Originally Posted by Penryn
If you have the same ram I do I would try leaving it at stock timings even at 1600C9.
They're the CMX4GX3M2A1600C9. There's a 6GB kit of the same as well that I don't have the model number on atm but I'd also drop to 4GB so you can take advantage of dual channel.
have the same as you I have the 6 GB Kit
Originally Posted by munaim1
those settings look good, however try lowering the pll voltage to around 1.75 and increase the vccio to 1.1v and reduce the vcore by 0.01 or so, see if that helps. just a reminder it's a minimum of 12 hours bro (nearest hour)
try leaving it at 1.65 and see if you can lower the timings. then start reducing the dram volts until your not stable.
11 and a half hours I even have a screenshot of 11 hours 35 minutes rounded up it is 12 hours. So it is the nearest hour ^v^. Plus that's just Prime 95 Blend I'm running Folding at Home
smp so that should be good enough.
I'll lower pll to 1.75 ish set RAM to 1.5v and try lowering timings. 1.5v just because I wanna see if it's possible and to try and keep my memory controller intact longer.
I was planning on upping the increasing the vccio to 1.1 or 1.15 as well. I might try lowering vcore by .05v as it was unstable at 1.4v after about 3 hours.Edited by phazer11 - 4/21/11 at 10:07am