its behaviour...
And i came to a conclusion that i need less cause i w seen other chips work @ 1.5 PLL.
Also i w noticed that my second core is causing troubles to me and the lower i go on PLL shes more stable with less Vcore, and @ 5 Ghz no matter the Vcore 2 nd worker fails, and by adding PLL it fails sooner...so its easy to conclude i could make it stable with less PLL.
Also i dont need internal pll overvoltage to boot to windows as far as MULTI x52...
Mind this is not the first nor only i5 2500K i OC...
Zeus
(16 items)
 
  
CPUMotherboardGraphicsRAM
i5 2500k 5 Ghz @ 1.488 V 24/7 Asrock p67 extreme 4 B3 Gainward GTX 570 GS GLH @ 850/2100 @ 1.00V 2x4 Gb G:SKILL Sniper @ 1600 9-9-9-24 t1 @ 1.260 V 
Hard DriveOptical DriveCoolingCooling
RAID-2xWD Sata3 Blue 500 Gb + 1xWD Sata3 Green 2TB none RAD: EK XTC 420 CPU Block: EK-Supreme HF - Full Nickel-EN 
CoolingOSMonitorKeyboard
GPU Block: EK Universal EN Win7 Professional 64Bit LG Flatron M2362D 23"[1920x1080] Steelseries 6GV2 
PowerCaseMouseMouse Pad
XFX PRO 550W CoolerMaster CM690 II Nvidia Edition Razer DeathAdder 3500Dpi Left hand edition Razer Goliathus Speed 
  hide details  
Reply
Zeus
(16 items)
 
  
CPUMotherboardGraphicsRAM
i5 2500k 5 Ghz @ 1.488 V 24/7 Asrock p67 extreme 4 B3 Gainward GTX 570 GS GLH @ 850/2100 @ 1.00V 2x4 Gb G:SKILL Sniper @ 1600 9-9-9-24 t1 @ 1.260 V 
Hard DriveOptical DriveCoolingCooling
RAID-2xWD Sata3 Blue 500 Gb + 1xWD Sata3 Green 2TB none RAD: EK XTC 420 CPU Block: EK-Supreme HF - Full Nickel-EN 
CoolingOSMonitorKeyboard
GPU Block: EK Universal EN Win7 Professional 64Bit LG Flatron M2362D 23"[1920x1080] Steelseries 6GV2 
PowerCaseMouseMouse Pad
XFX PRO 550W CoolerMaster CM690 II Nvidia Edition Razer DeathAdder 3500Dpi Left hand edition Razer Goliathus Speed 
  hide details  
Reply
New Posts  All Forums:Forum Nav:
  Return Home
  Back to Forum: Intel CPUs
  • [Official] The Sandy Stable Club **Guides, Voltages, Temps & BIOS Templates** Inc SPREADSHEET
Overclock.net › Forums › Intel › Intel CPUs › [Official] The Sandy Stable Club **Guides, Voltages, Temps & BIOS Templates** Inc SPREADSHEET