Overclock.net › Forums › Intel › Intel CPUs › [Official] The Sandy Stable Club **Guides, Voltages, Temps & BIOS Templates** Inc SPREADSHEET
New Posts  All Forums:Forum Nav:

[Official] The Sandy Stable Club **Guides, Voltages, Temps & BIOS Templates** Inc SPREADSHEET - Page 620

post #6191 of 10697
Quote:
Originally Posted by AeroZ View Post

I'm using offset voltage with LLC of High. Under full load my vcore is 1.304.
Screenshot shows no full load voltage. It sometimes jumps to 1.336 even.
402

In your screenshot, you can see that the multiplier is 45x. That alone indicate it is FULL LOAD. The fluctuation in voltage is normal because no DC voltage can be "fixed" at one single time. That is voltage fluctuation and not Vdroop smile.gif Evidently though, for munaim1, he's vcore is more controllable at High LLC than Ultra High LLC.
post #6192 of 10697
Quote:
Originally Posted by kevindd992002 View Post

Quote:
Originally Posted by AeroZ View Post

If you dont use use LLC then with medium cpu load the vdroop is low and the vcore is high. Vdroop is highest/vcore is lowest only if the cpu is under full load.

I can't visualize it. Can you give concrete value examples?

A picture is worth 1,000 words.

680

That explains it all and it even shows you what VID, Voffset, and load transients look like.

It is important to keep in mind that what LLC does is dampen the value of Vdroop, bringing it up closer to the Vidle or VID but that in turn will create more heat, consume more power, and in some cases can push you into breaking VIDmax on transients.

The reason for this is that Vdroop is actually a design feature of the CPU itself, so that during those oscillations of voltage immediately following a load transient, you don't exceed VID. So LLC is a mixed blessing; it will indeed reduce the chance of a low-out-of-spec voltage at load (low Vdroop) causing BSOD 0x0...0101 but it will also require you to reduce your Voffset or else you will exceed VID on transient load changes (Causing BSOD 0x0....0124) and it puts more of a thermal load on your entire system.

My philosophy is to keep Vdroop as low as possible without BSOD 0x0...0101 happening and use as little LLC as possible.
Edited by shad0wfax - 12/19/11 at 2:13pm
B2
(8 items)
 
  
CPUMotherboardGraphicsGraphics
Intel Core i7-5930K Haswell-E 6-Core 3.5GHz LGA... EVGA X99 Classified (151-HE-E999-KR) LGA 2011-v... EVGA 04G-P4-3975-KR GeForce GTX 970 SSC ACX 2.0... EVGA 04G-P4-3975-KR GeForce GTX 970 SSC ACX 2.0... 
RAMHard DriveCoolingCase
G.SKILL Ripjaws 4 series 16GB (4 x 4GB) 288-Pin... SAMSUNG 850 EVO MZ-75E1T0B/AM 2.5" 1TB SATA III... CORSAIR Hydro Series H100i Extreme Performance ... Phanteks Enthoo Luxe Series PH-ES614L_BK Black ... 
  hide details  
Reply
B2
(8 items)
 
  
CPUMotherboardGraphicsGraphics
Intel Core i7-5930K Haswell-E 6-Core 3.5GHz LGA... EVGA X99 Classified (151-HE-E999-KR) LGA 2011-v... EVGA 04G-P4-3975-KR GeForce GTX 970 SSC ACX 2.0... EVGA 04G-P4-3975-KR GeForce GTX 970 SSC ACX 2.0... 
RAMHard DriveCoolingCase
G.SKILL Ripjaws 4 series 16GB (4 x 4GB) 288-Pin... SAMSUNG 850 EVO MZ-75E1T0B/AM 2.5" 1TB SATA III... CORSAIR Hydro Series H100i Extreme Performance ... Phanteks Enthoo Luxe Series PH-ES614L_BK Black ... 
  hide details  
Reply
post #6193 of 10697
Thread Starter 
Quote:
Updating Spreadsheet

For those that missed it, choose your sig and wear it proudly, Copy and Paste whichever you want smile.gif smile.gif


Warning: Spoiler! (Click to show)
Code:
[CENTER][URL=http://www.overclock.net/t/968053/official-the-sandy-stable-club-benchmarks-stable-rigs-guides-inc-spreadsheet][SIZE="3"][B][FONT="Book Antiqua"][:clock:] The Sandy STABLE Club [:clock:][/FONT][/B][/SIZE][/URL]

[/CENTER]



Code:
[CENTER][URL=http://www.overclock.net/t/968053/official-the-sandy-stable-club-benchmarks-stable-rigs-guides-inc-spreadsheet][SIZE="3"][B][FONT="Book Antiqua"][:clock:] The Sandy [COLOR="DarkRed"][I]SUPER[/I][/COLOR] STABLE Club [:clock:][/FONT][/B][/SIZE][/URL][/CENTER]

BIOS TEMPLATES

I have created a sheet for BIOS templates, it could be a reference point to other's including oneself and a quick 'copy and paste' whenever required in other threads/posts etc.

Those that have posted their stable systems please spare a few minutes of your time to do this. One more thing, these are the ones im after:
  • Main BIOS page (The advanced settings main page)

  • Full AI tweaker Page including DRAM Timing control

  • CPU Configuration Page


Spreadsheet contains voltage info, temperature info, cooling info, BIOS templates and seperate sheets hava been created for all of those, including one which filters the i5 and i7. This should be helpful to SB users and those looking to get SB, it also helps provide real world data regarding how the coolers are performing, what temps people are getting with the overclocks and at what kind of votlages, I think that it s a great addition to OCN and one that SB and non SB users can benefit from.


Thanks to all that contributed to this thread and spreadsheet, would not have been possible without you guys thumb.gif


We currently have just over 240 members and we are looking for MORE tongue.gif


SO GET POSTING GUYS BUT REMEMBER TO FOLLOW THE RULES!!!!


And again thanks to all those participated, we have some excellent club members here!!!!


smile.gif
it looks alive
(17 items)
 
Sandy Transformed
(69 photos)
 
CPUMotherboardGraphicsRAM
i5 2500K [5ghz 1.44v 24/7] Asus Maximus IV Extreme SLI GTX 460 @ 920/1840/4100 [1.11v] 4GB Dominator GT @ 2133mhz CL8 [1.65v] 
Hard DriveHard DriveCoolingOS
Intel X25-M G2 80GB 3x Samsung F3 500GB RAID 0 EK Supreme HF Full Copper Windows 7 Ultimate 64bit 
MonitorPowerCaseAudio
LG42SL9500 42" 1080p [Surround Soon] XFX XXX Edition 650w Xigmatec Elysium JVC HA-RX700 [foam mod] 
  hide details  
Reply
it looks alive
(17 items)
 
Sandy Transformed
(69 photos)
 
CPUMotherboardGraphicsRAM
i5 2500K [5ghz 1.44v 24/7] Asus Maximus IV Extreme SLI GTX 460 @ 920/1840/4100 [1.11v] 4GB Dominator GT @ 2133mhz CL8 [1.65v] 
Hard DriveHard DriveCoolingOS
Intel X25-M G2 80GB 3x Samsung F3 500GB RAID 0 EK Supreme HF Full Copper Windows 7 Ultimate 64bit 
MonitorPowerCaseAudio
LG42SL9500 42" 1080p [Surround Soon] XFX XXX Edition 650w Xigmatec Elysium JVC HA-RX700 [foam mod] 
  hide details  
Reply
post #6194 of 10697
I upgraded my cooling so this is my new submission if that's alright.

375
post #6195 of 10697
Thread Starter 
Thanks bud, will update your submission. Thanks again.
it looks alive
(17 items)
 
Sandy Transformed
(69 photos)
 
CPUMotherboardGraphicsRAM
i5 2500K [5ghz 1.44v 24/7] Asus Maximus IV Extreme SLI GTX 460 @ 920/1840/4100 [1.11v] 4GB Dominator GT @ 2133mhz CL8 [1.65v] 
Hard DriveHard DriveCoolingOS
Intel X25-M G2 80GB 3x Samsung F3 500GB RAID 0 EK Supreme HF Full Copper Windows 7 Ultimate 64bit 
MonitorPowerCaseAudio
LG42SL9500 42" 1080p [Surround Soon] XFX XXX Edition 650w Xigmatec Elysium JVC HA-RX700 [foam mod] 
  hide details  
Reply
it looks alive
(17 items)
 
Sandy Transformed
(69 photos)
 
CPUMotherboardGraphicsRAM
i5 2500K [5ghz 1.44v 24/7] Asus Maximus IV Extreme SLI GTX 460 @ 920/1840/4100 [1.11v] 4GB Dominator GT @ 2133mhz CL8 [1.65v] 
Hard DriveHard DriveCoolingOS
Intel X25-M G2 80GB 3x Samsung F3 500GB RAID 0 EK Supreme HF Full Copper Windows 7 Ultimate 64bit 
MonitorPowerCaseAudio
LG42SL9500 42" 1080p [Surround Soon] XFX XXX Edition 650w Xigmatec Elysium JVC HA-RX700 [foam mod] 
  hide details  
Reply
post #6196 of 10697
This is my first post for overclocking. I'd just like to preface it with the fact that the main components were purchased used from OCN members, AT members, as well as Hard Forum members. The person that had this chip before me was XtremeCuztoms. I need to fine tune my O.C. certainly. I have a feeling that my thermal paste may be uneven. This shows in Real Temp as the temps are a bit off from core to core. Then again I'm merely a lurker that has been learning lol.

Overclock2.jpg 697k .jpg file
ASUS ROG G73JH-A1
(13 items)
 
  
CPUGraphicsRAMHard Drive
Core i7 720QM ATI Mobility Radeon HD5870 8GB DDR3 1066mhz 2 x 500gb 7200RPM (Seagate Momentus) 
Optical DriveOSMonitorMouse
Blu-Ray Reader Windows 7 Home Premium x64 17.3" 1920 x 1080 resolution Asus ROG Razer 
  hide details  
Reply
ASUS ROG G73JH-A1
(13 items)
 
  
CPUGraphicsRAMHard Drive
Core i7 720QM ATI Mobility Radeon HD5870 8GB DDR3 1066mhz 2 x 500gb 7200RPM (Seagate Momentus) 
Optical DriveOSMonitorMouse
Blu-Ray Reader Windows 7 Home Premium x64 17.3" 1920 x 1080 resolution Asus ROG Razer 
  hide details  
Reply
post #6197 of 10697
Tons of good information in this thread. +Rep Munain1 really helped me get to where im at. Currently running prime 95 blend on my 2600k at 48x muti 1.4 vcore 1.7 pll. C-States off, HT off, temps around 75 c. Last night when i was working on x49 i was passing 20 min of 1344 FFT but 5 or so min into 1792 i was getting failures on 1 workers. Any tips to get stability at 4.9? I would like to get to 5.0 run 12-24 hrs of blend get some nice screenshots and dial it down to 4.6 or so for daily use.
post #6198 of 10697
Quote:
Originally Posted by kevindd992002 View Post

In your screenshot, you can see that the multiplier is 45x. That alone indicate it is FULL LOAD. The fluctuation in voltage is normal because no DC voltage can be "fixed" at one single time. That is voltage fluctuation and not Vdroop smile.gif Evidently though, for munaim1, he's vcore is more controllable at High LLC than Ultra High LLC.
Tho with that test which I did for the screenshot the voltage never drops to 1.304 like under load with prime. It stays 1.328 and sometimes 1.320.

In the end the question remains. What's the point of using LLC with offset.
Edited by AeroZ - 12/20/11 at 11:09pm
CM
(14 items)
 
  
CPUMotherboardGraphicsRAM
Intel Core i5 2500K Asus Sabertooth P67 Asus AMD HD7970 G.Skill F3-12800CL9-4GBXL 
Hard DriveHard DriveCoolingOS
Crucial M4 Western Digital WD5000AAKS-65YGA0 Noctua NH-D14 SE2011 Windows 7 Professional x64 
MonitorKeyboardPowerCase
Dell UltraSharp U2412M Dell keyboard Seasonic X-660 660W Cooler Master 690 II Advanced 
MouseMouse Pad
Razer Naga Razer Sphex 
  hide details  
Reply
CM
(14 items)
 
  
CPUMotherboardGraphicsRAM
Intel Core i5 2500K Asus Sabertooth P67 Asus AMD HD7970 G.Skill F3-12800CL9-4GBXL 
Hard DriveHard DriveCoolingOS
Crucial M4 Western Digital WD5000AAKS-65YGA0 Noctua NH-D14 SE2011 Windows 7 Professional x64 
MonitorKeyboardPowerCase
Dell UltraSharp U2412M Dell keyboard Seasonic X-660 660W Cooler Master 690 II Advanced 
MouseMouse Pad
Razer Naga Razer Sphex 
  hide details  
Reply
post #6199 of 10697
Quote:
Originally Posted by HBR1 View Post

Guys, I have a question here..
My rigg is stable after prime95 and all..
But there is a slight difference during my windows login..
I used to have my OC settings at 4.1Ghz [1.185 Vcore] and start up was normal..
but eversince I changed it to 4.9Ghz [1.415 Vcore], my desktop seems to take a longer time to load up..

Is this normal?

bump.. got ignored frown.gif
    
CPUMotherboardGraphicsRAM
i5 2500k 4.9Ghz ASUS P8Z68-V ASUS GTX570 Direct CU-II 16GB Kingston PC1333 
Hard DriveCoolingOSMonitor
1TB Western Digital Caviar Black SATAIII Noctua NH D-14 Windows 7 Professional 64-Bit 23" Samsung SA350 
PowerCaseMouseMouse Pad
Cooler Master Silent Pro M 700W Cooler Master 912 Advance Razer DeathAdder 3.5G Razer Goliathus Alpha 
  hide details  
Reply
    
CPUMotherboardGraphicsRAM
i5 2500k 4.9Ghz ASUS P8Z68-V ASUS GTX570 Direct CU-II 16GB Kingston PC1333 
Hard DriveCoolingOSMonitor
1TB Western Digital Caviar Black SATAIII Noctua NH D-14 Windows 7 Professional 64-Bit 23" Samsung SA350 
PowerCaseMouseMouse Pad
Cooler Master Silent Pro M 700W Cooler Master 912 Advance Razer DeathAdder 3.5G Razer Goliathus Alpha 
  hide details  
Reply
post #6200 of 10697
Try 4.8GHz instead. I've had issues with odd numbered multi's before. I can't say it's happened all the time, but it's worth a shot. Also, are you running with dynamic voltage? Do you have enough vcore for partial load?
Scorpion
(14 items)
 
  
CPUMotherboardGraphicsRAM
Intel Core i7 2500K Gigabyte GA-Z68X-UD3H-B3 MSI GeForce GTX 580 Lightning Corsair Vengeance 8GB DDR3-1600 CL9 
Hard DriveOptical DriveOSMonitor
OCZ Agility 2 120GB Samsung SH-S223L DVD-RW Windows 7 Professional 64-Bit AOC e2243Fwk 21.5" LED 
KeyboardPowerCaseMouse
XArmor U9 Mechanical Corsair HX850 Corsair Carbide Series 500R Logitech G500 
Mouse PadAudio
Nova Gaming Winner 3 Realtek ALC889 Codec 
  hide details  
Reply
Scorpion
(14 items)
 
  
CPUMotherboardGraphicsRAM
Intel Core i7 2500K Gigabyte GA-Z68X-UD3H-B3 MSI GeForce GTX 580 Lightning Corsair Vengeance 8GB DDR3-1600 CL9 
Hard DriveOptical DriveOSMonitor
OCZ Agility 2 120GB Samsung SH-S223L DVD-RW Windows 7 Professional 64-Bit AOC e2243Fwk 21.5" LED 
KeyboardPowerCaseMouse
XArmor U9 Mechanical Corsair HX850 Corsair Carbide Series 500R Logitech G500 
Mouse PadAudio
Nova Gaming Winner 3 Realtek ALC889 Codec 
  hide details  
Reply
New Posts  All Forums:Forum Nav:
  Return Home
  Back to Forum: Intel CPUs
  • [Official] The Sandy Stable Club **Guides, Voltages, Temps & BIOS Templates** Inc SPREADSHEET
Overclock.net › Forums › Intel › Intel CPUs › [Official] The Sandy Stable Club **Guides, Voltages, Temps & BIOS Templates** Inc SPREADSHEET