Originally Posted by dagan
While you are here I have a question. Is there a way for you to share your bios settings to me or is it Private
I'm curious to see what others have. I tried the ones that has posted on my motherboard's club thread and it didn't work so good
My curiosity always directs me to QPI data rate link, Should I ALWAYS
leave that one to Smallest Value? Ignoring Slow mode right?
You should always leave the QPI on the smallest rate and ignore slow mode, correct. Also make sure your uncore multiplier is double your RAM speed, so like if you're running 1600mhz then it should be 3200mhz.
I run something along the lines of (don't know exact values, on my netbook atm):
CPU voltage: 1.2875v
CPU PLL: 1.74xxv
I think other voltages on auto.
Then I run 200 x 21 to get 4.2ghz, memory is at 2000mhz 9-9-9-27-88-1T at the stock 1.6v. Uncore is double that at 4000mhz, and my QPI link is at the lowest setting that isn't slow mode. My 920 is an okay clocker, so you may need a little or a lot more voltage depending on how good your chip is.