Just replaced my X650 Gold with X750 Gold as part of my 670 SLI upgrade. I thought since 650/750 are in the same sub-series(like 850/1050, same size, same plugs, share user manual) I could use my 650's cables instead of rewire everything and use my 750's cable. Booted the computer up, works fine through benchmarks, +3.3/+5/+12 all looks good, 3.3V a bit higher than before(3.376 vs 3.360), 12V a bit lower(12.197 vs 12.250), am I good or should I switch to my 750's cable?
I used my 750's Wall to PSU plug since on the manual the 750 have 10-5A input current instead of 650's 8-4A.
Don't have my 750's in case photo yet, once I upload that please add me.
p.s those of you with 650 Gold please check this for me, I confirmed one cable bag for 650 is the same as 750(same P/N:H number), I lost track of the other cable bag, does your 650 Gold have a cable bag that matches this number: P/N:H 5WKM244001BW?
Edited by sherlock - 9/17/12 at 7:55pm
I used my 750's Wall to PSU plug since on the manual the 750 have 10-5A input current instead of 650's 8-4A.
Don't have my 750's in case photo yet, once I upload that please add me.
p.s those of you with 650 Gold please check this for me, I confirmed one cable bag for 650 is the same as 750(same P/N:H number), I lost track of the other cable bag, does your 650 Gold have a cable bag that matches this number: P/N:H 5WKM244001BW?
Edited by sherlock - 9/17/12 at 7:55pm


















Though, hopefully you can tell by the cabling- because a picture doesn't exactly show it too well. Blame OCD and stickers!


