Originally Posted by phazer11;13233432
I'm closing in on 5 GHz!
Munaim you going to send me those settings? I'm rocking out with these new fans from my old cooler.
These are my settings, might have to tweak it a bit for yourself but hopefully it should work fine
Everything is on auto apart from the things below:
Manual vcore at 1.480
(idles at 1.480 and loads 1.472)
BCLK on 100
Turbo ratio by each core - 51
PLL overvoltage Enabled
LLC (load line calibration) - Ultra high
(Extreme, spikes voltages above 1.49)
VRM frequency - Manual 350
Phase and Duy Control - Extreme
CPU current capability - 120%
VCCIO - 1.1
PLL Voltage - 1.75
By the way Zodden
, phaser11, bce22 scorpion667 have been added, awesome overclock guys. But please remeber to post your memory tab from cpu-z, just makes it easier for me to write down without having to chase you!!!!
Keep it coming.
Unfortunatly zodden, I cannot accept this, please refer to op.
Edited by munaim1 - 4/22/11 at 4:44pm
Only difference I see between the Realtemp and Coretemp is the gui and the most important thing is that real temp actually shows how long its been running so its possible to know wether it has been running for 12 min or 12 hours. That way we can see the duration and also when the temps have peaked. It provides time stamps in other words which is great.
So please use real temp.