Overclock.net › Forums › Intel › Intel CPUs › [Official] The Sandy Stable Club **Guides, Voltages, Temps & BIOS Templates** Inc SPREADSHEET
New Posts  All Forums:Forum Nav:

[Official] The Sandy Stable Club **Guides, Voltages, Temps & BIOS Templates** Inc SPREADSHEET - Page 759

post #7581 of 10701
Thread Starter 
For those that missed it, choose your sig and wear it proudly, Copy and Paste whichever you want smile.gif smile.gif


Warning: Spoiler! (Click to show)
Code:
[CENTER][URL=http://www.overclock.net/t/968053/official-the-sandy-stable-club-benchmarks-stable-rigs-guides-inc-spreadsheet][SIZE="3"][B][FONT="Book Antiqua"][:clock:] The Sandy STABLE Club [:clock:][/FONT][/B][/SIZE][/URL]

[/CENTER]



Code:
[CENTER][URL=http://www.overclock.net/t/968053/official-the-sandy-stable-club-benchmarks-stable-rigs-guides-inc-spreadsheet][SIZE="3"][B][FONT="Book Antiqua"][:clock:] The Sandy [COLOR="DarkRed"][I]SUPER[/I][/COLOR] STABLE Club [:clock:][/FONT][/B][/SIZE][/URL][/CENTER]

BIOS TEMPLATES

I have created a sheet for BIOS templates, it could be a reference point to other's including oneself and a quick 'copy and paste' whenever required in other threads/posts etc.

Those that have posted their stable systems please spare a few minutes of your time to do this. One more thing, these are the ones I’m after:
  • Main BIOS page (The advanced settings main page)

  • Full AI tweaker Page including DRAM Timing control

  • CPU Configuration Page


Spread sheet contains voltage info, temperature info, cooling info, BIOS templates and separate sheets have been created for all of those, including one which filters the i5 and i7. This should be helpful to SB users and those looking to get SB, it also helps provide real world data regarding how the coolers are performing, what temps people are getting with the overclocks and at what kind of voltages, I think that it’s a great addition to OCN and one that SB and non SB users can benefit from.


Thanks to all that contributed to this thread and spread sheet, would not have been possible without you guys thumb.gif


We currently have just over 330 members and we are looking for MORE tongue.gif


SO GET POSTING GUYS BUT REMEMBER TO FOLLOW THE RULES!!!!


And again thanks to all those participated, we have some excellent club members here!!!!

Quote:
Spreadsheet Updated

smile.gif

EDIT:

Apologies for the delay but the spreadsheet should show the updated changes now smile.gif Thank you all for your patience.
Edited by munaim1 - 2/27/12 at 12:34pm
it looks alive
(17 items)
 
Sandy Transformed
(69 photos)
 
CPUMotherboardGraphicsRAM
i5 2500K [5ghz 1.44v 24/7] Asus Maximus IV Extreme SLI GTX 460 @ 920/1840/4100 [1.11v] 4GB Dominator GT @ 2133mhz CL8 [1.65v] 
Hard DriveHard DriveCoolingOS
Intel X25-M G2 80GB 3x Samsung F3 500GB RAID 0 EK Supreme HF Full Copper Windows 7 Ultimate 64bit 
MonitorPowerCaseAudio
LG42SL9500 42" 1080p [Surround Soon] XFX XXX Edition 650w Xigmatec Elysium JVC HA-RX700 [foam mod] 
  hide details  
Reply
it looks alive
(17 items)
 
Sandy Transformed
(69 photos)
 
CPUMotherboardGraphicsRAM
i5 2500K [5ghz 1.44v 24/7] Asus Maximus IV Extreme SLI GTX 460 @ 920/1840/4100 [1.11v] 4GB Dominator GT @ 2133mhz CL8 [1.65v] 
Hard DriveHard DriveCoolingOS
Intel X25-M G2 80GB 3x Samsung F3 500GB RAID 0 EK Supreme HF Full Copper Windows 7 Ultimate 64bit 
MonitorPowerCaseAudio
LG42SL9500 42" 1080p [Surround Soon] XFX XXX Edition 650w Xigmatec Elysium JVC HA-RX700 [foam mod] 
  hide details  
Reply
post #7582 of 10701
Quote:
Originally Posted by MooMoo View Post

Bah, didnt get this to edit "And to correct, default is not 1.8V, you would fry something with those voltages. biggrin.gif"

Ya I'm an idiot I was looking at the PLL voltage.

So right now my voltage for 4.8 is 1.408v and when I bump my VCore up 2 notches to 1.425ish the 124 errors stop and then the 9C appears. Do you think I may need more VCore as opposed to messing with the VCCIO? I only ask because I feel like its crazy unrealistic that I can get 5Ghz with 1.425vcore...and I have NO experience with messing with the VCCIO.
post #7583 of 10701
Thread Starter 
Quote:
Originally Posted by Crabby654 View Post

Quote:
Originally Posted by MooMoo View Post

Bah, didnt get this to edit "And to correct, default is not 1.8V, you would fry something with those voltages. biggrin.gif"

Ya I'm an idiot I was looking at the PLL voltage.

So right now my voltage for 4.8 is 1.408v and when I bump my VCore up 2 notches to 1.425ish the 124 errors stop and then the 9C appears. Do you think I may need more VCore as opposed to messing with the VCCIO? I only ask because I feel like its crazy unrealistic that I can get 5Ghz with 1.425vcore...and I have NO experience with messing with the VCCIO.

Try increasing the VCCIO (VTT - IMC) voltage, it could help with overall stability, if you're on auto, try increasing that up to 1.15v in small increments (shouldn't need anything higher).
it looks alive
(17 items)
 
Sandy Transformed
(69 photos)
 
CPUMotherboardGraphicsRAM
i5 2500K [5ghz 1.44v 24/7] Asus Maximus IV Extreme SLI GTX 460 @ 920/1840/4100 [1.11v] 4GB Dominator GT @ 2133mhz CL8 [1.65v] 
Hard DriveHard DriveCoolingOS
Intel X25-M G2 80GB 3x Samsung F3 500GB RAID 0 EK Supreme HF Full Copper Windows 7 Ultimate 64bit 
MonitorPowerCaseAudio
LG42SL9500 42" 1080p [Surround Soon] XFX XXX Edition 650w Xigmatec Elysium JVC HA-RX700 [foam mod] 
  hide details  
Reply
it looks alive
(17 items)
 
Sandy Transformed
(69 photos)
 
CPUMotherboardGraphicsRAM
i5 2500K [5ghz 1.44v 24/7] Asus Maximus IV Extreme SLI GTX 460 @ 920/1840/4100 [1.11v] 4GB Dominator GT @ 2133mhz CL8 [1.65v] 
Hard DriveHard DriveCoolingOS
Intel X25-M G2 80GB 3x Samsung F3 500GB RAID 0 EK Supreme HF Full Copper Windows 7 Ultimate 64bit 
MonitorPowerCaseAudio
LG42SL9500 42" 1080p [Surround Soon] XFX XXX Edition 650w Xigmatec Elysium JVC HA-RX700 [foam mod] 
  hide details  
Reply
post #7584 of 10701
Hey munaim1 after I've gone through the hassle and trial and error of finding the sweet spot for PLL voltage for a given chip would that voltage need to be changed if changing motherboards or can I assume that a known good PLL value is related to the chip not the motherboard?
Main Rig
(16 items)
 
  
CPUMotherboardGraphicsRAM
Intel i7 2700k ASUS P8P67 WS Revolution EVGA 980 Ti SC+ Samsung 4x4GB DDR3 1866MHz 
Hard DriveHard DriveOptical DriveCooling
Samsung 850 Evo 1TB Samsung Spinpoint F4 2TB Samsung BD Combo Noctua NH-D14 
OSMonitorPowerCase
Windows 10 64 bit Asus PG279Q Kingwin Lazer Platinum 1000W Silverstone Raven RV03 
  hide details  
Reply
Main Rig
(16 items)
 
  
CPUMotherboardGraphicsRAM
Intel i7 2700k ASUS P8P67 WS Revolution EVGA 980 Ti SC+ Samsung 4x4GB DDR3 1866MHz 
Hard DriveHard DriveOptical DriveCooling
Samsung 850 Evo 1TB Samsung Spinpoint F4 2TB Samsung BD Combo Noctua NH-D14 
OSMonitorPowerCase
Windows 10 64 bit Asus PG279Q Kingwin Lazer Platinum 1000W Silverstone Raven RV03 
  hide details  
Reply
post #7585 of 10701
Thread Starter 
Quote:
Originally Posted by juano View Post

Hey munaim1 after I've gone through the hassle and trial and error of finding the sweet spot for PLL voltage for a given chip would that voltage need to be changed if changing motherboards or can I assume that a known good PLL value is related to the chip not the motherboard?

As explained before (and I think it was you who asked this question originally) I think it's dependant on motherboard not the cpu. More info here:

Quote:
Originally Posted by munaim1 View Post



More info about VTT/QPI (VCCIO) and PLL voltage:

READ THIS:
click me (Click to show)
Quote:
Quote:
Originally Posted by juano;15281520 
It did pass like 8 hours of prime blend max RAM usage and ~30 minutes of each of the two recommended FTTs at these settings. I have read the OP of the solving 124 BSOD post, that's why I mentioned that I rolled my GPU drivers back from the latest beta ones that have been reported to cause 124 BSODs.

Well, I can't say much about the GPU driver's as I have not personally used them. In regards to Prime testing I would say , you should really run it a little longer, especially because you do folding.
Quote:
Originally Posted by juano;15281520 
Also as I mentioned I know to try starting low and increasing the PLL should this BSOD happen again. What I was really asking was two things, first would I want to also try lowering the VCCIO as a possible solution for 124 BSOD or would increasing it be much more likely?

Default VCCIO is around 1.05/1.07 I believe, VTT and QPI is the VCCIO setting for sandybridge, that is why Bsod 124 can be related to VCCIO. Increasing it does help stability, but if you reach a certain point, it'll just become unstable. It is either st on auto or increased, not usually lowered form it's stock setting.

Quote:
Originally Posted by juano;15281520 
Also expected or common values that these two would be need to be changed to would be appreciated. As I understand it 1.1v is the default and 1.2v is the max for VCCIO but have you noticed a trend in most people solving 124 at 1.15 or 1.05.

Unfortunatly I can't really say, I've been through hundred of overclocks and can't really remember, however there is one thing that does come to mind regarding vccio. Usually when you're overclocking ram going above 1.1v can help, but between stock VCCIO and 1.1v it can help general stability, but remember increasing it too much will more than likely cause you instability and generate the same heat that vcore would. People think that using vcccio is a substitute for vcore, unfortunatly I don't see it that way.

Increasing VCCIO (Vtt) helps when you start to strain the IMC of the chip, when using high RAM usage in prime95 etc (instability) therefore a small boost to the vccio can help with that stability providing that you have cooling in the first place to maintain your cpu's temperature.

Hope that makes sense.

Quote:
Originally Posted by juano;15281520 
Past answers to those two questions and reading the entire "fixing 124 BSOD" thread ( I already read the 2500k OC help thread and the OP of fixing 124) is there anything else I ought to know to try before increasing vcore should this BSOD happen again?

124 is a little tricky as you have gathered, turning that error code into something else can actually be done just by the VTT and PLL voltage alone, even if you get it to 101 atleast you know that's it's vcore that you need, or an error code showing OS corruption etc.

What I would advise is that you run the Hard FFT's for around 1 hour each and see how far you get, if you get the infamous 124, then I wuld recommend that you start with the PLL votlage, reduce it all the way to 1.5v and start again with the FFT's, keep on doing until you find one value (sweetspot) that nets you the most duration in prime and note that down, then take it back to PLL back to auto and do the same for the VCCIO, obviously use the smallest increments as possible and test with prime blend.

Hopefully when you find a sweet spot for both (could be PLL voltage at 1.6125v and VCCIO on auto or PLL voltage at 1.6875v and VCCIO on 1.095v)

You can combine them together and retest with prime and see what happens. It is a very tedious process and one that requires a lot of patience.

Hope that helps thumb.gif
Quote:
Originally Posted by chalamah;15274110 
munaim1,
I have a question regarding the help you gave someone in this post
http://www.overclock.net/intel-cpus/1125843-2500k-overclocking-help-5.html
When you worked out the sweet spot for VTT and PLL @ a 47 multiplier, does that sweet spot only apply for that multiplier or would it be the same for say a 49 or 50 multiplier?

To be perfectly honest, I really don't know. Because the proess can be tedious, I didn't really test it with a different mulitplier, it just depends on how it reacts to that particular overclock, so on that note I would say probably not, the vtt and pll sweet spot is probably depedndant on that particular multiplier. Sorry I cannot give you a exact answer to that question.



EDIT Just to add to what I said above and after a little bit of thinking lol tongue.gif:

Actually, I can maybe try and explain this to the best of my ability, lets just say that between 4.5 to 4.8 you recieve bsod 101 after tweaking the vtt and pll for 4.5ghz, so at that point you would obivously continue increasing the vcore until you're stable, however they may be a point during that time that the 124 may arise, that doesn't mean that the vtt and pll sweet spot has changed and it needs to be tweaked again, because remember 124 can also be vcore, so on that note you continue increasing the vcore until you reach a point of stabiity, however that trully depends on the potential of that particular chip. But and this is important, overclocking is not a guarentee, so in order to 'find' your overclock you will need to set yourself a target and that should be by vcore and temp, not clock speed that will allow you to really see the potential of that chip under those conditions.

If you read about VTT just above (explained to Juano), I would say it doesn't really need to be changed once you find the sweet spot, as the IMC won't be stressed unless you really start pumping insane voltages and overclocking the RAM, so that just leaves the PLL voltage. Recent findings have suggested that lowering PLL voltage can help, however that is not universal amongst every motherboard, so whether or not that dependant on clock speed or the motherboard I really don't know, but I I would say motherboard. So to conlude, I would say I retract what I said before about maybe having to change the vtt and pll for higher multi's because imho the pll is tied to the motherboard and the vtt doesn't really have to change, therefore it just leave's the vcore. But again that is what think and I have gathered so far. I might be wrong lol tongue.gif

it looks alive
(17 items)
 
Sandy Transformed
(69 photos)
 
CPUMotherboardGraphicsRAM
i5 2500K [5ghz 1.44v 24/7] Asus Maximus IV Extreme SLI GTX 460 @ 920/1840/4100 [1.11v] 4GB Dominator GT @ 2133mhz CL8 [1.65v] 
Hard DriveHard DriveCoolingOS
Intel X25-M G2 80GB 3x Samsung F3 500GB RAID 0 EK Supreme HF Full Copper Windows 7 Ultimate 64bit 
MonitorPowerCaseAudio
LG42SL9500 42" 1080p [Surround Soon] XFX XXX Edition 650w Xigmatec Elysium JVC HA-RX700 [foam mod] 
  hide details  
Reply
it looks alive
(17 items)
 
Sandy Transformed
(69 photos)
 
CPUMotherboardGraphicsRAM
i5 2500K [5ghz 1.44v 24/7] Asus Maximus IV Extreme SLI GTX 460 @ 920/1840/4100 [1.11v] 4GB Dominator GT @ 2133mhz CL8 [1.65v] 
Hard DriveHard DriveCoolingOS
Intel X25-M G2 80GB 3x Samsung F3 500GB RAID 0 EK Supreme HF Full Copper Windows 7 Ultimate 64bit 
MonitorPowerCaseAudio
LG42SL9500 42" 1080p [Surround Soon] XFX XXX Edition 650w Xigmatec Elysium JVC HA-RX700 [foam mod] 
  hide details  
Reply
post #7586 of 10701
Hello guys!

I just wanted to let u know that I m finishing my water cooling build this week(hopefully) and that i will be going for 5+ ghz! biggrin.gifbiggrin.gif

I was thinking about OC my ram too and i wanted to hear YOUR thoughts on what is a safe high VTT(memory controller) voltage?
Zeus
(16 items)
 
  
CPUMotherboardGraphicsRAM
i5 2500k 5 Ghz @ 1.488 V 24/7 Asrock p67 extreme 4 B3 Gainward GTX 570 GS GLH @ 850/2100 @ 1.00V 2x4 Gb G:SKILL Sniper @ 1600 9-9-9-24 t1 @ 1.260 V 
Hard DriveOptical DriveCoolingCooling
RAID-2xWD Sata3 Blue 500 Gb + 1xWD Sata3 Green 2TB none RAD: EK XTC 420 CPU Block: EK-Supreme HF - Full Nickel-EN 
CoolingOSMonitorKeyboard
GPU Block: EK Universal EN Win7 Professional 64Bit LG Flatron M2362D 23"[1920x1080] Steelseries 6GV2 
PowerCaseMouseMouse Pad
XFX PRO 550W CoolerMaster CM690 II Nvidia Edition Razer DeathAdder 3500Dpi Left hand edition Razer Goliathus Speed 
  hide details  
Reply
Zeus
(16 items)
 
  
CPUMotherboardGraphicsRAM
i5 2500k 5 Ghz @ 1.488 V 24/7 Asrock p67 extreme 4 B3 Gainward GTX 570 GS GLH @ 850/2100 @ 1.00V 2x4 Gb G:SKILL Sniper @ 1600 9-9-9-24 t1 @ 1.260 V 
Hard DriveOptical DriveCoolingCooling
RAID-2xWD Sata3 Blue 500 Gb + 1xWD Sata3 Green 2TB none RAD: EK XTC 420 CPU Block: EK-Supreme HF - Full Nickel-EN 
CoolingOSMonitorKeyboard
GPU Block: EK Universal EN Win7 Professional 64Bit LG Flatron M2362D 23"[1920x1080] Steelseries 6GV2 
PowerCaseMouseMouse Pad
XFX PRO 550W CoolerMaster CM690 II Nvidia Edition Razer DeathAdder 3500Dpi Left hand edition Razer Goliathus Speed 
  hide details  
Reply
post #7587 of 10701
Alright well I will test out all the possible PLL ranges again on this 2600k on the Maximus Gene-z gen3 and see what PLL it likes on that board and if it's different from what I found on the P67 WS Revo board because I know that the sweet spot for this chip on the P67 WS was 1.650v... I'd much rather be GPU overclocking mad.gif there it's basically just if unstable add more volts, if still unstable then add more cooling and you can get a pretty decent idea of a stable OC in an afternoon, this stuff takes forever.
Main Rig
(16 items)
 
  
CPUMotherboardGraphicsRAM
Intel i7 2700k ASUS P8P67 WS Revolution EVGA 980 Ti SC+ Samsung 4x4GB DDR3 1866MHz 
Hard DriveHard DriveOptical DriveCooling
Samsung 850 Evo 1TB Samsung Spinpoint F4 2TB Samsung BD Combo Noctua NH-D14 
OSMonitorPowerCase
Windows 10 64 bit Asus PG279Q Kingwin Lazer Platinum 1000W Silverstone Raven RV03 
  hide details  
Reply
Main Rig
(16 items)
 
  
CPUMotherboardGraphicsRAM
Intel i7 2700k ASUS P8P67 WS Revolution EVGA 980 Ti SC+ Samsung 4x4GB DDR3 1866MHz 
Hard DriveHard DriveOptical DriveCooling
Samsung 850 Evo 1TB Samsung Spinpoint F4 2TB Samsung BD Combo Noctua NH-D14 
OSMonitorPowerCase
Windows 10 64 bit Asus PG279Q Kingwin Lazer Platinum 1000W Silverstone Raven RV03 
  hide details  
Reply
post #7588 of 10701
I just rebuilt Lola with the current components. Its a nice upgrade from the previous Dual Core E8600/EVGA 780i/4GB DDR2/HDDs RAID0.

My best OC with the E8600 was 4.5GHz, so that is where I am starting with the 2500K.

It could not have been easier. A few BIOS changes and boom 4.5GHz rock stable.wheee.gif Now to reseat the H80 again. Not too impressed with the temps, although there were high ambient temps during half of the stresstest.

361
Edited by franz - 2/27/12 at 2:13pm
Lola
(17 items)
 
Charlestown
(10 items)
 
 
CPUMotherboardGraphicsRAM
2500K ASRock Z68 Extreme7 EVGA GTX 760 2x4GB Mushkin 996998 
Hard DriveHard DriveHard DriveOptical Drive
Samsung 830 256GB 2x WD RE3 RAID0 Seagate 3TB Backup 2x Samsung 223B 
CoolingOSMonitorKeyboard
Corsair H80 Win7 64Bit Samsung 226CW Razer Lycosa 
PowerCaseMouseMouse Pad
Seasonic X-650 Antec 1200 Logitech G500 Razer eXactMat 
Audio
Auzentech Prelude 
  hide details  
Reply
Lola
(17 items)
 
Charlestown
(10 items)
 
 
CPUMotherboardGraphicsRAM
2500K ASRock Z68 Extreme7 EVGA GTX 760 2x4GB Mushkin 996998 
Hard DriveHard DriveHard DriveOptical Drive
Samsung 830 256GB 2x WD RE3 RAID0 Seagate 3TB Backup 2x Samsung 223B 
CoolingOSMonitorKeyboard
Corsair H80 Win7 64Bit Samsung 226CW Razer Lycosa 
PowerCaseMouseMouse Pad
Seasonic X-650 Antec 1200 Logitech G500 Razer eXactMat 
Audio
Auzentech Prelude 
  hide details  
Reply
post #7589 of 10701
Quote:
Originally Posted by franz View Post

I just rebuilt Lola with the current components. Its a nice upgrade from the previous Dual Core E8600/EVGA 780i/4GB DDR2/HDDs RAID0.
My best OC with the E8600 was 4.5GHz, so that is where I am starting with the 2500K.
It could not have been easier. A few BIOS changes and boom 4.5GHz rock stable.wheee.gif Now to reseat the H80 again. Not too impressed with the temps, although there were high ambient temps during half of the stresstest.
361

Nice chip you got there. Whats your PLL at? lowering it may help with your temps otherwise your temps are pretty good. No reason you shouldn't hit 5.0 easily with that voltage.

Edit: nvm, I see your PLL now in the screenie.... have you tried below 1.6? I once thought my PLL sweet spot was 1.7 but I did my 20 hour 4.7 run at 1.56
Edited by Jayjr1105 - 2/27/12 at 3:24pm
I have Ryzen!
(13 items)
 
  
CPUMotherboardGraphicsRAM
Ryzen 5 1600 3.7GHz 1.3v MSI B350M Mortar Arctic Asus Strix RX470 4GB Corsair Vengance LPX 3200 16GB 
Hard DriveHard DriveCoolingOS
Intel 520 240GB Transcend 480GB Wraith Spire Windows 10 Pro x64 
MonitorKeyboardPowerCase
Dell UltraSharp U2412M CM Quick Fire (Brown Switches) Rosewill Valens 500W Gold Corsiar Carbide Air 240 
Mouse
Zowie 
  hide details  
Reply
I have Ryzen!
(13 items)
 
  
CPUMotherboardGraphicsRAM
Ryzen 5 1600 3.7GHz 1.3v MSI B350M Mortar Arctic Asus Strix RX470 4GB Corsair Vengance LPX 3200 16GB 
Hard DriveHard DriveCoolingOS
Intel 520 240GB Transcend 480GB Wraith Spire Windows 10 Pro x64 
MonitorKeyboardPowerCase
Dell UltraSharp U2412M CM Quick Fire (Brown Switches) Rosewill Valens 500W Gold Corsiar Carbide Air 240 
Mouse
Zowie 
  hide details  
Reply
post #7590 of 10701
Quote:
Originally Posted by Jayjr1105 View Post

Nice chip you got there. Whats your PLL at? lowering it may help with your temps otherwise your temps are pretty good. No reason you shouldn't hit 5.0 easily with that voltage.
Edit: nvm, I see your PLL now in the screenie.... have you tried below 1.6? I once thought my PLL sweet spot was 1.7 but I did my 20 hour 4.7 run at 1.56

Yeah I am pretty happy so far with this baby. I have not messed with PLL, that voltage is the Auto setting, although I have seen many posts saying most mobos are pushing higher voltage than necessary. Now that I know the vCore and RAM voltages are stable I will look at the PLL.
Lola
(17 items)
 
Charlestown
(10 items)
 
 
CPUMotherboardGraphicsRAM
2500K ASRock Z68 Extreme7 EVGA GTX 760 2x4GB Mushkin 996998 
Hard DriveHard DriveHard DriveOptical Drive
Samsung 830 256GB 2x WD RE3 RAID0 Seagate 3TB Backup 2x Samsung 223B 
CoolingOSMonitorKeyboard
Corsair H80 Win7 64Bit Samsung 226CW Razer Lycosa 
PowerCaseMouseMouse Pad
Seasonic X-650 Antec 1200 Logitech G500 Razer eXactMat 
Audio
Auzentech Prelude 
  hide details  
Reply
Lola
(17 items)
 
Charlestown
(10 items)
 
 
CPUMotherboardGraphicsRAM
2500K ASRock Z68 Extreme7 EVGA GTX 760 2x4GB Mushkin 996998 
Hard DriveHard DriveHard DriveOptical Drive
Samsung 830 256GB 2x WD RE3 RAID0 Seagate 3TB Backup 2x Samsung 223B 
CoolingOSMonitorKeyboard
Corsair H80 Win7 64Bit Samsung 226CW Razer Lycosa 
PowerCaseMouseMouse Pad
Seasonic X-650 Antec 1200 Logitech G500 Razer eXactMat 
Audio
Auzentech Prelude 
  hide details  
Reply
New Posts  All Forums:Forum Nav:
  Return Home
  Back to Forum: Intel CPUs
  • [Official] The Sandy Stable Club **Guides, Voltages, Temps & BIOS Templates** Inc SPREADSHEET
Overclock.net › Forums › Intel › Intel CPUs › [Official] The Sandy Stable Club **Guides, Voltages, Temps & BIOS Templates** Inc SPREADSHEET