Overclock.net › Forums › Intel › Intel CPUs › [Official] The Sandy Stable Club **Guides, Voltages, Temps & BIOS Templates** Inc SPREADSHEET
New Posts  All Forums:Forum Nav:

[Official] The Sandy Stable Club **Guides, Voltages, Temps & BIOS Templates** Inc SPREADSHEET - Page 994

post #9931 of 10701
Quote:
Originally Posted by phazer11 View Post


Go to this post it's a fairly good guide.
http://www.overclock.net/t/968053/official-the-sandy-stable-club-guides-voltages-temps-bios-templates-inc-spreadsheet/2240#post_14466483

Also my post about my own set of questions is on the last page if someone would be so kind to look.

Thanks for the tip, I have been working according this guide however, I seem only to get in BSOD city. Quite annoying, however, I do not give up that easily. Going to try again on my day off tomorrow,
post #9932 of 10701
Changed my CPU IO Voltage to 1.15 and PLL to 1.6 along with enabling Spread Spectrum. Started up a 1344 P95 and x124 BSOD'd after about a minute.

Went back into the bios, changed PLL to 1.55 (motherboard only allows changing PLL in 0.05 increments for some reason) and started up a 1344 P95 (albeit with 6500 MB instead of my usual 7000MB) and passed 15 minutes. I started a 1792 P95 and upped the memory back to 7000MB and crashed (screen artifact) after about 4 minutes. Going to try the 1792 P95 again but with 6500 MB this time. Could my crashing be because I'm running out of RAM?
post #9933 of 10701
Quote:
Originally Posted by xD4rkFire View Post


Went back into the bios, changed PLL to 1.55 (motherboard only allows changing PLL in 0.05 increments for some reason)

Did you try directly typing the numbers?
post #9934 of 10701
Yep, when I tried to type in values like 1.51 and 1.52, it would just go back to 1.5.

I'm using an MSI Z77A GD65 with the latest bios (10.8)

Okay, looks like upping the core voltage helped me gain stability. Went from 1.3v to 1.315v and passed 15 minutes each of 1344 and 1792 P95.

Edit: Okay, looks like I'm finally stable. 47 multiplier ; 1.35vcore ; 1.55 PLL ; IO 1.15
CPU-Z reported only 1.328v while testing under P95 though. Also, I had spread spectrum off so my base clock was between 99 and 100 (99.78 or something like that) and I only had 4689mhz. Is this something I should look into fixing or am I okay? Also, it seems that my system isn't going to idle clocks when I'm at my desktop or things like that.

Ran a 1344 P95 test for 15 minutes and then a 1792 P95 test for 1 hour and everything seems okay. Now I just have to figure out how to use an offset voltage.
Edited by xD4rkFire - 2/15/13 at 9:01pm
post #9935 of 10701
Alright, small question. I'm up to 4.6gzh atm and so far stable (1344&1792). What I noticed is that CPU-Z gives me a 1.384v on full load and the VID is 1.3811. So IF I were to be getting a BSOD 124, would that indicate having to change the PLL/VTT voltage? This assumption is purely based on face validity, i'm not lacking Vcore voltage, since CPU-Z says 1.384v and VID (currently using right(?)) 1.3811v.

I am allowed to interpret it like this or am I terribly wrong?

Thanks
post #9936 of 10701
the vid (svid) you see in realtemp is the vcore the cpu theoretically needs to boot into windows. sometimes you need more and sometimes you need less to boot into windows. its the same with the amount you need to be stable under 100% load, maybe more or maybe less. its all trial and error.
the only times svid is actually useful is when figuring offset and for some people who use it to bin chips.

*EDIT* spelled vid as vis. im tired. shhhhh
Edited by pc-illiterate - 2/16/13 at 9:56am
w00t
(18 items)
 
   
CPUMotherboardGraphicsRAM
ph2 x20be asus m4a785-m sapphire vapor-x 4850  geil black dragon 1066 5-5-5-15-20 
Hard DriveOptical DriveCoolingOS
wd  asus dvd multi-write arctic cooling freezer 64 pro win 7 ultimate x64 
MonitorKeyboardPowerCase
samsung 42" lcd logitech wireless antec basic 500watt old dell crap 
MouseAudio
logitech wireless pioneer 7.1 
  hide details  
Reply
w00t
(18 items)
 
   
CPUMotherboardGraphicsRAM
ph2 x20be asus m4a785-m sapphire vapor-x 4850  geil black dragon 1066 5-5-5-15-20 
Hard DriveOptical DriveCoolingOS
wd  asus dvd multi-write arctic cooling freezer 64 pro win 7 ultimate x64 
MonitorKeyboardPowerCase
samsung 42" lcd logitech wireless antec basic 500watt old dell crap 
MouseAudio
logitech wireless pioneer 7.1 
  hide details  
Reply
post #9937 of 10701
Thanks, step by step I'll get the hang of it smile.gif
post #9938 of 10701
BSOD Codes for Sandy Bridge

0x124 = add/remove vcore or QPI/VTT voltage (usually Vcore, once it was QPI/VTT)
0x101 = add more vcore
0x50 = RAM timings/Frequency add DDR3 voltage or add QPI/VTT
0x1E = add more vcore
0x3B = add more vcore
0xD1 = add QPI/VTT voltage
“0x9C = QPI/VTT most likely, but increasing vcore has helped in some instances”
0X109 = add DDR3 voltage
0x0A = add QPI/VTT voltage
Z170s
(23 photos)
  
Reply
Z170s
(23 photos)
  
Reply
post #9939 of 10701
I seem to have a stable OC now on 4.7ghz. I might go higher later. The temps max temps are 67/71/74/70 with a NH-D14. I have the feeling that they are not operating on a high rpm, but I cannot adjust them somehow. One of the fans actually gives a 0rpm.. And the other ones stick on 1000-1200 rpm. Is it me, or is that quite low?
post #9940 of 10701
My 4.7gzh overclock is now stable with proper offset. However, it hangs around 1.480 around full load. While on 4.6ghz this is only 1.400. Should I consider going for 4.6gzh instead for durability or doesn't it really matter? I read something about the durability not going down linear, but exponentially while upping the vcore.
New Posts  All Forums:Forum Nav:
  Return Home
  Back to Forum: Intel CPUs
  • [Official] The Sandy Stable Club **Guides, Voltages, Temps & BIOS Templates** Inc SPREADSHEET
Overclock.net › Forums › Intel › Intel CPUs › [Official] The Sandy Stable Club **Guides, Voltages, Temps & BIOS Templates** Inc SPREADSHEET