Overclock.net › Forums › Intel › Intel CPUs › [Official] The Sandy Stable Club **Guides, Voltages, Temps & BIOS Templates** Inc SPREADSHEET
New Posts  All Forums:Forum Nav:

[Official] The Sandy Stable Club **Guides, Voltages, Temps & BIOS Templates** Inc SPREADSHEET - Page 764

post #7631 of 10701
Quote:
Originally Posted by Twistacles View Post

If my cpu does 4.6ghz with auto everything, does that mean it's a good chip or does it not mean anything at all?


It means that you can probably get 4.7 GHz manual with a finely tuned configuration at lower voltages and temperatures than the automatic 4.6 GHz. And with a bit of work, you can probably expect to get 4.8 or 4.9 GHz as well. It's a nice gauge.

B2
(8 items)
 
  
CPUMotherboardGraphicsGraphics
Intel Core i7-5930K Haswell-E 6-Core 3.5GHz LGA... EVGA X99 Classified (151-HE-E999-KR) LGA 2011-v... EVGA 04G-P4-3975-KR GeForce GTX 970 SSC ACX 2.0... EVGA 04G-P4-3975-KR GeForce GTX 970 SSC ACX 2.0... 
RAMHard DriveCoolingCase
G.SKILL Ripjaws 4 series 16GB (4 x 4GB) 288-Pin... SAMSUNG 850 EVO MZ-75E1T0B/AM 2.5" 1TB SATA III... CORSAIR Hydro Series H100i Extreme Performance ... Phanteks Enthoo Luxe Series PH-ES614L_BK Black ... 
  hide details  
Reply
B2
(8 items)
 
  
CPUMotherboardGraphicsGraphics
Intel Core i7-5930K Haswell-E 6-Core 3.5GHz LGA... EVGA X99 Classified (151-HE-E999-KR) LGA 2011-v... EVGA 04G-P4-3975-KR GeForce GTX 970 SSC ACX 2.0... EVGA 04G-P4-3975-KR GeForce GTX 970 SSC ACX 2.0... 
RAMHard DriveCoolingCase
G.SKILL Ripjaws 4 series 16GB (4 x 4GB) 288-Pin... SAMSUNG 850 EVO MZ-75E1T0B/AM 2.5" 1TB SATA III... CORSAIR Hydro Series H100i Extreme Performance ... Phanteks Enthoo Luxe Series PH-ES614L_BK Black ... 
  hide details  
Reply
post #7632 of 10701
so i oc'd my 2600k, mive, h100 cooler.

i auto oc'd to 4.6ghz

how can i push my cpu to full load so i can check the temps?

where do i look for max temp because there are a few that says max in real temp?
post #7633 of 10701
Quote:
Originally Posted by Twistacles View Post

Thx for the info.
If my cpu does 4.6ghz with auto everything, does that mean it's a good chip or does it not mean anything at all?

A good chip is usually determined by how much voltage it needs to be stable at a given frequency. So a 4.5Ghz chip that needs only 1.25v to be 12 hours stable is a more efficient chip than a 4.5Ghz one that needs 1.35 volts. Granted the user has adjusted all the correct settings in the BIOS.
I have Ryzen!
(13 items)
 
  
CPUMotherboardGraphicsRAM
Ryzen 5 1600 3.7GHz 1.3v MSI B350M Mortar Arctic Asus Strix RX470 4GB Corsair Vengance LPX 3200 16GB 
Hard DriveHard DriveCoolingOS
Intel 520 240GB Transcend 480GB Wraith Spire Windows 10 Pro x64 
MonitorKeyboardPowerCase
Dell UltraSharp U2412M CM Quick Fire (Brown Switches) Rosewill Valens 500W Gold Corsiar Carbide Air 240 
Mouse
Zowie 
  hide details  
Reply
I have Ryzen!
(13 items)
 
  
CPUMotherboardGraphicsRAM
Ryzen 5 1600 3.7GHz 1.3v MSI B350M Mortar Arctic Asus Strix RX470 4GB Corsair Vengance LPX 3200 16GB 
Hard DriveHard DriveCoolingOS
Intel 520 240GB Transcend 480GB Wraith Spire Windows 10 Pro x64 
MonitorKeyboardPowerCase
Dell UltraSharp U2412M CM Quick Fire (Brown Switches) Rosewill Valens 500W Gold Corsiar Carbide Air 240 
Mouse
Zowie 
  hide details  
Reply
post #7634 of 10701
375

Moving from 4.7ghz down to 4.5ghz with super stable setup.
CM
(14 items)
 
  
CPUMotherboardGraphicsRAM
Intel Core i5 2500K Asus Sabertooth P67 Asus AMD HD7970 G.Skill F3-12800CL9-4GBXL 
Hard DriveHard DriveCoolingOS
Crucial M4 Western Digital WD5000AAKS-65YGA0 Noctua NH-D14 SE2011 Windows 7 Professional x64 
MonitorKeyboardPowerCase
Dell UltraSharp U2412M Dell keyboard Seasonic X-660 660W Cooler Master 690 II Advanced 
MouseMouse Pad
Razer Naga Razer Sphex 
  hide details  
Reply
CM
(14 items)
 
  
CPUMotherboardGraphicsRAM
Intel Core i5 2500K Asus Sabertooth P67 Asus AMD HD7970 G.Skill F3-12800CL9-4GBXL 
Hard DriveHard DriveCoolingOS
Crucial M4 Western Digital WD5000AAKS-65YGA0 Noctua NH-D14 SE2011 Windows 7 Professional x64 
MonitorKeyboardPowerCase
Dell UltraSharp U2412M Dell keyboard Seasonic X-660 660W Cooler Master 690 II Advanced 
MouseMouse Pad
Razer Naga Razer Sphex 
  hide details  
Reply
post #7635 of 10701
Here are the BIOS screenies from my 4.8GHz stable post.

450

450

450

450

450
Lola
(17 items)
 
Charlestown
(10 items)
 
 
CPUMotherboardGraphicsRAM
2500K ASRock Z68 Extreme7 EVGA GTX 760 2x4GB Mushkin 996998 
Hard DriveHard DriveHard DriveOptical Drive
Samsung 830 256GB 2x WD RE3 RAID0 Seagate 3TB Backup 2x Samsung 223B 
CoolingOSMonitorKeyboard
Corsair H80 Win7 64Bit Samsung 226CW Razer Lycosa 
PowerCaseMouseMouse Pad
Seasonic X-650 Antec 1200 Logitech G500 Razer eXactMat 
Audio
Auzentech Prelude 
  hide details  
Reply
Lola
(17 items)
 
Charlestown
(10 items)
 
 
CPUMotherboardGraphicsRAM
2500K ASRock Z68 Extreme7 EVGA GTX 760 2x4GB Mushkin 996998 
Hard DriveHard DriveHard DriveOptical Drive
Samsung 830 256GB 2x WD RE3 RAID0 Seagate 3TB Backup 2x Samsung 223B 
CoolingOSMonitorKeyboard
Corsair H80 Win7 64Bit Samsung 226CW Razer Lycosa 
PowerCaseMouseMouse Pad
Seasonic X-650 Antec 1200 Logitech G500 Razer eXactMat 
Audio
Auzentech Prelude 
  hide details  
Reply
post #7636 of 10701
I was trying to get it stable at 5 ghz with 1.49v, but my pc just froze. It didn't actually BSOD. Does that mean it's close to being stable?
My System
(20 items)
 
  
CPUMotherboardGraphicsGraphics
5960x Rampage V Extreme GTX 980 Ti GTX 980 Ti 
GraphicsGraphicsRAMHard Drive
GTX 980 Ti GTX 980 Ti 16GB Intel X25-M G2 160GB Raid 0 
CoolingCoolingCoolingCooling
EK Supremacy EVO 2x MO-RA3 420 18x Noiseblocker PK-1 140mm MCP35X2 
OSMonitorPowerCase
7 Ultimate 3007WFP-HC Corsair AX1500i Antec 1200 
  hide details  
Reply
My System
(20 items)
 
  
CPUMotherboardGraphicsGraphics
5960x Rampage V Extreme GTX 980 Ti GTX 980 Ti 
GraphicsGraphicsRAMHard Drive
GTX 980 Ti GTX 980 Ti 16GB Intel X25-M G2 160GB Raid 0 
CoolingCoolingCoolingCooling
EK Supremacy EVO 2x MO-RA3 420 18x Noiseblocker PK-1 140mm MCP35X2 
OSMonitorPowerCase
7 Ultimate 3007WFP-HC Corsair AX1500i Antec 1200 
  hide details  
Reply
post #7637 of 10701
Quote:
Originally Posted by theyedi View Post

I was trying to get it stable at 5 ghz with 1.49v, but my pc just froze. It didn't actually BSOD. Does that mean it's close to being stable?

No, that's pretty much on par with a BSOD. 1.49 volts is a lot for 5.0Ghz. Are you freezing while idle or running a stress test?
I have Ryzen!
(13 items)
 
  
CPUMotherboardGraphicsRAM
Ryzen 5 1600 3.7GHz 1.3v MSI B350M Mortar Arctic Asus Strix RX470 4GB Corsair Vengance LPX 3200 16GB 
Hard DriveHard DriveCoolingOS
Intel 520 240GB Transcend 480GB Wraith Spire Windows 10 Pro x64 
MonitorKeyboardPowerCase
Dell UltraSharp U2412M CM Quick Fire (Brown Switches) Rosewill Valens 500W Gold Corsiar Carbide Air 240 
Mouse
Zowie 
  hide details  
Reply
I have Ryzen!
(13 items)
 
  
CPUMotherboardGraphicsRAM
Ryzen 5 1600 3.7GHz 1.3v MSI B350M Mortar Arctic Asus Strix RX470 4GB Corsair Vengance LPX 3200 16GB 
Hard DriveHard DriveCoolingOS
Intel 520 240GB Transcend 480GB Wraith Spire Windows 10 Pro x64 
MonitorKeyboardPowerCase
Dell UltraSharp U2412M CM Quick Fire (Brown Switches) Rosewill Valens 500W Gold Corsiar Carbide Air 240 
Mouse
Zowie 
  hide details  
Reply
post #7638 of 10701
Quote:
Originally Posted by Jayjr1105 View Post

No, that's pretty much on par with a BSOD. 1.49 volts is a lot for 5.0Ghz. Are you freezing while idle or running a stress test?

20 mins into stress testing. I guess I have a pretty bad chip.

4.5 stable @ 1.32
4.8 stable @ 1.475
I got 4.9 to run for 1hr 20 mins twice before crashing @ 1.48, so guessing I need like 1.5v to be stable at 4.9. I was just seeing if maybe it'll be more stable at 5.0 than 4.9.

I've used the same settings on other voltages for all of these tests, not sure if tweaking some would allow me to drop my vcore
PCH: 1.12
VTT: 1.12
PLL: 1.86

I have to decide if I'm okay with 1.475 for 24/7, but seeing as how a bunch of people here have been running similar voltage for almost a year, I guess it's fine
Edited by theyedi - 3/1/12 at 1:51pm
My System
(20 items)
 
  
CPUMotherboardGraphicsGraphics
5960x Rampage V Extreme GTX 980 Ti GTX 980 Ti 
GraphicsGraphicsRAMHard Drive
GTX 980 Ti GTX 980 Ti 16GB Intel X25-M G2 160GB Raid 0 
CoolingCoolingCoolingCooling
EK Supremacy EVO 2x MO-RA3 420 18x Noiseblocker PK-1 140mm MCP35X2 
OSMonitorPowerCase
7 Ultimate 3007WFP-HC Corsair AX1500i Antec 1200 
  hide details  
Reply
My System
(20 items)
 
  
CPUMotherboardGraphicsGraphics
5960x Rampage V Extreme GTX 980 Ti GTX 980 Ti 
GraphicsGraphicsRAMHard Drive
GTX 980 Ti GTX 980 Ti 16GB Intel X25-M G2 160GB Raid 0 
CoolingCoolingCoolingCooling
EK Supremacy EVO 2x MO-RA3 420 18x Noiseblocker PK-1 140mm MCP35X2 
OSMonitorPowerCase
7 Ultimate 3007WFP-HC Corsair AX1500i Antec 1200 
  hide details  
Reply
post #7639 of 10701
Quote:
Originally Posted by theyedi View Post

20 mins into stress testing. I guess I have a pretty bad chip.
4.5 stable @ 1.32
4.8 stable @ 1.475
I got 4.9 to run for 1hr 20 mins twice before crashing @ 1.48, so guessing I need like 1.5v to be stable at 4.9. I was just seeing if maybe it'll be more stable at 5.0 than 4.9.
I've used the same settings on other voltages for all of these tests, not sure if tweaking some would allow me to drop my vcore
PCH: 1.12
VTT: 1.12
PLL: 1.86
I have to decide if I'm okay with 1.475 for 24/7, but seeing as how a bunch of people here have been running similar voltage for almost a year, I guess it's fine

I wouldn't call that a horrible chip. It's about average to be honest. 4.5 @ 1.32V is normal. Why are you so worried about 5.0? Sure its a nice achievement but your 580 is still your bottleneck even with your CPU clocked as low as 4.0 GHz. Get a nice stable 4.5-4.7 and call it a day. thumb.gif

And get that PLL down some. way too high.
I have Ryzen!
(13 items)
 
  
CPUMotherboardGraphicsRAM
Ryzen 5 1600 3.7GHz 1.3v MSI B350M Mortar Arctic Asus Strix RX470 4GB Corsair Vengance LPX 3200 16GB 
Hard DriveHard DriveCoolingOS
Intel 520 240GB Transcend 480GB Wraith Spire Windows 10 Pro x64 
MonitorKeyboardPowerCase
Dell UltraSharp U2412M CM Quick Fire (Brown Switches) Rosewill Valens 500W Gold Corsiar Carbide Air 240 
Mouse
Zowie 
  hide details  
Reply
I have Ryzen!
(13 items)
 
  
CPUMotherboardGraphicsRAM
Ryzen 5 1600 3.7GHz 1.3v MSI B350M Mortar Arctic Asus Strix RX470 4GB Corsair Vengance LPX 3200 16GB 
Hard DriveHard DriveCoolingOS
Intel 520 240GB Transcend 480GB Wraith Spire Windows 10 Pro x64 
MonitorKeyboardPowerCase
Dell UltraSharp U2412M CM Quick Fire (Brown Switches) Rosewill Valens 500W Gold Corsiar Carbide Air 240 
Mouse
Zowie 
  hide details  
Reply
post #7640 of 10701
Hi, as you can see, I have 2500k paired with Asrock pro3 gen3-mobo.

Now, I have been running mild overclock of 4,2ghz pretty much on autosettings (vcore sits around 1,28 at full load) and it has worked fine for 3-4weeks.

So I tried 4,5ghz and upped offset to +0,05v (minimum value my mobo allows me to increase...) and run 1792FFT since I found it is more demanding than 1344. It runs fine first, vcore fluctuates like hell however, for the most part it sits between 1,32 and 1,33 but as soon as it hits 1,304 boom, BSOD and an error code BCcode101 (more vcore). BTW at 4,4ghz it passed 20mins of both runs using same settings, so I am pretty sure that 4,5 would pass too if vcore wouldnt drop so low and would stay at 1,32-1.33v....

Now, is there anything I can do about that vdroop since I DONT have LLC option in my bios?? Anyone else using same board with some sort of success?? Temperatures were around 58-62c btw,
My System
(15 items)
 
  
CPUMotherboardGraphicsRAM
i7 2600k @4,5GHz @1,336V Asus P8Z68-V/Gen3 MSI HD7950 TFIII @1150/1500Mhz@1,1v  8gb Team group Vulcan 2133MHz 
Hard DriveHard DriveOptical DriveCooling
Samsung spinpoint F3 1TB WD Caviar blue 1TB LG Coolink Corator DS 
OSMonitorKeyboardPower
Win7 home 64bit BENQ G2320HDB @72Hz 4+ years old fujitsu siemens XFX core edition pro 750w 
CaseMouseMouse Pad
Antec 300 ultimate Logitech G5 steelseries WOW-edition 
  hide details  
Reply
My System
(15 items)
 
  
CPUMotherboardGraphicsRAM
i7 2600k @4,5GHz @1,336V Asus P8Z68-V/Gen3 MSI HD7950 TFIII @1150/1500Mhz@1,1v  8gb Team group Vulcan 2133MHz 
Hard DriveHard DriveOptical DriveCooling
Samsung spinpoint F3 1TB WD Caviar blue 1TB LG Coolink Corator DS 
OSMonitorKeyboardPower
Win7 home 64bit BENQ G2320HDB @72Hz 4+ years old fujitsu siemens XFX core edition pro 750w 
CaseMouseMouse Pad
Antec 300 ultimate Logitech G5 steelseries WOW-edition 
  hide details  
Reply
New Posts  All Forums:Forum Nav:
  Return Home
  Back to Forum: Intel CPUs
  • [Official] The Sandy Stable Club **Guides, Voltages, Temps & BIOS Templates** Inc SPREADSHEET
Overclock.net › Forums › Intel › Intel CPUs › [Official] The Sandy Stable Club **Guides, Voltages, Temps & BIOS Templates** Inc SPREADSHEET