Overclock.net › Forums › Intel › Intel - General › Stable O/C now unstable??
New Posts  All Forums:Forum Nav:

Stable O/C now unstable?? - Page 2

post #11 of 14
Quote:
Originally Posted by Novaa View Post
its a 750, and its been to 4.4 @ 1.345vcore, although i would never even try to run it at that on a H50 esp 24/7 since the idle temps are well into the high 40s and the load out is close to 90 which im not comfortable with.

i did start @ 1.3v @ 3.8 and worked my way back to as low as i could setting by setting with 30 cycles of IBT until it bluescreened then worked my way back up till it sat stable @ 30, then i increased to 50 cycles and then to 75 just to be sure. then i started my prime95 test to be 100% certain. its been set like that ever since.



Thought about this idea, but is 12 months long enough for that to happen to this degree?
Ouch, yes 90C would make me uneasy too. Try those memory settings and yeah, 12 months is actually rather long for degradation to show. Usually if you're going to see a decrease because of too much voltage or high temps you'd see it in around 6 months or so?

See it's a damn shame Intel like to change sockets all the time, because when I was on 775 I had a tonne of CPU's to use as testing to eliminate other parts Does anyone have a LGA1156 CPU you can nick for an hour or two to test?
    
CPUMotherboardGraphicsRAM
Intel i5 2500 @ 4,004GHz (1.202v) Asus P8P67-PRO B3 Leadtek GTX260 65nm 896MB 700|1430|1100 4GB DDR3 Muskin 1686MHz 
Hard DriveOptical DriveOSMonitor
2xWD CB 250GB, 2x SG 320GB, 1xSS F1 1TB Pioneer DVD-RW Windows 7 Professional 64bit Samsung 2032BW 20" 1680x1050 16:10 
KeyboardPowerCaseMouse
Razer Lycosa CoolerMaster GX 550W Coolermaster Storm Sniper Razer DeathAdder 
Mouse Pad
Razer Goliathus 
  hide details  
Reply
    
CPUMotherboardGraphicsRAM
Intel i5 2500 @ 4,004GHz (1.202v) Asus P8P67-PRO B3 Leadtek GTX260 65nm 896MB 700|1430|1100 4GB DDR3 Muskin 1686MHz 
Hard DriveOptical DriveOSMonitor
2xWD CB 250GB, 2x SG 320GB, 1xSS F1 1TB Pioneer DVD-RW Windows 7 Professional 64bit Samsung 2032BW 20" 1680x1050 16:10 
KeyboardPowerCaseMouse
Razer Lycosa CoolerMaster GX 550W Coolermaster Storm Sniper Razer DeathAdder 
Mouse Pad
Razer Goliathus 
  hide details  
Reply
post #12 of 14
Quote:
Originally Posted by Novaa View Post
unfortunately, my board doesnt have a 12x multi if i use xmp it automatically changes my blk to 220 anyways. also the table printed on the box states 1.5v even under xmp settings, although i have already been and looked at settings online for these sticks and used the 1.65v, no dice. I also used a second set of Team elite sticks at stock settings, still bluescreened, same messages which leads me to asume its not the ram hence why im looking for an answer here
Okey doke, mate I don't think I can be much more help here, though. Best advice is below. I'd start going through your Windows Error Logs and see if any of those error codes show themselves!

Good luck!
Quote:
Originally Posted by overclocker23578 View Post
0x101 = increase vcore
0x124 = increase/decrease vcore or QPI/VTT...have to test to see which one it is
0x0A = unstable RAM/IMC, increase QPI first, if that doesn't work increase vcore
0x1E = increase vcore, or lower RAM frequency/ increase RAM voltage
0x3B = increase vcore, or lower RAM frequency/ increase RAM voltage
0xD1 = QPI/VTT, increase/decrease as necessary
0x9C = QPI/VTT most likely, but increasing vcore has helped in some instances
0x50 = RAM timings/Frequency or uncore multi unstable, increase RAM voltage or adjust QPI/VTT, or lower uncore if you're higher than 2x
0x116 = Low IOH (NB) voltage, GPU issue (most common when running multi-GPU/overclocking GPU)
0x00000109 = Not enough or too Much memory voltage
0x7E = System Drivers issue
0x24 = Disk corruption (Did you OC the PCI-E bus?)
    
CPUMotherboardGraphicsRAM
Intel i5 2500 @ 4,004GHz (1.202v) Asus P8P67-PRO B3 Leadtek GTX260 65nm 896MB 700|1430|1100 4GB DDR3 Muskin 1686MHz 
Hard DriveOptical DriveOSMonitor
2xWD CB 250GB, 2x SG 320GB, 1xSS F1 1TB Pioneer DVD-RW Windows 7 Professional 64bit Samsung 2032BW 20" 1680x1050 16:10 
KeyboardPowerCaseMouse
Razer Lycosa CoolerMaster GX 550W Coolermaster Storm Sniper Razer DeathAdder 
Mouse Pad
Razer Goliathus 
  hide details  
Reply
    
CPUMotherboardGraphicsRAM
Intel i5 2500 @ 4,004GHz (1.202v) Asus P8P67-PRO B3 Leadtek GTX260 65nm 896MB 700|1430|1100 4GB DDR3 Muskin 1686MHz 
Hard DriveOptical DriveOSMonitor
2xWD CB 250GB, 2x SG 320GB, 1xSS F1 1TB Pioneer DVD-RW Windows 7 Professional 64bit Samsung 2032BW 20" 1680x1050 16:10 
KeyboardPowerCaseMouse
Razer Lycosa CoolerMaster GX 550W Coolermaster Storm Sniper Razer DeathAdder 
Mouse Pad
Razer Goliathus 
  hide details  
Reply
post #13 of 14
Thread Starter 
Quote:
Originally Posted by Genjimaru View Post
Perhaps a bad PSU? How old is that PSU?
Didn't think of that, but then again the PSU is about 6 months old, i re-used my old PSU when i originally built the system and replaced it when it looked to be on the fritz about 6 months ago, no problems up until now.
Daily Gamer
(13 items)
 
  
CPUMotherboardGraphicsRAM
i5-750 @ 3.30 Gigabyte P55-USB3 Palit GTX580 V2 Gskill Pi @ 2200 
Hard DriveOptical DriveOSMonitor
WD Black 500GB, WD Blue 320GB Random LG Drive Windows 7 Ultimate 64-bit Samsung B2230 + Acer P193W 
KeyboardPowerCaseMouse
Logitech G19 750W Aywun Silverstone Raven RV01 Logitech G9x 
Mouse Pad
Razer Fragged Midsize (control) 
  hide details  
Reply
Daily Gamer
(13 items)
 
  
CPUMotherboardGraphicsRAM
i5-750 @ 3.30 Gigabyte P55-USB3 Palit GTX580 V2 Gskill Pi @ 2200 
Hard DriveOptical DriveOSMonitor
WD Black 500GB, WD Blue 320GB Random LG Drive Windows 7 Ultimate 64-bit Samsung B2230 + Acer P193W 
KeyboardPowerCaseMouse
Logitech G19 750W Aywun Silverstone Raven RV01 Logitech G9x 
Mouse Pad
Razer Fragged Midsize (control) 
  hide details  
Reply
post #14 of 14
Thread Starter 
Quote:
Originally Posted by Viridian View Post
Ouch, yes 90C would make me uneasy too. Try those memory settings and yeah, 12 months is actually rather long for degradation to show. Usually if you're going to see a decrease because of too much voltage or high temps you'd see it in around 6 months or so?

See it's a damn shame Intel like to change sockets all the time, because when I was on 775 I had a tonne of CPU's to use as testing to eliminate other parts Does anyone have a LGA1156 CPU you can nick for an hour or two to test?
unfortunately not, all my friends are cheap and bought amd... i have replacement or testing parts for everything apart from mobo/cpu since ive been a little strapped for cash lately.

Quote:
Originally Posted by Viridian View Post
Okey doke, mate I don't think I can be much more help here, though. Best advice is below. I'd start going through your Windows Error Logs and see if any of those error codes show themselves!

thanks will have to have a look.

Good luck!
Daily Gamer
(13 items)
 
  
CPUMotherboardGraphicsRAM
i5-750 @ 3.30 Gigabyte P55-USB3 Palit GTX580 V2 Gskill Pi @ 2200 
Hard DriveOptical DriveOSMonitor
WD Black 500GB, WD Blue 320GB Random LG Drive Windows 7 Ultimate 64-bit Samsung B2230 + Acer P193W 
KeyboardPowerCaseMouse
Logitech G19 750W Aywun Silverstone Raven RV01 Logitech G9x 
Mouse Pad
Razer Fragged Midsize (control) 
  hide details  
Reply
Daily Gamer
(13 items)
 
  
CPUMotherboardGraphicsRAM
i5-750 @ 3.30 Gigabyte P55-USB3 Palit GTX580 V2 Gskill Pi @ 2200 
Hard DriveOptical DriveOSMonitor
WD Black 500GB, WD Blue 320GB Random LG Drive Windows 7 Ultimate 64-bit Samsung B2230 + Acer P193W 
KeyboardPowerCaseMouse
Logitech G19 750W Aywun Silverstone Raven RV01 Logitech G9x 
Mouse Pad
Razer Fragged Midsize (control) 
  hide details  
Reply
New Posts  All Forums:Forum Nav:
  Return Home
  Back to Forum: Intel - General
Overclock.net › Forums › Intel › Intel - General › Stable O/C now unstable??