Overclock.net › Forums › Intel › Intel CPUs › [Official] The Sandy Stable Club **Guides, Voltages, Temps & BIOS Templates** Inc SPREADSHEET
New Posts  All Forums:Forum Nav:

[Official] The Sandy Stable Club **Guides, Voltages, Temps & BIOS Templates** Inc SPREADSHEET - Page 586

post #5851 of 10335
12/4/11 at 9:15pm
Quote:
Originally Posted by Hambone07si View Post

Lord Xeb, what's your load voltage? I see only idle voltage.

I think that is the load voltage (Prime95 is running), but he's using an older version of RealTemp, and it's not recording the load right (it's showing the multiplier as 0).
My System
(13 items)
  		  
CPUMotherboardRAMHard Drive
i5 2500k @ 4.9 GHz 1.376v 24/7 ASUS P8P67 Pro 8 GB G.Skill ECO Series @ 1866 8-9-8-24 2T 1.5 V Samsung 830 256GB SSD 
CoolingOSMonitorPower
Sunbeam Core Contact Freezer Windows 7 SP1 Ultimate x64 ASUS 24" LCD Antec TruePower TP-750 750W PSU 
View all
  hide details  
Reply
My System
(13 items)
  		  
CPUMotherboardRAMHard Drive
i5 2500k @ 4.9 GHz 1.376v 24/7 ASUS P8P67 Pro 8 GB G.Skill ECO Series @ 1866 8-9-8-24 2T 1.5 V Samsung 830 256GB SSD 
CoolingOSMonitorPower
Sunbeam Core Contact Freezer Windows 7 SP1 Ultimate x64 ASUS 24" LCD Antec TruePower TP-750 750W PSU 
View all
  hide details  
Reply

Gear mentioned in this thread:

post #5852 of 10335
12/4/11 at 9:23pm
Quote:
Originally Posted by Lord Xeb View Post

Magic
Memory Frequency: 1600MHz
DRAM Timing Control: 8-9-8-24

DRAM Voltage: 1.65
VCCIO Voltage: 1.15

btw.. I noticed that you set VCCIO at 0.5v lower than your ram voltage. Did you actually need 1.15v for vccio @ 1600mhz, or did you set it that way to keep it to within 0.5v from your ram voltage?

The reason I ask is that used to be a requirement with older architectures, but it's not supposed to be necessary anymore with sandy bridge. Just curious if that actually affected your stability, since your ram isn't clocked too high.
My System
(13 items)
  		  
CPUMotherboardRAMHard Drive
i5 2500k @ 4.9 GHz 1.376v 24/7 ASUS P8P67 Pro 8 GB G.Skill ECO Series @ 1866 8-9-8-24 2T 1.5 V Samsung 830 256GB SSD 
CoolingOSMonitorPower
Sunbeam Core Contact Freezer Windows 7 SP1 Ultimate x64 ASUS 24" LCD Antec TruePower TP-750 750W PSU 
View all
  hide details  
Reply
My System
(13 items)
  		  
CPUMotherboardRAMHard Drive
i5 2500k @ 4.9 GHz 1.376v 24/7 ASUS P8P67 Pro 8 GB G.Skill ECO Series @ 1866 8-9-8-24 2T 1.5 V Samsung 830 256GB SSD 
CoolingOSMonitorPower
Sunbeam Core Contact Freezer Windows 7 SP1 Ultimate x64 ASUS 24" LCD Antec TruePower TP-750 750W PSU 
View all
  hide details  
Reply
post #5853 of 10335
12/4/11 at 9:27pm
  • Joined: Nov 2009
  • Location: Cleveland, OH
  • Posts: 3,023
  • Rep: 213 (Unique: 138)
  • Trader Rating: 4
  • Folding Team Rank: 1,184
  •  
    Name Team Rank Points / May Work Units / May
    Hambone07si 1,184 1,398,762 / 0 799 / 0
     
  • Select All Posts By This User
I have mine set to 1.150v on my system for using 4 x 2gig dominators gt's @ 1866mhz. 1.125v wound pass 2hrs of prime but 1.150v passed 15hrs. That doesn't really apply to SB
Tech Bench
(15 items)
  		  
CPUCPUMotherboardGraphics
Work 3930k@4.8ghz1.375v Home 2700k 5ghz 1.425v / Max boot 56x 1.575v / ... Maximus 4 Extreme-Z Home / X79 Sabertooth Work Diamond 7970 1200/1600 1.174v 42c Load EK Aceta... 
GraphicsRAMHard DriveOptical Drive
VisionTek 7970 1200/1600 1.174v  Dominator GT 8gb @1866mhz 8-8-8-20-1t / 12gigs ... 2 x Vertex 3 120gig Raid 0.. 1gb/s of goodness  22x DVDrw 
OSMonitorKeyboardPower
Windows 7 64 ult / Window 7 64 pro Dell 30" U3011 1600p / Samsung 55" Led 6500 G15 Corsair AX1200 / Corsair TX650 
CaseMouse
Custom Tech Bench / Corsair 400R  Rat 7 / Logitech and Space Pilot Pro 
View all
  hide details  
Reply
Tech Bench
(15 items)
  		  
CPUCPUMotherboardGraphics
Work 3930k@4.8ghz1.375v Home 2700k 5ghz 1.425v / Max boot 56x 1.575v / ... Maximus 4 Extreme-Z Home / X79 Sabertooth Work Diamond 7970 1200/1600 1.174v 42c Load EK Aceta... 
GraphicsRAMHard DriveOptical Drive
VisionTek 7970 1200/1600 1.174v  Dominator GT 8gb @1866mhz 8-8-8-20-1t / 12gigs ... 2 x Vertex 3 120gig Raid 0.. 1gb/s of goodness  22x DVDrw 
OSMonitorKeyboardPower
Windows 7 64 ult / Window 7 64 pro Dell 30" U3011 1600p / Samsung 55" Led 6500 G15 Corsair AX1200 / Corsair TX650 
CaseMouse
Custom Tech Bench / Corsair 400R  Rat 7 / Logitech and Space Pilot Pro 
View all
  hide details  
Reply
post #5854 of 10335
12/4/11 at 11:17pm
STABLE 5ghz run! Prime95 13 hours

I would like to join =] 13+ hours prime95 blend
This was a jump from 1.35v so i'm still going to be testing a little bit for better stats.
Edited by mend0k - 12/4/11 at 11:28pm
SammiesKathy
(14 items)
  		  
CPUMotherboardGraphicsRAM
5.1ghz 24/7 @ 1.416v stable 93%memory usage c... Asus p8z68-V eVGA 670 SC+ 4gb 8gb DDR3 1600 Corsair Vengeance 1600mhz 
Hard DriveHard DriveCoolingOS
Western Digital Caviar Green 1TB Crucial M4 128 GB ssd Hyper 212 Evo Win7 
MonitorKeyboardPowerCase
HP 2335 Razer Lycosa Corsair TX750W  Antec 1200 
MouseAudio
Logitech MX 518 Logitech x540 sound system 
View all
  hide details  
Reply
SammiesKathy
(14 items)
  		  
CPUMotherboardGraphicsRAM
5.1ghz 24/7 @ 1.416v stable 93%memory usage c... Asus p8z68-V eVGA 670 SC+ 4gb 8gb DDR3 1600 Corsair Vengeance 1600mhz 
Hard DriveHard DriveCoolingOS
Western Digital Caviar Green 1TB Crucial M4 128 GB ssd Hyper 212 Evo Win7 
MonitorKeyboardPowerCase
HP 2335 Razer Lycosa Corsair TX750W  Antec 1200 
MouseAudio
Logitech MX 518 Logitech x540 sound system 
View all
  hide details  
Reply
post #5855 of 10335
12/4/11 at 11:34pm
Quote:
Originally Posted by Hambone07si View Post

I have mine set to 1.150v on my system for using 4 x 2gig dominators gt's @ 1866mhz. 1.125v wound pass 2hrs of prime but 1.150v passed 15hrs. That doesn't really apply to SB

Is your ram voltage at 1.65v?
My System
(13 items)
  		  
CPUMotherboardRAMHard Drive
i5 2500k @ 4.9 GHz 1.376v 24/7 ASUS P8P67 Pro 8 GB G.Skill ECO Series @ 1866 8-9-8-24 2T 1.5 V Samsung 830 256GB SSD 
CoolingOSMonitorPower
Sunbeam Core Contact Freezer Windows 7 SP1 Ultimate x64 ASUS 24" LCD Antec TruePower TP-750 750W PSU 
View all
  hide details  
Reply
My System
(13 items)
  		  
CPUMotherboardRAMHard Drive
i5 2500k @ 4.9 GHz 1.376v 24/7 ASUS P8P67 Pro 8 GB G.Skill ECO Series @ 1866 8-9-8-24 2T 1.5 V Samsung 830 256GB SSD 
CoolingOSMonitorPower
Sunbeam Core Contact Freezer Windows 7 SP1 Ultimate x64 ASUS 24" LCD Antec TruePower TP-750 750W PSU 
View all
  hide details  
Reply
post #5856 of 10335
12/5/11 at 6:20am
Hi all!

New to s1155 and I really need your advice!!! I've been trying to find stable settings for my setup but nothing works...
Anything above 4.7GHz will not function properly. Setting the VCore till 1.48V, and leaving everything else at AUTO, will have no effect. I've even set LLC till Level10, QPI/VTT till 1.25V and System Agent till 1.25V...
Unfortunately, every time I'll try to run IntelBurnTest, I'll get BSOD after a few secs.

The CPU (i5 2500k) was on Gigabyte Z68 UD4 for the past few months, running at 4.9GHz with 1.46V.
And now that i bought it, I can't even reach 4.8GHz on a UD7 board!
My System
(15 items)
  		  
CPUMotherboardGraphicsRAM
Intel Core i7 3770k Gigabyte GA-Z68X-UD7 Palit GT440 4x4GB Corsair Vengeancer 1600MHz 
Hard DriveCoolingOSMonitor
Intel X-25M/4xWD 500G RE3 Corsair H50 Windows 7 Pro 64bit Dell 2405FWP 
PowerCase
Enermax Revo 850W 87+ CM Stacker STC-T01 
View all
  hide details  
Reply
My System
(15 items)
  		  
CPUMotherboardGraphicsRAM
Intel Core i7 3770k Gigabyte GA-Z68X-UD7 Palit GT440 4x4GB Corsair Vengeancer 1600MHz 
Hard DriveCoolingOSMonitor
Intel X-25M/4xWD 500G RE3 Corsair H50 Windows 7 Pro 64bit Dell 2405FWP 
PowerCase
Enermax Revo 850W 87+ CM Stacker STC-T01 
View all
  hide details  
Reply
post #5857 of 10335
12/5/11 at 7:00am
Quote:
Originally Posted by favas View Post

Hi all!
New to s1155 and I really need your advice!!! I've been trying to find stable settings for my setup but nothing works...
Anything above 4.7GHz will not function properly. Setting the VCore till 1.48V, and leaving everything else at AUTO, will have no effect. I've even set LLC till Level10, QPI/VTT till 1.25V and System Agent till 1.25V...
Unfortunately, every time I'll try to run IntelBurnTest, I'll get BSOD after a few secs.
The CPU (i5 2500k) was on Gigabyte Z68 UD4 for the past few months, running at 4.9GHz with 1.46V.
And now that i bought it, I can't even reach 4.8GHz on a UD7 board!

can i assume you tried lower LLC levels as well as higher?
Black Box
(18 items)
  		  
CPUMotherboardGraphicsRAM
Intel Core i7 3770K Asrock Z77 OC Formula MSI Geforce GTX 670 Power Edition OC G.Skill Ripjaws X 2133mhz 2x8GB CL9 
Hard DriveHard DriveHard DriveOptical Drive
Adata S510 SSD SATA III 120GB OCZ Vertex 3 SSD SATA III 60GB Samsung HD103SJ SATA II 1TB TSSTcorp CDDVDWSH-S223C 
CoolingOSMonitorKeyboard
XSPC Raystorm Block Microsoft Windows 7 Professional x64 Samsung SyncMaster 931BW DELL ABNT2 
PowerCaseMouseOther
Corsair Professional AX850 Corsair Obsidian 800D Microsoft Wireless Optical Mouse 2000 XSPC RX360 Radiator 
OtherOther
XSPC D5 Dual Bay Combo Zalman ZM-MFC1 Plus 
View all
  hide details  
Reply
Black Box
(18 items)
  		  
CPUMotherboardGraphicsRAM
Intel Core i7 3770K Asrock Z77 OC Formula MSI Geforce GTX 670 Power Edition OC G.Skill Ripjaws X 2133mhz 2x8GB CL9 
Hard DriveHard DriveHard DriveOptical Drive
Adata S510 SSD SATA III 120GB OCZ Vertex 3 SSD SATA III 60GB Samsung HD103SJ SATA II 1TB TSSTcorp CDDVDWSH-S223C 
CoolingOSMonitorKeyboard
XSPC Raystorm Block Microsoft Windows 7 Professional x64 Samsung SyncMaster 931BW DELL ABNT2 
PowerCaseMouseOther
Corsair Professional AX850 Corsair Obsidian 800D Microsoft Wireless Optical Mouse 2000 XSPC RX360 Radiator 
OtherOther
XSPC D5 Dual Bay Combo Zalman ZM-MFC1 Plus 
View all
  hide details  
Reply
post #5858 of 10335
12/5/11 at 8:08am
Quote:
Originally Posted by rafael.agp View Post

can i assume you tried lower LLC levels as well as higher?
Hi rafael.agp! I've tried with LLC disabled, and with LLC from 3 to 10...
My System
(15 items)
  		  
CPUMotherboardGraphicsRAM
Intel Core i7 3770k Gigabyte GA-Z68X-UD7 Palit GT440 4x4GB Corsair Vengeancer 1600MHz 
Hard DriveCoolingOSMonitor
Intel X-25M/4xWD 500G RE3 Corsair H50 Windows 7 Pro 64bit Dell 2405FWP 
PowerCase
Enermax Revo 850W 87+ CM Stacker STC-T01 
View all
  hide details  
Reply
My System
(15 items)
  		  
CPUMotherboardGraphicsRAM
Intel Core i7 3770k Gigabyte GA-Z68X-UD7 Palit GT440 4x4GB Corsair Vengeancer 1600MHz 
Hard DriveCoolingOSMonitor
Intel X-25M/4xWD 500G RE3 Corsair H50 Windows 7 Pro 64bit Dell 2405FWP 
PowerCase
Enermax Revo 850W 87+ CM Stacker STC-T01 
View all
  hide details  
Reply
post #5859 of 10335
12/5/11 at 8:09am
Thread Starter 
Quote:
Originally Posted by favas View Post

Hi all!

New to s1155 and I really need your advice!!! I've been trying to find stable settings for my setup but nothing works...
Anything above 4.7GHz will not function properly. Setting the VCore till 1.48V, and leaving everything else at AUTO, will have no effect. I've even set LLC till Level10, QPI/VTT till 1.25V and System Agent till 1.25V...
Unfortunately, every time I'll try to run IntelBurnTest, I'll get BSOD after a few secs.

The CPU (i5 2500k) was on Gigabyte Z68 UD4 for the past few months, running at 4.9GHz with 1.46V.
And now that i bought it, I can't even reach 4.8GHz on a UD7 board!

read the guide in my sig and also there are a few guides posted in the OP, I would recommend reading sin's guide.
it looks alive
(17 items)
 
Antec HTCP
(9 items)
 
Sandy Transformed
(69 photos)
CPUMotherboardGraphicsRAM
i5 2500K [5ghz 1.44v 24/7] Asus Maximus IV Extreme SLI GTX 460 @ 920/1840/4100 [1.11v] 4GB Dominator GT @ 2133mhz CL8 [1.65v] 
Hard DriveHard DriveCoolingOS
Intel X25-M G2 80GB 3x Samsung F3 500GB RAID 0 EK Supreme HF Full Copper Windows 7 Ultimate 64bit 
MonitorPowerCaseAudio
LG42SL9500 42" 1080p [Surround Soon] XFX XXX Edition 650w Xigmatec Elysium JVC HA-RX700 [foam mod] 
View all
CPUMotherboardRAMHard Drive
AMD Phenom II X2 550 BE ASUS M4A785TD-M EVO Kingston HyperX 4GB 1333mhz 160GB 7200RPM Hard drive 
Optical DriveCoolingOSPower
DVD ReWriter Scythe Shiruken  Windows 7 x64 Antec Earthwatts 380w 
Case
Antec NSK2480 (Silver) 
View all
  hide details  
Reply
it looks alive
(17 items)
 
Antec HTCP
(9 items)
 
Sandy Transformed
(69 photos)
CPUMotherboardGraphicsRAM
i5 2500K [5ghz 1.44v 24/7] Asus Maximus IV Extreme SLI GTX 460 @ 920/1840/4100 [1.11v] 4GB Dominator GT @ 2133mhz CL8 [1.65v] 
Hard DriveHard DriveCoolingOS
Intel X25-M G2 80GB 3x Samsung F3 500GB RAID 0 EK Supreme HF Full Copper Windows 7 Ultimate 64bit 
MonitorPowerCaseAudio
LG42SL9500 42" 1080p [Surround Soon] XFX XXX Edition 650w Xigmatec Elysium JVC HA-RX700 [foam mod] 
View all
CPUMotherboardRAMHard Drive
AMD Phenom II X2 550 BE ASUS M4A785TD-M EVO Kingston HyperX 4GB 1333mhz 160GB 7200RPM Hard drive 
Optical DriveCoolingOSPower
DVD ReWriter Scythe Shiruken  Windows 7 x64 Antec Earthwatts 380w 
Case
Antec NSK2480 (Silver) 
View all
  hide details  
Reply
post #5860 of 10335
12/5/11 at 8:36am
Hey im trying for a stable 5ghz oc on my 2500k and have just started a 1366 fft test in prime 95 should i continue at these settings or run a blend test ??
378

cheers
Ryan.
overload
(13 items)
  		  
CPUMotherboardGraphicsRAM
2500k GA-Z68X-UD7-B3 evga gtx 580 3gb in sli ripjaw x 2133 
Hard DriveOSMonitorKeyboard
120gb agility 3 / 2x 1tb caviar black in Raid 0 windows 7 dell u3011 G510 
PowerCaseMouse
Corsair AX1200 cosmos S G5 
View all
  hide details  
Reply
overload
(13 items)
  		  
CPUMotherboardGraphicsRAM
2500k GA-Z68X-UD7-B3 evga gtx 580 3gb in sli ripjaw x 2133 
Hard DriveOSMonitorKeyboard
120gb agility 3 / 2x 1tb caviar black in Raid 0 windows 7 dell u3011 G510 
PowerCaseMouse
Corsair AX1200 cosmos S G5 
View all
  hide details  
Reply
New Posts  All Forums:Forum Nav:
  Return Home
  Back to Forum: Intel CPUs
  • [Official] The Sandy Stable Club **Guides, Voltages, Temps & BIOS Templates** Inc SPREADSHEET

Gear mentioned in this thread:

Overclock.net › Forums › Intel › Intel CPUs › [Official] The Sandy Stable Club **Guides, Voltages, Temps & BIOS Templates** Inc SPREADSHEET