Overclock.net › Forums › Intel › Intel CPUs › [Official] The Sandy Stable Club **Guides, Voltages, Temps & BIOS Templates** Inc SPREADSHEET
New Posts  All Forums:Forum Nav:

[Official] The Sandy Stable Club **Guides, Voltages, Temps & BIOS Templates** Inc SPREADSHEET - Page 608

post #6071 of 10701
357

Appears I may have the wrong memory screen up. I can get another if necessary. 16GB RAM, 4 sticks, 800Mhz 9/9/9/24/2T.
New Computer
(7 items)
 
  
CPUMotherboardGraphicsRAM
2700k 3.5Ghz stock, clocked at 5Ghz ASRock Z68 Professional7 Gen3 XFX HD-687A-ZDFC Radeon HD 6870 (DOA -- RMA) 2xG.SKILL Ripjaws X Series 8GB (2 x 4GB) DDR3 1600 
Hard DriveHard DriveCooling
OCZ Vertex 3 – MAX IOPS Edition VTX3MI-25SAT3-240G 2xSeagate Barracuda ST2000DM001 2TB 7200 RPM Corsair H100 
  hide details  
Reply
New Computer
(7 items)
 
  
CPUMotherboardGraphicsRAM
2700k 3.5Ghz stock, clocked at 5Ghz ASRock Z68 Professional7 Gen3 XFX HD-687A-ZDFC Radeon HD 6870 (DOA -- RMA) 2xG.SKILL Ripjaws X Series 8GB (2 x 4GB) DDR3 1600 
Hard DriveHard DriveCooling
OCZ Vertex 3 – MAX IOPS Edition VTX3MI-25SAT3-240G 2xSeagate Barracuda ST2000DM001 2TB 7200 RPM Corsair H100 
  hide details  
Reply
post #6072 of 10701
Quote:
Originally Posted by munaim1 View Post

You're most welcome, Like mentioned already, make sure you change one settings at a time and in small increments, usually VCCIO from stock would be a good place to start and PLL from 1.5v as well. When switching between stability tester's you'll like find inconsistency, you might find that you're stable in prime but fail in IBT and vice versa, however prime blend is a superior tester as it involves the IMC as well when used with 90% of your available RAM smile.gif

I went with 1.425v, 1.1 VCCIO, 1.7v PLL to start with, made all of the other changes you suggested.

I just ran through IBT MAX 5 runs smile.gif I know I know... use Prime. I will, I just like to spot check with IBT... I want it to pass both tests. Gflops in the 127.2ish range, not sure if that is good or bad.
Edited by uniwarking - 12/10/11 at 12:29pm
post #6073 of 10701
Well guys I think I finally found the sweet spot for my cpu to be @ 5.1ghz and ram to be at an "overclocked" 1600mhz., after many hours of tweaking and prime95 tests on it (and stress testing my patience hehe..). I had to increase my vcore to 1.416v a .016v increase from having 1333mhz ram =[ but this is with 90% of ram being used also.

I am about to pass a FULL (emphasis on full because before it would either bsod me with codes, 101/124 or just plain out fail all before 10min) 30min test of 4096k min and max FFT with 90% of ram @ 1 min per run, afterwards I will do an 8k 15min test and 1079k 15min test and if it passes I will do a custom test to see for full stability.

Any thoughts before I proceed? Like anything else I may need to do to make myself and others feel more confident on stability?

Thanks all!
Burnt Bacon
(21 items)
 
  
CPUMotherboardGraphicsRAM
4930k Asus Rampage IV Extreme eVGA gtx 760 16GB DDR3 G. Skill Trident X CL9@2400 
Hard DriveHard DriveCoolingCooling
Western Digital Caviar Green 1TB Samsung 840 EVO 250GB Swiftech Apogee XL HW Labs GTX 420 
CoolingCoolingCoolingCooling
HW Labs SR-1 420 HW Labs SR-1 420 Phobya Extreme 1080 MCP35x 
CoolingOSMonitorKeyboard
FrozenQ Liquid Fusion Res. 400mL Win7 Ultimate 27" Achieva Shimian Razer Blackwidow 
PowerCaseMouseAudio
evga 1300 G2 HAF Stacker Razer Naga Hex Logitech x540 sound system 
Audio
Sound Blaster Z 
  hide details  
Reply
Burnt Bacon
(21 items)
 
  
CPUMotherboardGraphicsRAM
4930k Asus Rampage IV Extreme eVGA gtx 760 16GB DDR3 G. Skill Trident X CL9@2400 
Hard DriveHard DriveCoolingCooling
Western Digital Caviar Green 1TB Samsung 840 EVO 250GB Swiftech Apogee XL HW Labs GTX 420 
CoolingCoolingCoolingCooling
HW Labs SR-1 420 HW Labs SR-1 420 Phobya Extreme 1080 MCP35x 
CoolingOSMonitorKeyboard
FrozenQ Liquid Fusion Res. 400mL Win7 Ultimate 27" Achieva Shimian Razer Blackwidow 
PowerCaseMouseAudio
evga 1300 G2 HAF Stacker Razer Naga Hex Logitech x540 sound system 
Audio
Sound Blaster Z 
  hide details  
Reply
post #6074 of 10701
OK, so i thought about sharing my overclock with you guys. This overclock has been tested for 9 hours on prime blend test, passed custom tests 1344k, 1792k, 4096k with 90% - 92% of ram used for both 15 and 30 mins each and finally passed linx 20 runs to see my max temp which was 69C. My vcore is 1.376v-1.368v on idle and 1.360v-1.368v on load (i know that you thinking its too much but thats the vcore that makes my crappy chip stable while testing from lower to higher values smile.gif ).

So here are my settings in bios:

450

450

450

450

thanks for all the info you gave me from this very well informed post biggrin.gif Keep up the good job!
Edited by dos659 - 12/10/11 at 2:29pm
post #6075 of 10701
Can I join? do i need anything other than this screenie?

375
     
CPUMotherboardGraphicsRAM
i7-2600k @ 4.7Ghz @ 1.376V Asus P8Z68-V Pro Sapphire HD6970 Patriot Viper II Sector 5 16Gb@1600 
Hard DriveOptical DriveCoolingOS
Hitachi Deskstar 2TB 7400rpm 64 mb SATAIII LG Blu-Ray Burner 12X Corsair H100 Windows 7 Professional 64-bit 
MonitorMonitorMonitorKeyboard
Samsung T240HD Samsung Syncmaster 2233 Samsung T240HD Lenovo Generic 
PowerCaseMouseMouse Pad
Thermaltake TR2 RX 850W CoolerMaster HAF 932 Advanced Sensei Raw Walmart Pad 
AudioAudioAudioAudio
Logitech Z-2300 Audio-Technica Pro700MKII Shure SRH240 Bose AE2 
OtherOtherOther
WD Elements 1.5TB Nexus 7 Blue Yeti 
CPUGraphicsRAMHard Drive
i7 3610qm GTX 670M 16 GB @ 1600 500GB x 2 in Raid 0 
Optical DriveCoolingOSMonitor
MSI IC Diamond 7 Home Premium 15.6 1080p Matte 
KeyboardPowerCaseAudio
MSI with Steelseries 180W AC Adapter MSI 16F3/GT60 Dynaudio Built-in 
CPUMotherboardGraphicsRAM
Intel Q8200 Gateway SN nVidia GT220 8GB DDR3 1333 
Hard DriveOptical DriveCoolingOS
Hitachi 640GB H-L DVD Burner Stock Windows 7 HP 64-bit 
MonitorKeyboardPowerCase
Samsung 46" LCD Logitech Wireless w/ mouse 500W Thermaltake Antec Two Hundred v2 
MouseAudio
Logitech Samsung 1000W 5.1 AVR 
  hide details  
Reply
     
CPUMotherboardGraphicsRAM
i7-2600k @ 4.7Ghz @ 1.376V Asus P8Z68-V Pro Sapphire HD6970 Patriot Viper II Sector 5 16Gb@1600 
Hard DriveOptical DriveCoolingOS
Hitachi Deskstar 2TB 7400rpm 64 mb SATAIII LG Blu-Ray Burner 12X Corsair H100 Windows 7 Professional 64-bit 
MonitorMonitorMonitorKeyboard
Samsung T240HD Samsung Syncmaster 2233 Samsung T240HD Lenovo Generic 
PowerCaseMouseMouse Pad
Thermaltake TR2 RX 850W CoolerMaster HAF 932 Advanced Sensei Raw Walmart Pad 
AudioAudioAudioAudio
Logitech Z-2300 Audio-Technica Pro700MKII Shure SRH240 Bose AE2 
OtherOtherOther
WD Elements 1.5TB Nexus 7 Blue Yeti 
CPUGraphicsRAMHard Drive
i7 3610qm GTX 670M 16 GB @ 1600 500GB x 2 in Raid 0 
Optical DriveCoolingOSMonitor
MSI IC Diamond 7 Home Premium 15.6 1080p Matte 
KeyboardPowerCaseAudio
MSI with Steelseries 180W AC Adapter MSI 16F3/GT60 Dynaudio Built-in 
CPUMotherboardGraphicsRAM
Intel Q8200 Gateway SN nVidia GT220 8GB DDR3 1333 
Hard DriveOptical DriveCoolingOS
Hitachi 640GB H-L DVD Burner Stock Windows 7 HP 64-bit 
MonitorKeyboardPowerCase
Samsung 46" LCD Logitech Wireless w/ mouse 500W Thermaltake Antec Two Hundred v2 
MouseAudio
Logitech Samsung 1000W 5.1 AVR 
  hide details  
Reply
post #6076 of 10701
Quote:
Originally Posted by uniwarking View Post

I went with 1.425v, 1.1 VCCIO, 1.7v PLL to start with, made all of the other changes you suggested.
I just ran through IBT MAX 5 runs smile.gif I know I know... use Prime. I will, I just like to spot check with IBT... I want it to pass both tests. Gflops in the 127.2ish range, not sure if that is good or bad.

Okay, so if I run Prime 1792 1 min runs for 15 minutes + it takes 1.45v to pass! 1.425v seems to be enough in games and even Intel Burn Test "Max"

Should I leave it at 1.45 and move on with life or is there something else I need to do?
post #6077 of 10701
Quote:
Originally Posted by uniwarking View Post

Okay, so if I run Prime 1792 1 min runs for 15 minutes + it takes 1.45v to pass! 1.425v seems to be enough in games and even Intel Burn Test "Max"
Should I leave it at 1.45 and move on with life or is there something else I need to do?

I like 4096k tests....seem to find errors better than 1792.... my personal opinion..

Yea, run a custom test and set the "time to run each FFT: 1"

Run it for more like 45-1hr.... I noticed errors in 4096k that I wouldn't get in 1792k at around the 50min mark....
post #6078 of 10701
Quote:
Originally Posted by munaim1 View Post

Thanks bud, appreciate the screenshot, will update the spreadsheet now. Thanks again, welcome to the club thumb.gif
By the way, very very nice overclock!!!!!

Haha, I bet I can get the voltage lower, I'm just too lazy to continue the repetitive nature of OCing this.
Monkey_Butt
(15 items)
 
   
CPUMotherboardGraphicsRAM
Intel i7-2700k ASRock Z77E-ITX EVGA GTX 670 FTW Samsung 8GB DDR3 1600 Low Voltage 
Hard DriveHard DriveOptical DriveCooling
Plextor M3 128GB Western Digital Caviar Black  Asus 24X Corsair H100 
OSMonitorKeyboardPower
Windows 8 Pro 64-Bit Yamakasi Catleap 27" IPS Razer Black Widow Seasonic X650 
CaseMouseMouse Pad
BitFenix Prodigy White SteelSeries Sensei Raw (Rubber) Artisan Hein  
CPUMotherboardGraphicsGraphics
i5-2500K Oc'd 5.0Ghz @1.416v Asus P8P67 Pro B3 Rev. 3.1 MSI GTX 560 Ti Twin Frozr II MSI GTX 560 Ti TFII  
RAMHard DriveHard DriveHard Drive
G. Skill RipJaws X F3-12800CL8D-8GBXM OCZ Agility 3 60gb Western Digital Caviar Blue 500GB 6.0gb/s Western Digital Caviar Blue 500GB 6.0gb/s 
Hard DriveOptical DriveCoolingOS
Hitachi 500GB 3.0gb/s Lite-On 24x Thermalright Silver Arrow Windows 7 Professional 64-bit 
MonitorMonitorKeyboardPower
Samsung EX2220X Acer 23" LED Razer Blackwidow Seasonic X750 
CaseMouseMouse PadAudio
NZXT Phantom White with Red trim Logitech G400 HIEN SOFT M Japan black | SAMURAI Logitech Z506 
  hide details  
Reply
Monkey_Butt
(15 items)
 
   
CPUMotherboardGraphicsRAM
Intel i7-2700k ASRock Z77E-ITX EVGA GTX 670 FTW Samsung 8GB DDR3 1600 Low Voltage 
Hard DriveHard DriveOptical DriveCooling
Plextor M3 128GB Western Digital Caviar Black  Asus 24X Corsair H100 
OSMonitorKeyboardPower
Windows 8 Pro 64-Bit Yamakasi Catleap 27" IPS Razer Black Widow Seasonic X650 
CaseMouseMouse Pad
BitFenix Prodigy White SteelSeries Sensei Raw (Rubber) Artisan Hein  
CPUMotherboardGraphicsGraphics
i5-2500K Oc'd 5.0Ghz @1.416v Asus P8P67 Pro B3 Rev. 3.1 MSI GTX 560 Ti Twin Frozr II MSI GTX 560 Ti TFII  
RAMHard DriveHard DriveHard Drive
G. Skill RipJaws X F3-12800CL8D-8GBXM OCZ Agility 3 60gb Western Digital Caviar Blue 500GB 6.0gb/s Western Digital Caviar Blue 500GB 6.0gb/s 
Hard DriveOptical DriveCoolingOS
Hitachi 500GB 3.0gb/s Lite-On 24x Thermalright Silver Arrow Windows 7 Professional 64-bit 
MonitorMonitorKeyboardPower
Samsung EX2220X Acer 23" LED Razer Blackwidow Seasonic X750 
CaseMouseMouse PadAudio
NZXT Phantom White with Red trim Logitech G400 HIEN SOFT M Japan black | SAMURAI Logitech Z506 
  hide details  
Reply
post #6079 of 10701
So it's been a while and i'm seem to have gotten stability on my rig. running at 4.5ghz and 1.3v
Not had time to try the 12 hour test, yet, but I will soon.

Just wanting to know if anyone ever got a motherboard high temperature error from Asus Suite II. I was playing Skyrim and checking my temps.
GPU was at 68 C
CPU was at 51 C
But, Asus Suite gave me a warning saying my motherboard was 135 C. I don't know if this is a faulty sensor or if i need to get more cooling for the mobo.
Appreciate if anyone has had any experience with this and could let me know.
J
(15 items)
 
  
CPUMotherboardGraphicsRAM
2600k @ 4.3 Ghz P8P67  XFX 6950 w/ unlocked Shaders Patriot G2  
Hard DriveHard DriveHard DriveOptical Drive
Caviar Black Patriot Pyro SSD (sata 3)  Kingston SSDnow (sata 2) Sony DVD-RW 
CoolingMonitorKeyboardPower
Noctua NH-D14 BENQ 23" Logitech G110 Corsair TX750W 
CaseMouseMouse Pad
Corsair 500R Sidewinder X8 Saitek Cyborg 
  hide details  
Reply
J
(15 items)
 
  
CPUMotherboardGraphicsRAM
2600k @ 4.3 Ghz P8P67  XFX 6950 w/ unlocked Shaders Patriot G2  
Hard DriveHard DriveHard DriveOptical Drive
Caviar Black Patriot Pyro SSD (sata 3)  Kingston SSDnow (sata 2) Sony DVD-RW 
CoolingMonitorKeyboardPower
Noctua NH-D14 BENQ 23" Logitech G110 Corsair TX750W 
CaseMouseMouse Pad
Corsair 500R Sidewinder X8 Saitek Cyborg 
  hide details  
Reply
post #6080 of 10701
hey guys, gonna go for a couple runs for 5.0GHz

For preliminary tests, I should set 1792 for how long, and 4096k for how long?

Anything else I should test for before I begin a 12 hour run?
Dell Optiplex 745
(10 items)
 
  
CPUMotherboardGraphicsRAM
Q6600 (incoming) Dell proprietary Intel Q965 Express Chipset XFX HD 5770 (incoming) 4GB Patriot DDR2 800 
Hard DriveOptical DriveCoolingOS
Hitachi Deskstar 160GB 7200RPM DVDRW Stock Windows XP 32 (for the time being) 
MonitorPower
Dell 22" 1680x1050 Corsair CX430 
  hide details  
Reply
Dell Optiplex 745
(10 items)
 
  
CPUMotherboardGraphicsRAM
Q6600 (incoming) Dell proprietary Intel Q965 Express Chipset XFX HD 5770 (incoming) 4GB Patriot DDR2 800 
Hard DriveOptical DriveCoolingOS
Hitachi Deskstar 160GB 7200RPM DVDRW Stock Windows XP 32 (for the time being) 
MonitorPower
Dell 22" 1680x1050 Corsair CX430 
  hide details  
Reply
New Posts  All Forums:Forum Nav:
  Return Home
  Back to Forum: Intel CPUs
  • [Official] The Sandy Stable Club **Guides, Voltages, Temps & BIOS Templates** Inc SPREADSHEET
Overclock.net › Forums › Intel › Intel CPUs › [Official] The Sandy Stable Club **Guides, Voltages, Temps & BIOS Templates** Inc SPREADSHEET