Overclock.net › Forums › Intel › Intel - General › OC help QX6850
New Posts  All Forums:Forum Nav:

OC help QX6850

post #1 of 3
Thread Starter 
OK, I am totally new from OC-ing.

Here I am with the following spec:
Mobo: Gigabyte EP45_UD3P
CPU: Core 2 Extreme QX6850
Mem: 4G DDR2 Corsair Gaming
Video: GTS250
H50 cooler

I have been reading about OC-ing but still lost in a way. Can anyone suggest any setting so I can use it for now until I can fine tune it to better? I'd like to have it between 3.6Ghz and 4.0Ghz if possible. Thx all...
By the way in which section should I post about OC-ing?
post #2 of 3
The easiest way would be to up the multiplier since you're using an extreme edition chip. Up the voltage as needed.
post #3 of 3
Thread Starter 
There are so many settings. I am still confused. lolz
OK. I set the multiplier to 11 and Voltage to 1.35v
and this is what I see from CPU-Z
New Posts  All Forums:Forum Nav:
  Return Home
  Back to Forum: Intel - General
Overclock.net › Forums › Intel › Intel - General › OC help QX6850