Overclock.net › Forums › Intel › Intel CPUs › [Official] The Sandy Stable Club **Guides, Voltages, Temps & BIOS Templates** Inc SPREADSHEET
New Posts  All Forums:Forum Nav:

[Official] The Sandy Stable Club **Guides, Voltages, Temps & BIOS Templates** Inc SPREADSHEET - Page 973

post #9721 of 10701
Help get me stable please!!
post #9722 of 10701
Quote:
Originally Posted by Big-Pete View Post

go for a manual voltage bro, im at 4.6 at 1.300v on a 2600k. on air and wont break 60c under folding. thumb.gif

 

Manual is no good. Still needs ~1.415 vore. Or I'm messing up some where else. I'll try to get some shots of my bios later tonight. 

post #9723 of 10701
Need help trying to get my stuff as cool as possible.

Setup is as follows:

NZXT Phantom 410
ASUS P8Z68-V/GEN3 Mobo
i5 2500K @ 4.5GHz (1.275 or 1.280V, can't remember)
Corsair H100i w/ 2 x Corsair SP120 Quiet Editions pushing air out - Used MX-4 thermal paste , small pea size (Although some say you don't apply it this way for the Corsair Hydro coolers? Maybe this is why my temps are a bit higher?)
1 x Corsair AF140 Quiet Edition - Side intake
2 x Corsair AF120 Quiet Edition - Front intake
1 x Corsair AF120 Quiet Edition - Rear exhaust

Highest temps under full load @ 4.5GHz - 61-64-63-59

What settings should I put in my BIOS in terms of LLC, VRM Frequency and all of that? Not sure if there's any settings I should change or anything like that. VCore hovers between 1.280 and 1.288ish under full load in CPU-Z.

Also, what's the best way to remove thermal paste? I have 99% pure IPA here.
Edited by Mackem - 1/22/13 at 7:56am
Home
(16 items)
 
  
CPUMotherboardGraphicsRAM
Intel i5 2500K @ 4.5GHz - 1.240V Asus P8Z68-V/GEN3 Asus R9 280X DirectCU II TOP 16GB Corsair XMS3 1600MHz 
Hard DriveHard DriveCoolingOS
Samsung 840 EVO 250GB Seagate Barracuda 2TB HDD Corsair H100i Windows 8.1 Pro 64 Bit 
MonitorMonitorKeyboardPower
LG IPS234V LG IPS234V CM Storm QuickFire Rapid - MX Brown Corsair AX750 
CaseMouseMouse Pad
NZXT Phantom 410 Black Razer Deathadder 2013 Steelseries QcK Mass 
  hide details  
Reply
Home
(16 items)
 
  
CPUMotherboardGraphicsRAM
Intel i5 2500K @ 4.5GHz - 1.240V Asus P8Z68-V/GEN3 Asus R9 280X DirectCU II TOP 16GB Corsair XMS3 1600MHz 
Hard DriveHard DriveCoolingOS
Samsung 840 EVO 250GB Seagate Barracuda 2TB HDD Corsair H100i Windows 8.1 Pro 64 Bit 
MonitorMonitorKeyboardPower
LG IPS234V LG IPS234V CM Storm QuickFire Rapid - MX Brown Corsair AX750 
CaseMouseMouse Pad
NZXT Phantom 410 Black Razer Deathadder 2013 Steelseries QcK Mass 
  hide details  
Reply
post #9724 of 10701
Change those fans on the h100 if you want lower temps. The quiet editions static pressure sucks.
w00t
(18 items)
 
   
CPUMotherboardGraphicsRAM
ph2 x20be asus m4a785-m sapphire vapor-x 4850  geil black dragon 1066 5-5-5-15-20 
Hard DriveOptical DriveCoolingOS
wd  asus dvd multi-write arctic cooling freezer 64 pro win 7 ultimate x64 
MonitorKeyboardPowerCase
samsung 42" lcd logitech wireless antec basic 500watt old dell crap 
MouseAudio
logitech wireless pioneer 7.1 
  hide details  
Reply
w00t
(18 items)
 
   
CPUMotherboardGraphicsRAM
ph2 x20be asus m4a785-m sapphire vapor-x 4850  geil black dragon 1066 5-5-5-15-20 
Hard DriveOptical DriveCoolingOS
wd  asus dvd multi-write arctic cooling freezer 64 pro win 7 ultimate x64 
MonitorKeyboardPowerCase
samsung 42" lcd logitech wireless antec basic 500watt old dell crap 
MouseAudio
logitech wireless pioneer 7.1 
  hide details  
Reply
post #9725 of 10701
Should I put the stock fans back on?
Home
(16 items)
 
  
CPUMotherboardGraphicsRAM
Intel i5 2500K @ 4.5GHz - 1.240V Asus P8Z68-V/GEN3 Asus R9 280X DirectCU II TOP 16GB Corsair XMS3 1600MHz 
Hard DriveHard DriveCoolingOS
Samsung 840 EVO 250GB Seagate Barracuda 2TB HDD Corsair H100i Windows 8.1 Pro 64 Bit 
MonitorMonitorKeyboardPower
LG IPS234V LG IPS234V CM Storm QuickFire Rapid - MX Brown Corsair AX750 
CaseMouseMouse Pad
NZXT Phantom 410 Black Razer Deathadder 2013 Steelseries QcK Mass 
  hide details  
Reply
Home
(16 items)
 
  
CPUMotherboardGraphicsRAM
Intel i5 2500K @ 4.5GHz - 1.240V Asus P8Z68-V/GEN3 Asus R9 280X DirectCU II TOP 16GB Corsair XMS3 1600MHz 
Hard DriveHard DriveCoolingOS
Samsung 840 EVO 250GB Seagate Barracuda 2TB HDD Corsair H100i Windows 8.1 Pro 64 Bit 
MonitorMonitorKeyboardPower
LG IPS234V LG IPS234V CM Storm QuickFire Rapid - MX Brown Corsair AX750 
CaseMouseMouse Pad
NZXT Phantom 410 Black Razer Deathadder 2013 Steelseries QcK Mass 
  hide details  
Reply
post #9726 of 10701
Hi!

I'm new to overclocking, and I got a question.

My specs:
CPU: i5 2500k
CPU Cooler: Noctua D14
Mobo: ASUS P8Z68-V PRO/GEN3
Memory: Corsair 16GB (4x4096MB) CL9 1600Mhz VENGEANCE
GPU: GTX 580

Fans:
Front:
Stock Fractal design R3 Fan + Noctua
Upper: Noctua
Back: Stock
Under: Stock
Code:
[U][B]BIOS:[/B][/U]
----
[B]AI Tweaker[/B]
AI Overclock Tuner: Manual
By All Cores: 45
Memory Frequency: DDR3-1600MHz
EPU Power Saving Mode: Disabled
-----
Load-Line Calibration: Extreme
VRM Frequency: Auto
Phase Control: Etreme
Duty Control: Extreme
-----
CPU Voltage: 1.350
DRAM Voltage: 1.5
VCCIO Voltage: 1.1
CPU Spread Spectrum: Disabled
-----
[B]Advanced
[/B]
CPU Ratio: Auto
Intel Adaptive Thermal Monitor: Disabled
Active Processor Cored: All
Limit CPUID Maximum: Disabled
Execute Disable bit: Enabled
Enhanced Intel Speedstep Technology: Enabled
Turbo Mode: Enabled
CPU C1E: Disabled
CPU C3 Report: Disabled
CPU C6 Report: Disabled
-------
[B]Monitor[/B]
CPU Q-Fan control: Disabled
Chassis Q-Fan control: Disabled
---
The question:

I tried to overclock it from 3.3Ghz to 4.5Ghz, it was stable at about 54-60temp full load
Altough in the middle of playing a game my computer froze, I don't know if this was the overclock or not?
(The sound started to repeat aswell)


Thanks in advance!
Edited by Mejk - 1/24/13 at 9:31am
post #9727 of 10701
Quote:
Originally Posted by Mejk View Post

Hi!

I'm new to overclocking, and I got a question.

My specs:
CPU: i5 2500k
CPU Cooler: Noctua D14
Mobo: ASUS P8Z68-V PRO/GEN3
Memory: Corsair 16GB (4x4096MB) CL9 1600Mhz VENGEANCE

Fans:
Front:
Stock Fractal design R3 Fan + Noctua
Upper: Noctua
Back: Stock
Under: Stock

The question:

I tried to overclock it from 3.3Ghz to 4.5Ghz, it was stable at about 54-60temp full load
Altough in the middle of playing a game my computer froze, I don't know if this was the overclock or not?


Thanks in advance!

Welcome to the forums...

There are guides here you can follow for overclocking your CPU (should be able to search this sub-forum on "Sandy Bridge Overclocking Guide").

You'll need to provide more information about your build -- in the old days, a GPU driver issue could have caused this, but more likely now you'd have a TDR timeout and you'd crash back to the desktop with a taskbar message.

Locate a guide that explains the BIOS settings, and try working up in smaller increments -- see if you can get it stable at 4.0 or 4.2, for example, and then work up from there an integer at a time.

Good luck...
post #9728 of 10701
Quote:
Originally Posted by stahlhart View Post

Welcome to the forums...

There are guides here you can follow for overclocking your CPU (should be able to search this sub-forum on "Sandy Bridge Overclocking Guide").

You'll need to provide more information about your build -- in the old days, a GPU driver issue could have caused this, but more likely now you'd have a TDR timeout and you'd crash back to the desktop with a taskbar message.

Locate a guide that explains the BIOS settings, and try working up in smaller increments -- see if you can get it stable at 4.0 or 4.2, for example, and then work up from there an integer at a time.

Good luck...


Thanks!

I edited my last post.
post #9729 of 10701
I'd start by rolling back LLC to High from Extreme, or whatever name your BIOS gives to 75%. For Prime95 you may even in fact determine that leaving it off altogether aids stability (I ran for 24 hours without it). Can probably also roll back Phase and Duty Control as well; you shouldn't need them that far up for 4.5GHz.

See if you can get offset mode working for your Vcore -- there's also a guide for this as well. You can save some wear and tear on your CPU and save energy by idling it down when there's no processing load applied. You'll need to enable C1E for this.

Set your RAM timings manually, if you currently have them set with XMP.
post #9730 of 10701
Quote:
Originally Posted by stahlhart View Post

I'd start by rolling back LLC to High from Extreme, or whatever name your BIOS gives to 75%. For Prime95 you may even in fact determine that leaving it off altogether aids stability (I ran for 24 hours without it). Can probably also roll back Phase and Duty Control as well; you shouldn't need them that far up for 4.5GHz.

See if you can get offset mode working for your Vcore -- there's also a guide for this as well. You can save some wear and tear on your CPU and save energy by idling it down when there's no processing load applied. You'll need to enable C1E for this.

Set your RAM timings manually, if you currently have them set with XMP.


I'll do that, I also found this http://www.overclock.net/t/1100100/info-intel-2500k-2600k-overclocking-tips
Think its good to follow?
New Posts  All Forums:Forum Nav:
  Return Home
  Back to Forum: Intel CPUs
  • [Official] The Sandy Stable Club **Guides, Voltages, Temps & BIOS Templates** Inc SPREADSHEET
Overclock.net › Forums › Intel › Intel CPUs › [Official] The Sandy Stable Club **Guides, Voltages, Temps & BIOS Templates** Inc SPREADSHEET